Pioneer CM-510ST Handleiding

Pioneer Speaker CM-510ST

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Pioneer CM-510ST (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 94 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
CM Series
http://pioneerproaudio.com
Installation and Instruction Manual
10β€³ Subwoofer
For installation and other support information, visit the above site.
CM-5 T10S
Introduction
Thank you for purchasing this product. Be sure to read the "Read Before Use" before using this product. Also, read the Installation
and Instruction Manual from the support site that can be viewed from the URL or QR code given here. You may require the Installation
and Instruction Manual in future, so keep them carefully at a safe location.
http://www.pioneerproaudio.com/en/sound/ceiling/surfacemountspeaker.html
Read Before Use (Important)
[For American Users (Pour les utilisateurs aux Γ‰tats-Unis)]
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
D36-AP9-1_A1_En
[For American Users and Canadian Users]
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without annoying blaring or
distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing β€œcomfort level” adapts to
higher volumes of sound, so what sounds β€œnormal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment
at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
β€’ξ˜ƒ Set your volume control at a low setting.
β€’ξ˜ƒ Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
β€’ξ˜ƒ Once you have established a comfortable sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
β€’ξ˜ƒ Do not turn up the volume so high that you can’t hear what’s around you.
β€’ξ˜ƒ Use caution or temporarily discontinue use in potentially hazardous situations.
β€’ξ˜ƒ Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
S001a_A1_En
[For European Users]
If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge
to designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent
potential negative effects on the environment and human health. K058b_B_En
WARNING
Installation
This loudspeaker should be installed by a professional installer.
There is a risk the loudspeaker may fall. Ask a professional
installer that possesses sufficient skills and experience to install
the loudspeaker. Two or more workers are also recommended for
installation.
AlphaTheta Corporation bears no responsibility for accidents and
damage resulting from deficient installation or mounting, misuse,
modifications, and/or natural disasters.
Only the workers installing the loudspeaker should be near it
during installation.
There is a risk of injury if parts fall.
Tighten the screws and bolts to the indicated torque.
Falling of screws and bolts may result in injury or accident.
Ensure safe installation by confirming the strength of the
installation location and checking the installation method.
Make sure that the floor or stage where you are installing the
loudspeaker can sufficiently handle its weight. Consult with a qualified
professional if you are unsure about the strength. If the installation
location or installation means such as installation fixtures, etc. do
not have enough strength to withstand the mass of the loudspeaker
system, it could result in falling of the loudspeaker. Also, be sure to
implement redundant safety measures such as by using wires, etc.
Arrange for wires with appropriate length and strength in consideration
of the loudspeaker weight and installation condition. Secure the fall
prevention wire on the building at a location different from where the
loudspeaker mount is secured on the building.
Do not install the loudspeaker in the following environments.
β€’ξ˜ƒ Locations with a large amount of oily smoke and smoke for theatrical
or stage performances.
β€’ξ˜ƒ Locations that are exposed to water.
β€’ξ˜ƒ Locations with a large amount of oily smoke, such as inside kitchens
or factories.
β€’ξ˜ƒ Unstable locations, such as those exposed to vibrations.
β€’ξ˜ƒ Locations where flammable materials are used, such as alcohols
and aerosol insecticides.
β€’ξ˜ƒ Locations affected by heat generation, such as near light fixtures or
heaters.
β€’ξ˜ƒ Locations exposed to direct sunlight.
β€’ξ˜ƒ Locations subject to extreme temperature changes.
Such conditions can cause the surface of the product and the wood to
contract, and deformation or discoloration of the enclosure and failure
of the loudspeaker. This may result in fire or the loudspeaker falling in
a worst case scenario.
Take precautions to prevent excessive humidity when rapidly
heating or cooling the room with an air conditioner or heater.
Do not place the loudspeaker near a window, etc.
Doing so could cause condensation to form on the inside of the
loudspeaker.
To avoid danger of electric shock, do not install the loudspeaker
outdoors or in humid locations.
This loudspeaker is designed for indoor use only.
Usage Methods
Be sure to inspect the loudspeaker after an earthquake.
A problem with the mounting part may occur, which could cause the
loudspeaker to fall.
Do not open or modify the interior of the loudspeaker.
The interior has high voltage components, and there is a risk of fire and
electric shock. Ask your dealer for inspection, maintenance, and repair
of the interior of the loudspeaker.
Do not pull out or insert the cables with wet hands.
This could result in an electric shock.
Immediately stop using the loudspeaker if a problem occurs.
If a problem occurs, such as smoke, an unusual odor, or the
loudspeaker is damaged by ingress of water or a foreign object,
immediately turn off the power to the amplifier that is used, and
then request repair. There is a risk of fire and electric shock if the
loudspeaker is used when there is a problem.
To prevent a fire hazard, do not place any naked flame sources (such
as a lighted candle) on the equipment.
Do not insert metallic or flammable objects into the holes on the
front of the loudspeaker, and do not allow those objects to fall into
the holes.
There is a risk of fire or electric shock if metallic or flammable objects
get inside the loudspeaker. Be particularly careful in homes with
children.
Do not place small parts within reach of young children.
Promptly consult with a physician if a small part is accidentally
swallowed.
Do not put your hand into the duct or openings of the
loudspeaker.
Doing so could result in injury.
Do not stand on or hang from the loudspeaker.
Pay particular attention to children around the loudspeaker. It could tip
over and become damaged, resulting in injury.
CAUTION
Installation
When connecting the loudspeaker to other equipment, turn off the
power to each piece of equipment.
Carefully read the user's manual for each piece of equipment, and
connect the equipment according to the description in the manual. In
addition, use the specified cords to connect the equipment. There is a
risk of electric shock.
Check the stability of the loudspeaker after mounting it to the wall
or ceiling.
Inspect the loudspeaker immediately after mounting it. In addition,
check the stability of the loudspeaker regularly.
When using commercially available mounting fixtures, make sure
they are strong enough to secure the loudspeaker.
Make sure to thoroughly read the precautions in this manual
and the instructions included with the commercially available
mounting fixtures. Take care not to place other equipment on top
of the loudspeaker. Failure to properly secure them can cause the
loudspeaker to fall and result in accidents.
Be careful of subwoofer vibrations.
When installing the loudspeaker in high locations, such as a stage, the
subwoofer vibrations can cause the loudspeaker to move, making it
fall to the floor, resulting in injury and accidents. Implement measures
to prevent the loudspeaker from slipping off the stage. The vibrations
of the subwoofer can cause other loudspeakers to shift from their
designated locations, so keep in mind the danger of such loudspeakers
tipping over and falling.
Usage Methods
Do not use the loudspeaker in the following states.
β€’ξ˜ƒ Do not exceed the permissible input.
β€’ξ˜ƒ If greatly increasing sounds with a equalizer, do not increase the
volume too much.
β€’ξ˜ƒ Do not force the loudspeaker to produce loud sounds with a low
output power amplifier.
β€’ξ˜ƒ Do not use the loudspeaker for a long period of time when the sound
is distorted.
The loudspeaker may be damaged, resulting in heat generation and
fire.
Turn the volume all the way down before turning on the power and
changing the connection.
There is a risk of hearing loss and other problems if the loudspeaker
suddenly produces a loud sound.
Do not listen to the loudspeaker at high volumes for a long period
of time.
There is a risk of hearing loss.
ALSO TAKE NOTE OF THE FOLLOWING
CAUTIONS
Installation
Use the loudspeaker within the specified range of load impedance
of the amplifier.
When connecting the loudspeakers in parallel, always connect within
the specified range of load impedance of the amplifier. Failure to do so
could result in malfunctioning of the amplifier.
About high-impedance connections
During a high-impedance connection, take note that the total output of
each speaker does not exceed the rated output of the power amplifier.
Install the loudspeaker in accordance with the law.
Install the loudspeaker in accordance with all applicable laws, such as
related rules and regulations.
Usage Methods
Do not wipe the loudspeaker with alcohol, thinner, benzene, etc.
Wipe gently with a soft cloth during maintenance. If the loudspeaker
is very dirty, wipe off the dirt with a soft cloth that has been immersed
in a neutral detergent diluted up to 5 to 6 times with water, and then
thoroughly squeezed. Thereafter, wipe with a dry cloth. Deposition
of alcohol, thinner, benzene, and pesticides may cause peeling of
prints or coatings. Also, exposing the loudspeaker to rubber and vinyl
products for a long time may harm the cabinet, and must therefore
be avoided. If you are using a chemical dust cloth, be sure to read
the precautions appended with the chemical dust cloth. Remove the
cables when performing maintenance.
This product may not be repainted.
Do not paint the surface of the product. Doing so could result in
deteriorating the cabinet, causing cracks, deformation, damaging
loudspeaker unit performance, and resulting in strange noises and
shorts.
Only use the loudspeaker to play audio in a frequency band run
through the recommended audio DSP filter.
All illustrations in this manual are provided to explain the operation
of the loudspeaker. Therefore, some illustrations may differ from the
actual specifications.

Product specificaties

Merk: Pioneer
Categorie: Speaker
Model: CM-510ST

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer CM-510ST stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Pioneer

Pioneer

Pioneer RM-07 Handleiding

15 November 2024
Pioneer

Pioneer XPRS1182ST Handleiding

18 Mei 2024
Pioneer

Pioneer XPRS1152ST Handleiding

18 Mei 2024
Pioneer

Pioneer XPRS152 Handleiding

18 Mei 2024
Pioneer

Pioneer UD-RP351PRO Handleiding

15 Augustus 2023
Pioneer

Pioneer TS-B401PRO Handleiding

15 Augustus 2023
Pioneer

Pioneer TS-B351PRO Handleiding

15 Augustus 2023
Pioneer

Pioneer UD-RP401PRO Handleiding

14 Augustus 2023
Pioneer

Pioneer CM-510ST Handleiding

29 Juni 2023
Pioneer

Pioneer Elite S-IW891 Handleiding

24 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Harman Kardon

Harman Kardon Luna Handleiding

15 November 2024
Harman Kardon

Harman Kardon Onyx Studio 8 Handleiding

15 November 2024
Lexon

Lexon Terrace Handleiding

15 November 2024
JBL

JBL On Air Control 2.4G Handleiding

15 November 2024
JBL

JBL Control 68HP Handleiding

15 November 2024
Soundcore

Soundcore Anker Mini 2 Handleiding

15 November 2024
Klipsch

Klipsch DS-180CSM Handleiding

15 November 2024
Klipsch

Klipsch Heritage The One Handleiding

15 November 2024
Klipsch

Klipsch RIC-65 Handleiding

15 November 2024
LD Systems

LD Systems ICOA 15 Handleiding

14 November 2024