Pioneer DEH-1590UB Handleiding

Pioneer Autoradio DEH-1590UB

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Pioneer DEH-1590UB (24 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Owner’s Manual
CD RDS RECEIVER
DEH-1590UB
English
Thank you for purchasing this PIONEER
product
To ensure proper use, please read through this
manual before using this product. It is especially
important that you read and observe WARN-
INGs and CAUTIONs in this manual. Please
keep the manual in a safe and accessible place for
future reference.
About this unit
CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and over-
heating could result from contact with
liquids.
!Always keep the volume low enough to hear
outside sounds.
!Avoid exposure to moisture.
!If the battery is disconnected or discharged,
any preset memory will be erased.
Note
Function setting operations are completed even
if the menu is canceled before the operations
are confirmed.
About this manual
In the following instructions, USB memories
and USB audio players are collectively referred
to as β€œUSB storage device”.
In case of trouble
Should this unit fail to operate properly, please
contact your dealer or nearest authorized
PIONEER Service Station.
Visit our website
Visit us at the following site:
http://pioneer.jp/group/index-e.html
!We offer the latest information about
PIONEER CORPORATION on our website.
Head unit
c d
5
9
12 3 4 6 7
bae8
Part Part
1h(eject) 8(equalizer)
2SRC/OFF 9BAND
3MULTI-CONTROL
(M.C.)a
(back)/
DIMMER
(dimmer)
4(list) bc/d
5DISP/DISP OFF c1/to 6/
6Disc loading slot d
AUX input jack
(3.5 mm stereo
jack)
7USB port eDetach button
CAUTION
!Use an optional Pioneer USB cable (CD-
U50E) to connect the USB storage device as
any device connected directly to the unit will
protrude out from the unit, which could be
dangerous.
!Do not use unauthorized products.
Remote control
f
j
i
g
h
k
9
m
l
b
2
Part Operation
fVOLUME Press to increase or decrease
volume.
gMUTE Press to mute. Press again to
unmute.
ha/b
Press to recall preset stations.
Press to select the next/pre-
vious folder.
iAUDIO Press to select an audio func-
tion.
jDISP/SCRL
Press to select different dis-
plays.
Press and hold to turn dimmer
on or off.
kePress to pause or resume play-
back.
lFUNC-
TION Press to select functions.
mLIST/
ENTER
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
Press to display the list de-
pending on the source.
While in the operating menu,
press to control functions.
Before you start
2
Section
Operating this unit
En
01
02
Display indication
21 3 75
9
4 6 8
a
Indicator State
1(list) The list function is being oper-
ated.
2
Sub infor-
mation sec-
tion
Sub information is displayed.
3
TA (traffic
announce-
ments)
TA function is on.
4
TP (traffic
program
identifica-
tion)
A TP station is tuned in.
5(sound re-
triever)
The sound retriever function
is on.
6LOC Local seek tuning is on.
7(repeat) Track or folder repeat is on.
8(ran-
dom) Random play is on.
Indicator State
9
Main infor-
mation sec-
tion
!Tuner: band and fre-
quency
!RDS: program service
name, PTY information
and other literal informa-
tion
!CD player and USB stor-
age device: elapsed play-
back time and text
information
aAppears when a lower tier of
folder or menu exists.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
#If you do not operate for 30 seconds, the set up
menu will not be displayed.
#If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1Turn M.C. to adjust hour.
2Press M.C. to select minute.
3Turn M.C. to adjust minute.
4Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
!The tuning step remains at 50 kHz during man-
ual tuning.
1Turn M.C. to select the FM tuning step.
50 (50 kHz)β€”100 (100 kHz)
2Press M.C. to confirm the selection.
MW STEP (MW tuning step)
The MW tuning step can be switched between
9 kHz and 10 kHz.
1Turn M.C. to select the MW tuning step.
9(9 kHz)β€”10 (10 kHz)
2Press M.C. to confirm the selection.
QUIT appears.
5 To finish your settings, turn M.C. to select
YES.
#If you prefer to change your setting again, turn
M.C. to switch to NO. Press to select.
6 Press M.C. to select.
Notes
!You can set up the menu options from the
system menu. For details about the settings,
refer to System menu on page 7.
!You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
!Handle gently when removing or attaching
the front panel.
!Avoid subjecting the front panel to excessive
shock.
!Keep the front panel out of direct sunlight
and high temperatures.
!To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
English
Operating this unit
3
Section
Operating this unit
En
02


Product specificaties

Merk: Pioneer
Categorie: Autoradio
Model: DEH-1590UB

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer DEH-1590UB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autoradio Pioneer

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio