Penton SENTRY6RT/EN Handleiding

Penton Speaker SENTRY6RT/EN

Lees hieronder de 📖 handleiding in het Nederlandse voor Penton SENTRY6RT/EN (1 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

RoHS

Penton UK Ltd

Unit 2 Teville Industrials Dominion Way Worthing West Sussex | | | | BN14 8NW

T: +44 (0)1903 215315 F: +44(0)1903 215415 E: sales@ pentonuk.co.uk | |

www.pentonuk.co.uk

1. LOUDSPEAKER ENCLOSURE

2. REFERENCE AXIS

3. REFERENCE PLANE

4. HORIZONTAL PLANE

VANDALPROOF METAL

CABINET LOUDSPEAKERS

f SENTRY6RT/EN

f SENTRY6RT/ENC

EN54-24

INSTALLATION INSTRUCTIONS

EN54-24:2008

Certificate No: 0359-CPD-0163 TYPE A

f SENTRY6RT/EN

f SENTRY6RT/ENC

* with capacitor

ZCL0504-080

OCTOBER 2012

COMMON

0.25W

0.75W

1.5W

2. The back box has the

option of glanding cable directly

into any of the 3 x 20mm

knockouts or through the rear of

the cabinet.

3. Secure the back box to a

flat surface using the fixing holes

provided. (Fixings are not

included). Do not forget to fit the

rubber "O" ring between the wall

and back box before fixing to the

wall. This will ensure that the

screw fixings and any rear cable

entry will be sealed from water

ingress.

1. Decide on the back box

orientation. Normally the back

box is installed with the 2 x

20mm knockouts facing

upwards. However the back

box can be installed in any

orientation as well as

horizontally on a ceiling if

required.

4. Once the back box has

been fixed securely to the

surface the installation

cable can be fitted as

required. The cable can then

be terminated into the

terminal block fitted to the

back box. The terminals are

suitable to take "loop in"

"loop out" connections up to

2.5mm per core.

5. Take the speaker plate

and connect the 3

pre-installed wires from the

terminal block on the back

box to the spade terminals

provided on the speaker

transformer.

6. Slot the speaker plate on

to the retaining lug ‘A’ and then

push the speaker into the back

box. Tighten the grub screw ‘B’

until it firmly holds the speaker

plate. Be careful not to over

tighten the grub screw.

GLAND Hole X1

GLAND Hole X2

O Ring

Product specificaties

Merk:	Penton
Categorie:	Speaker
Model:	SENTRY6RT/EN
Kleur van het product:	Wit
Gewicht:	1500 g
Breedte:	- mm
Diepte:	- mm
Hoogte:	75 mm
Connectiviteitstechnologie:	Bedraad
Diameter:	194 mm
Gemiddeld vermogen:	6 W
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Ceiling-mountable, Wall-mountable
Aantal drivers:	1
Frequentiebereik:	250 - 18000 Hz
Versterker:	Nee
AC-ingangsspanning:	100 V
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Transformatortrappen:	1.5, 3,6 W
Ingebouwde bijpassende transformator:	Ja