Phoenix Gold ZR10P Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Phoenix Gold ZR10P (8 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
10” POWERFUL COMPACT ACTIVE SUBWOOFER
Model: ZR10P
POWER RMS 200W (400W Max)
THD <0.5%
SIGNAL-TO-NOISE RATIO >90dB
FREQUENCY RESPONSE 20Hz - 150Hz
INPUT SENSITIVITY (HIGH LEVEL) 1.0V
INPUT SENSITIVITY (LOW LEVEL) 300mV
LOW PASS FILTER 50Hz - 150Hz
BASS BOOST 0 to 12dB
SUBSONIC FILTER 20Hz
FUSE RATING 25A
DIMENSIONS - MM (L x W x H) 340 x 245 x 78
SPECIFICATIONS
ZR
400W MAX POWER
All specications subject to change without notice.
ZR10P Owners Manual
© 2021 Phoenix Gold • www.phoenixgold-eu.com
ZR10P - ACTIVE SUBWOOFER
Features
• 10" Active powerful compact subwoofer
• 200W RMS 400W Max
• Autostart on high-level input
• Remote gain control
• High and low level input
• Power & high-level cable quick
connector
• Aluminium casing
• Subsonic lter at 30Hz
• Phase control
• Variable bass boost 0-12dB
• Dimensions - 340mm x 245mm x 78mm
Specikationer
• 10” kompakt aktiv subwoofer
• 200W RMS 400W Max
• Autostart på högnivåingångarna
• Volymkontoll via kabelburen fjårrkontroll
• Hög och lågnivåingångar
• Ström, samt högnivåingångar via
snabbkontakter
• Aluminiumkabinett
• Subsonic-lter vid 30Hz
• Faskontroll
• Variabel basfor boost 0-12dB
• Dimensioner - 340mm x 245mm x 78mm
Spezikation
• kompakter aktiver 10” Subwoofer
• 200W RMS 400W max
• Autostart bei High-Level-Eingabe
• Lautstärkeregelung per Fernbedienung
• High und Low Level Eingang
• Schnellkupplung für Strom- und
High-Level-Kabel
• Aluminiumgehäuse
• Subsoniclter bei 30Hz
• Phasensteuerung
• Variabler Bass Boost 0-12dB
• Abmessungen - 340mm x 245mm x 78mm
Caracteristiques
techniques
• Subwoofer actif compact de 10 pouces
• 200W RMS 400W maximum
• Démarrage automatique sur une entrée
de haut niveau
• Contrôle de gain à distance
• Entrée haut et bas niveau
• Connecteur rapide de câble
d’alimentation et de haut niveau
• Boîtier en aluminium
• Filtre subsonique à 30Hz
• Contrôle de phase
• Amplication des basses variable 0-12dB
• Dimensions - 340mm x 245mm x 78mm
Caracteristicas
• Subwoofer de 10” active compacto
• 200W RMS 400W Máximo
• lnicio automático de entrada de alto nivel
• Control remote de ganancia
• Entrada de nivel alto y bajo
• Conector rápido de cable de
alimentaciĂłn y alto nivel
• Carcasa de aluminio
• Filtro subsónico a 30Hhz
• Control de fase
• lncremento de graves variable 0-12dB
• Dimensiones - 340mm x 245mm x 78mm
• Subwoofer attivo compatto da 10”
• 200W RMS 400W massimo
• Awio automatico su input di alto livello
• Controllo remoto del guadagno
• lngresso di alto e basso livello
• Connettore rapido per cavo di
alimentazione e di alto livello
• Rivestimento in alluminio
• Filtro subsonico a 30Hz
• Controllo di fase
• Aumento dei bassi variabile 0-12dB
• Dimensioni: 340mm x 245mm x 78mm
Caratteristiche
tecniche
© 2021 Phoenix Gold • www.phoenixgold-eu.com
ZR10P Owners Manual
ZR10P - ACTIVE SUBWOOFER
A. POWER STATUS LED
PANEL CONTROLS & FEATURES
A
B
C D E F G H I J
K
This bi-color LED glows green when power is on and no problems are present. If one of the
protection circuits comes on, it will change to red.
B. PHASE SHIFT
Use this switch to help compensate for time alignment problems in the system. Such
problems usually result from having the subwoofer at a different distance from the listener
than the other speakers in the system.
C. AUTO POWER ON
The “AUTO POWER ON”( ) is for high level (speaker-level) connections. When the ON/OFF
switch is in the “ ” position, the subwoofer will automatically turn on when there is signal ON
input. If the amplier detects no signal input, the amplier will automatically power off. If
you prefer to use the remote turn on/off connection, leave the switch in the “ ” position.OFF
D. LOW PASS FILTER
This control permits you to dene the frequency range you want the subwoofer amplier
to receive. The subwoofer will reproduce all sound BELOW the frequency you set.
E. BASS BOOST
The bass boost feature will increase the sound level in the bass frequencies.
F. INPUT GAIN CONTROL
After you have installed your system, turn this control to minimum. Turn the head unit on
(and the subwoofer will turn on via the remote connection). Turn the head unit volume to
about 2/3 full level. Slowly turn up the subwoofer input gain control until you hear a small
amount of distortion. Then reduce the level until the distortion is completely gone. Level
the control at this setting.
Note: Please connect the remote terminal to the remote output of head unit as Fig.5
when you hear the unit turn ON/OFF POP noise from the subwoofer.
Note: The low pass lter frequency can be higher or lower than the standard. There is
+/-20% tolerance.


Product specificaties

Merk: Phoenix Gold
Categorie: Subwoofer
Model: ZR10P

Heb je hulp nodig?

Als je hulp nodig hebt met Phoenix Gold ZR10P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Phoenix Gold

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer