Philips Series 5000 BT5502 Handleiding

Philips Baardtrimmer Series 5000 BT5502

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips Series 5000 BT5502 (7 pagina's) in de categorie Baardtrimmer. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

BT5502

4222.002.9106.1 (22/8/2018)

0.4mm

10.4

20.0

0.4

10.0

>75% recycled paper

>75% papier recyclé

English

General description (Fig. 1)

1 Cutting unit

2 Length setting zoom wheel

3 On/off button

4 Battery charge indicator

5 Supply unit

6 Small plug

7 Cleaning brush

8 Pouch

9 Long beard comb

10 Short beard comb

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry (Fig. 2).

Warning

- To charge the battery, only use the detachable

supply unit (HQ8505) provided with the

appliance.

- The supply unit contains a transformer. Do not

cut off the supply unit to replace it with another

plug, as this causes a hazardous situation.

- Children shall not play with the appliance.

Cleaning and user maintenance shall not be

made by children without supervision.

- Always unplug the appliance before you clean it

under the tap.

- Always check the appliance before you use it.

Do not use the appliance if it is damaged, as

this may cause injury. Always replace a

damaged part with one of the original type.

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the charging stand in water and

do not rinse it under the tap (Fig. 2).

- Never immerse the appliance in water. Do not

use the appliance in the bath or shower.

- Never use water hotter than 60°C to rinse the

appliance.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener to

prevent irreparable damage to the supply unit.

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the

appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- This appliance can be safely cleaned under the

tap (Fig. 3).

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Charging

Battery status indicator

- When the battery is almost empty, the battery

charge indicator flashes orange.

- When the appliance is charging, the battery

charge indicator flashes green.

- When the appliance is fully charged, the battery

charge indicator lights up green continuously.

Note: After approx. 30 minutes, the light goes out

automatically.

Before first usage charge the appliance for 2 hours

without interruptions and until the battery charging

indication shows that the battery is full. This is

0.4-10mm 10.4-20mm

needed to make maximum use of the battery

capacity. All next charges will take 1 hour.

It takes approximately 1 hour to fully charge the

appliance. When it is fully charged, the appliance

has a cordless operating time of up to 90 minutes.

1 Make sure the appliance is switched off.

2 Insert the small plug into the appliance and put

the supply unit in the wall socket (Fig. 4).

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Using the appliance

- Note: This appliance can be used without cord

or when it is connected to the wall socket (Fig.

5).

Switching the appliance on and off

- Press the on/off button once to switch the

appliance on or off (Fig. 6).

Beard trimming

Trimming with comb

Note: When you trim for the first time, start at a

length setting that is longer than what you are

used to, to familiarize yourself with the

appliance.

- The appliance comes with two combs: a long

beard comb and a short beard comb.

- Use the trimming comb attached to the cutting

element to trim your beard and moustache in

your preferred style. Turn the zoom wheel to

choose from 20 length settings ranging from

10.4mm to 20mm (Fig. 8) (for the long beard

comb) and 0.4mm to 10mm (Fig. 9) (for the

short beard comb). The length settings are

mentioned at the back of the combs.

1 Make sure the appliance is switched off.

2 Slide the comb into the guiding grooves on

both sides of the appliance ('click’) (Fig. 7).

3 Turn the zoom wheel to select the desired

length setting (Fig. 8). The selected length

setting is shown on the front of the appliance.

The blue color refers to length settings ranging

from 10.4mm to 20mm (Fig. 12) and the silver

refers to length settings ranging from 0.4 to

10mm (Fig. 11).

4 Switch the appliance on (Fig. 10).

5 To trim most effectively, move the appliance

against the hair growth direction. Make sure

that the surface of the comb always stays in

contact with the skin (Fig. 13).

Since all hairs do not grow in the same

direction, you may want to try different

trimming positions (i.e. upwards, downwards, or

across). Practice is best for optimum results.

6 If a lot of hair has accumulated in the comb,

remove it from the appliance and blow and/or

shake out the hairs. Regularly remove cut hair

from the comb. The selected hair length setting

does not change when the comb is removed.

7 Switch off and clean the appliance and

attachments after each use.

Trimming without comb

If you trim without the comb, your hair is cut off

close to the skin (0.4mm). You can use the

trimming head without the comb to:

- Define hair line

- Trim nape of neck

- Remove single unwanted hairs

1 Make sure the product is switched off.

2 Pull the comb off the product (Fig. 14).

-Never pull at the flexible top of the comb.

Always pull at the sides.

3 Turn on the product.

4 Make well-controlled movements. Touch the

hair lightly with the trimmer.

-For a comfortable trim close to your skin,

place the flat side of the trimming head

against your skin and make strokes in the

desired direction (Fig. 15).

-For contouring, hold the trimming head

perpendicular to the skin and move the

trimming head upwards or downwards with

gentle pressure.

5 Turn off and clean the product after each use

(see 'Cleaning').

Cleaning

Never use scouring pads, abrasive cleaning agents

or aggressive liquids such as petrol or acetone to

clean the appliance.

Clean the appliance after each use.

1 Switch off the appliance and disconnect it from

the wall socket.

2 Wipe the housing of the appliance with a dry

cloth.

3 Remove the comb (Fig. 14) and clean it with the

cleaning brush and/or rinse it under the tap

(Fig. 16).

4 Clean the cutting unit with the cleaning brush

and/or rinse it under the tap (Fig. 19Fig. 17).

5 Carefully shake off excess water and let the

appliance air dry completely.

Never dry the trimmer teeth with a towel or

tissue, as this may damage the trimmer teeth.

6 After cleaning, reattach the comb (Fig. 7) to the

appliance.

Every 3 months: cleaning trimming head

connector

1 Turn off the product and disconnect it from the

wall outlet.

2 Remove the comb (Fig. 14).

3 Pull the cutting unit off the appliance (Fig. 18).

4 Clean the trimming head connector and hair

chamber with the cleaning brush and/or rinse

them under the tap (Fig. 20).

5 Clean the inside of the trimming head with the

cleaning brush and/or rinse it under the tap

(Fig. 19).

6 Carefully shake off excess water and let all parts

dry completely.

Product specificaties

Merk:	Philips
Categorie:	Baardtrimmer
Model:	Series 5000 BT5502
Soort bediening:	Buttons, Rotary
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Makkelijk schoon te maken:	Ja
Stroombron:	AC/Baterry
Oplaadtijd:	1 uur
Zoomcapaciteit:	Ja
Snel opladen:	Ja
Waterdicht:	Ja
Opbergetui:	Ja
Materiaal mes:	Roestvrijstaal
Gebruikstijd:	90 min
Wasbaar:	Ja
Minimale haarlengte:	0.4 mm
Maximale haarlengte:	20 mm
Oplaadbaar:	Ja
Aantal kammen:	2
Trimstijlen:	Lange baard
Draadloos:	Ja
Batterij-oplaadindicatie:	Ja
Aantal lengte stappen:	40
Instelnauwkeurigheid:	0.2 mm
Stroomindicatielampje:	Ja
Onderhoudsvrij - geen olie nodig:	Ja
Verbinding kammen:	Baard
Zelfslijpend mes:	Ja
Snelle oplaadtijd:	5 min
AC-ingangsspanning:	100 - 240 V
Batterijtechnologie:	Nikkel-Metaalhydride (NiMH)
Type batterij:	Ingebouwde accu
Oplaadbare batterij:	Ja