Petsafe 62350 Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Petsafe 62350 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
131203
Pet Safety Seatโ„ข
Care & Use Guide
Thank you for purchasing the Solvit Pet Safety Seat. Check to make sure the contents include a fabric cover with
tether in polybag; a three-panel plastic main Seat section; and the following plastic sections: Front Strut; Rear Strut;
Right Wall; and Left Wall (name embossed on the side of each).
Assembly: (Make sure the smooth side of each plastic panel faces โ€œinโ€ and the side with round depressions faces
โ€œoutโ€). Insert tab A on Front Strut into slot A in Left Wall and slide Front Strut in the direction of the arrow until tab
A is in the fully locked position.
Repeat this procedure to lock tab B on Front Strut into slot B on Right Wall, and to lock tabs C and D on Rear Strut
into slots C and D on the Left and Right Wall sections.
The main Seat section is a three-panel piece that was
folded in a โ€œZโ€ shape in the package. Before
connecting to the Left and Right Wall sections, fold
the Seat section into a โ€œUโ€ shape with the smooth
sides facing โ€œinโ€. Insert double-tab E on the front
panel of the Seat section into slot E on the Left Wall
and slide to lock. Repeat for tab G then repeat for
tabs F and H into the corresponding slots on the
Right Wall.
Place the assembled plastic frame upside-down on a clean surface. The
Outer Fabric Shell has a zipper and small tags marked Z (next to zipper)
and X (on opposite seam). With zipper in the fully open position, slide the
fabric shell over the plastic frame so the Z seam aligns with the H corner at
the back of the plastic frame and the X seam aligns with the G corner.
SOLVIT Products, LP ๎šŒ1114 W Harris Rd, Suite 101 ๎šŒ Arlington, TX 76001
Tel: 866-6-SOLVIT (866-676-5848) ๎šŒ Fax: (817) 466-2291
Email: customerservice@solvitproducts.com www.solvitproducts.com ๎šŒ
Pull the sides of the fabric shell down all four sides of the plastic frame
until the rectangular bottom panel of the fabric shell aligns with the
rectangular bottom of the plastic frame.
Turn the entire assembly right-side-up and pull the fabric shell up and
over the top edges of the plastic seat, and close the zipper. The seat
should now look like the image below and the two seat belt slits in the
fabric shell should align with the holes in the plastic frame.
The underside of the Top Fabric Liner includes two small
tags marked X and Z. Insert the top liner into the seat
portion of the plastic frame so the X and Z seams on the
inner liner align with the X and Z seams on the fabric outer
shell. Fit the upper edge of the fabric liner over the rear
wall of the plastic frame and fasten the loop tape pieces on
the top liner with the hook tape pieces on the outer shell.
Pass the large loop end of the safety tether (opposite the
carabineer), through the slit sewn into the lower edge of
the back panel of the top liner and through the slit in the
plastic Seat section. Fit the upper edges of the other
three sides of the top liner over the edges of the plastic
frame and fasten the hook and loop tape strips for each
side. Finally, insert the reversible pillow.
To install in vehicle, place the Safety Seat on the vehicle
seat and pass the seat belt through the holes in the fabric and plastic frame on one side of the Safety Seat. Thread the
seat belt through the large loop on the end of the safety tether, all the way through the frame and out the holes on the
opposite side, then buckle. Tug the safety tether firmly to make sure it is attached to the seat belt and adjust to desired
length. Place pet in the Safety Seat, attach the tether, and itโ€™s ready to go! For multiple pets, extra tethers are
available โ€“ contact Solvit customer service at the number below.
Safety: We recommend using a harness, rather than a collar, when traveling. The safety tether can be attached to any
harness, but for maximum safety, we recommend the Solvit Deluxe Vehicle Safety Harness, sold separately.
Cleaning: Fabric pieces can be machine washed in cold - machine dry without heat or line dry.
Limited Lifetime Warranty: The Pet Safety Seat is warranted to be free from defects in materials or workmanship for
the life of the product. Some restrictions apply, so please visit our website for more details. A copy of the original
sales receipt is required for warranty issues.
Solvit Products is dedicated to offering innovative solutions to improve petsโ€™ quality of life. Please feel free to
contact us with and questions, comments, or warranty issues. Thank you for your purchase!


Product specificaties

Merk: Petsafe
Categorie: Niet gecategoriseerd
Model: 62350

Heb je hulp nodig?

Als je hulp nodig hebt met Petsafe 62350 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Petsafe

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd