Pelco Sarix Professional IMP1110-1S Handleiding

Pelco Bewakingscamera Sarix Professional IMP1110-1S

Lees hieronder de 📖 handleiding in het Nederlandse voor Pelco Sarix Professional IMP1110-1S (66 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/66

C3955M-B-EN (5/15)

Sarix® IMP Series

Indoor Mini Domes

User Manual

Contents

Important Notices ......................................................................................................................................................................... 5

Regulatory Notices 5..............................................................................................................................................................

Radio and Television Interference ....................................................................................................................................... 5

Legal Notice ......................................................................................................................................................................... 5

Video Quality Caution .......................................................................................................................................................... 6

Frame Rate Notice Regarding User Selected Options 6........................................................................................................

Open Source Software ........................................................................................................................................................ 6

KCC Certification ................................................................................................................................................................. 7

Korean Class A EMC .................................................................................................................................................. 7

ESD Warning ....................................................................................................................................................................... 7

Network Topology Statement ....................................................................................................................................................... 7

Legal Notice (Audio Notice) .......................................................................................................................................................... 7

Preface ......................................................................................................................................................................................... 8

1. Product Overview .............................................................................................................................................................. 9

1.1 Dimensions .................................................................................................................................................................... 9

1.2 Physical Characteristics ............................................................................................................................................... 10

2. Installation and Connection ........................................................................................................................................ 11

2.1 Unpacking Everything .................................................................................................................................................. 11

2.2 Optional Accessories ................................................................................................................................................... 11

2.3 Installation .................................................................................................................................................................... 11

2.3.1 Checking Appearance ...................................................................................................................................... 11

2.3 .2 Disassembling the Camera .............................................................................................................................. 11

2.3.3 Connecting the Wires ....................................................................................................................................... 12

2. Installing3.4 the Camera........................................................................................................................................ 12

2.3.5 Positioning the Camera .................................................................................................................................... 16

2.3.6 Adjusting the Focus .......................................................................................................................................... 16

2.3.7 Network Topology ............................................................................................................................................ 17

2.3.8 System Requirements ...................................................................................................................................... 18

2. Connection4 ................................................................................................................................................................... 19

2.4 .1 Default IP Address ...........................................................................................................................................19

2.4.2 Connecting from a Computer & Viewing Preparation ....................................................................................... 19

3. Administration and Configuration .............................................................................................................................. 20

3.1 Live .............................................................................................................................................................................. 20

3.1.1 Zoom and Focus Controls ................................................................................................................................ 21

3.2 Settings ........................................................................................................................................................................ 21

3.2.1 System ............................................................................................................................................................. 22

3.2.2 Network ............................................................................................................................................................ 25

3.2.3 Imaging............................................................................................................................................................. 36

3.2.4 A/V Streams ..................................................................................................................................................... 41

3.2.5 Users ................................................................................................................................................................ 46

3.2.6 Events .............................................................................................................................................................. 50

Technical Specifications ............................................................................................................................................................. 60

Pelco Troubleshooting Contact Information ............................................................................................................................... 64

Important Notices

REGULATORY NOTICES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority

to operate this equipment under Federal Communications Commission’s rules.

In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with

non-approved equipment or unshielded cables is likely to result in interference to radio and television reception.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB 003 du Canada.-

LEGAL NOTICE

SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING

CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES.

APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND MAY

REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS. YOU ARE SOLELY

RESPONSIBLE FOR INSURING STRICT COMPLIANCE WITH SUCH LAWS AND FOR STRICT ADHERENCE TO ANY/ALL

RIGHTS OF PRIVACY AND PERSONALTY. USE OF THIS EQUIPMENT AND/OR SOFTWARE FOR ILLEGAL

SURVEILLANCE OR MONITORING SHALL BE DEEMED UNAUTHORIZED USE IN VIOLATION OF THE END USER

SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE TERMINATION OF YOUR LICENSE RIGHTS

THEREUNDER.

VIDEO QUALITY CAUTION

FRAME RATE NOTICE REGARDING USER SELECTED OPTIONS

Pelco systems are capable of providing high quality video for both live viewing and playback. However, the systems can be

used in lower quality modes, which can degrade picture quality, to allow for a slower rate of data transfer and to reduce the

amount of video data stored. The picture quality can be degraded by either lowering the resolution, reducing the picture rate,

or both. A picture degraded by having a reduced resolution may result in an image that is less clear or even indiscernible. A

picture degraded by reducing the picture rate has fewer frames per second, which can result in images that appear to jump or

move more quickly than normal during playback. Lower frame rates may result in a key event not being recorded by the

system.

Judgment as to the suitability of the products for users' purposes is solely the users' responsibility. Users shall determine the

suitability of the products for their own intended application, picture rate and picture quality. In the event users intend to use

the video for evidentiary purposes in a judicial proceeding or otherwise, users should consult with their attorney regarding any

particular requirements for such use.

OPEN SOURCE SOFTWARE

This product includes certain open source or other software originated from third parties that is subject to the GNU General

Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different and/or additional copyright licenses,

disclaimers, and notices.

The exact terms of GPL, LGPL, and some other licenses are provided to you with this product. Please refer to the exact terms

of the GPL and LGPL at http://www.fsf.org (Free Software Foundation) or http://www.opensource.org (Open Source Initiative)

regarding your rights under said license. You may obtain a complete corresponding machine-readable copy of the source code

of such software under the GPL or LGPL by sending your request to digitalsupport@pelco.com; the subject line should read

Source Code Request. You will then receive an email with a link for you to download the source code.

This offer is valid for a period of three (3) years from the date of the distribution of this product by Pelco.

KCC CERTIFICATION

K C A EMC orean lass

ESD WARNING

WARNING: This product is sensitive to Electrostatic Discharge (ESD). To avoid ESD damage to this product,

use ESD safe practices during installation. Before touching, adjusting or handling this product, correctly attach

an ESD wrist strap to your wrist and appropriately discharge your body and tools. For more information about

ESD control and safe handling practices of electronics, please refer to ANSI/ESD S20.20 -1999 or contact the

Electrostatic Discharge Association (www.esda.org).

Network Topology Statement

IMPORTANT NOTE. PLEASE READ. The network implementation is shown as a general representation only and is not

intended to show a detailed network to ology. Your actual network will differ, requiring changes or perhaps additional network p

equipment to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific

requirements.

Legal Notice (Audio Notice)

NOTE: Improper use of audio/visual recording equipment may subject you to civil and criminal penalties. Applicable laws

regarding the use of such capabilities vary between jurisdictions and may require, among other things, express written consent

from the recorded subjects. You are solely responsible for insuring strict compliance with such laws and for strict adherence to

any/all right of privacy and personality.

WARRANTY STATEMENT

For information about Pelco's product warranty and thereto related information, refer to

www.pelco.com/warranty.

Preface

This user manual is as a reference for thto be used e installation and manipulation of the camera including features, functions,

and a detailed explanation of the menu tree.

This manual provides the reader with the following information:

 Product Overview: the main functions and system requirements of the unit.

 Installation and Connection: instructions on unit installation and wire connections.

 Administration and Configuration: the main menu navigation and controls explanations.

1. Product Overview

1.1 Dimensions

The Sarix Series IMP Indoor Mini Dome has threecamera installation methods (refer to 3.2. 4 Installing the Camera on page

12). -Figure 1 1 depicts the dimensions of the environmental mini dome as well as the dimensions of three back box

configurations (pendant mount, ceiling mount, surface mount).

V PALUES IN ARENTHESES IN ALL H ARE CHES; OT ERS ARE

CENTIMETERS.

I D I D I PNDOOR OME NDOOR OME IN NDOOR ENDANT MOUNT

INDOOR NDOOR NDOOR NDOOR URFACE OUNTD IOME IN CEILING MOUNT I D IOME IN S M

F 1-1: P IGURE HYSICAL DIMENSIONS

1.2 Physical Characteristics

①

④

⑤

⑥

F 1-2: C C F IGURE AMERA ONNECTIONS AND EATURES 1/2

④

⑦

⑧

⑨

FIGURE 1-3: C AMERA EATURES CONNECTIONS AND F 2/2

1. Connect Network Cable: the network cable, pass the cable through the cable hole and fix it to the cable slot as the figure

shows.

2. 24 VAC Power: Supports 24 VAC as the power source.

3. Digital I/O Connectors

A. Alarm Out: Using the “ ” “OUT and COM” cports, onnect to an external device to be triggered through alarm output

signals.

B. Alarm In: “ ” Using the IN and “ ” (ground) ports, that connect to an external device can trigger alarm input signals.

C. Audio In: “+” “-“ Using the and ports, connect to an external device a microphone like that receives sound for the

camera.

4. RJ-45 Network Port: Connects the camera to the IP network. Also supplies power to the camera through the network

using PoE. If PoE is not available, the camera is prewired for 24 VAC.

5. Dome Liner

6. Lens

7. Default: Using a small tool, such as a paper clip, hold down the reset button longer than 5 seconds to reset the camera to

factory . defaults

8. M -SD :icro Card To record images when events happen.

9. Reset: Using a small tool, such as a paper clip, press briefly the reset button and release to restart the camera.

2. Installation and Connection

2.1 Unpacking Everything

Check all items in the product box against the order form and packing slip. n addition to this items below are the I manual, the

included in the product x: bo

 One indoor m d c ini ome amera

 rOne esource CD

 One printed q iuick nstallation g uide

 tOne erminal header 2P

 tOne erminal header 8P

 wOne rench pin T orx

Please contact your dealer if any items are missing.

2.2 Optional Accessories

 IMPBB-S: Sarix Indoor Surface Mount for Mini Dome White

 IMPBB-P: Sarix Indoor Pendant Mount for Mini Dome White

 IMPBB-I: Sarix Indoor In Ceiling Mount for Mini Dome-

2.3 Installation

Following tools might help you complete the installation:

 a drill

 screwdrivers

 wire cutters

2.2.3

33.1 Ch

.1 Ch

.1 Ch.1 Chec

ececk

kki

iin

nng

ApApp

ppear

ear

earearan

ananc

cce

Although the protective materials used for the packaging should be able to protect the unit from most accidents during

transportation, check the unit and its accessories for any visible damage.

Remove the protective film to check items in accordance with the list in

2.1 Unpacking Everything

2.2.3.2

3.2

3.2 3.2 Di

DiDis

ssas

asass

ssem

ememb

bbl

lli

iin

nng

gg t

t th

hhe Cam

e Cam

e Came Camer

erera

Before you mount and adjust the camera, push and remove the dome cover ( with caution.#2)

①

②

F 2-1: D C IGURE ISASSEMBLING THE AMERA

① Camera Body

② Dome Cover

2.2.3.3

3.3

3.3 3.3 C

CConne

onne

onneonnecting

cting

cting cting the

the

thethe W

W Wir

irires

eses

This unit supports one of the following options as power supply.

•

•• 24 VAC: Connect 24V (~ ~ VAC ) cables to terminals 24

•

•• PoE: Connect the RJ-45 network connector to a PoE compatible network device that owerhas supplied p through the

Ethernet cable.

•

•• (Optional) Insert a udio cable and alarm cable to the unit, and connect the network cable to the RJ-45 etwork n port of

a switch. Refer to Network Cable in 1.2 Physical Characteristics to manage the cables.

NOTE: To avoid the length deficiency, you should reserve about 10mm length of the network cable for connecting the

cable to the RJ-45 etwork n port before attaching the cable to the cable slot.

FIGURE ONNECTING2-2: C THE NETWORK CABLE

Caution

To avoid damage to the never connect more than one type of power supply (PoE IEEE802.3 unit,

Ethernet Class power plug) at the same time. 2 or AC 24V

2.2.3.4

3.4

3.4 3.4 I

IInsta

nsta

nstanstalling

lling

llinglling

tth

hhe Cam

e Cam

e Came Camer

erera

You can install the Series dome camera using one of the following installation methods:Sarix

 Surface Mount (refer to 2.3.4.1 Surface Installation).

 P M endant ount (refer to 2.3 P.4.2 endant Installation).

 In-C Meiling ount (refer to 2. .4.3 3 In-Ceiling Installation).

2. .1 3.4 Surface Installation

Surface Installation involves mounting the camera to the wall with the IMPBB-S, Sarix Indoor Surface Mount for Mini

Dome White.

1. Pass all cables through the back box cable hole and attach the camera body (#2) to the back box (#1).

2. Attach the guide pattern (supplied with mount is used for surface) that mount to the wall or ceiling.

T1: Doubl e gang

T2: Si l e gangng

T3: Pel co I M- VE Mount

T4: 4” Square b ox

T5: Pel co I M Mount

145mm ( 5. 7" )

I e rnn 3. 3( 0. i nch) H ol es125

( M4 o r TYPE S EW#6 CR )

Out e r 6 ( 0. i nch ) H ol es25

( FOR PLASTI C CAN HOR )

FIGURE 2-3: A TTACHING UIDE ATTERN THE G P

3. According to the guide pattern (#1) a , d rill bottom conduit hole or side hole and pull the wires through the holeconduit .

4. Attach the mount plate of surface mount back plate to the mounting surface with proper screws (#2) .

5. Secure the back box (#3) to the mounting surface with three captive screws.

6. Position the camera as needed (refer to 2.3.5 Positioning the Camera).

7. Focus the lens (refer to 2.3.6 Adjusting the Focus).

8. Install the dome cover 5(# ) and complete the installation.

①

②

③

④

⑤

F 2-4: S I IGURE URFACE NSTALLATION

① Guide Pattern

② Mount Plate

③ Back Box

④ Camera Body

⑤ Dome Cover

2.3.4.2 Pendant Installation

The mountingPendant Installation involves the camera to the wall with the IMPBB-P, Sarix Indoor Pendant Mount for Mini

Dome White. To attach the camera into the back box, it must be installed with a 3/4 rain” -tight compression gland and a lock

nut (both supplied) are not as shown in Figure 2-5.

①

②

FIGURE TIGHT2-5: R AIN- & L OCK UTN

Refer to Figure 2-6 for pendant installation.

1. Pass all cables through the pendant pipe cable hole. (Use mounting screws appropriate to your installation.)

2. Screw the rain-tight compression gland onto the pipe until tight. Slide the back box (#1) onto the pipe until it rests on the

underside of the rain-tight compression gland.

3. Screw the lock nut onto the pipe protruding from beneath the back Tighten until the back box is held firmly in place.box.

4. Mount the camera body (#2) to the back box (#1).

5. Use screws to attach the back box to the mounting surface.

6. Position the camera as needed (refer to 2.3.5 ositioningP the Camera).

7. Focus the lens (refer to 2.3.6 Adjusting the Focus).

8. Install the dome cover (#3) and complete the installation.

①

②

③

F 2-6: PIGURE ENDANT INSTALLATION

①

Back Box

② Camera Body

③ Dome Cover

① Rain-tight Compression

gland

② Lock Nut

2.3.4.3 - In Ceiling Installation

The In Ceiling- Installation involves mounting the camera into the ceiling with the IMPBB-I, Sarix Indoor In-Ceiling Mount

for Mini Dome.

1. Attach the guide pattern (supplied with mount used for ) in-ceiling mount to the wall or ceiling.

mm ( 5. 3" )134

( Backbox)

mm ( 5. 7")145

F 2-7: A G PIGURE TTACHING THE UIDE ATTERN

2. According the guide pattern, cut a hole in the ceiling/wall.

3. Insert the back box (#1) into the hole and screw the two screws with a screwdriver so the antidropping claspers (#4) can

slide out to secure the back box into the ceiling (refer to Figure Figure 2-8 & 2-9).

①

F 2-8: I B BIGURE NSERTING THE ACK OX

④

FIGURE OX2-9: S ECURING THE BACK B

4. Pass all cables through the back box cable hole and attach the camera body (#2) to the back box (#1).

5. Position the camera as needed (refer to 2.3.5 Positioning the Camera).

6. Focus the lens (refer to 2.3.6 Adjusting the Focus).

7. Install the dome cover (#3) and complete the installation.

①

②

③

F 2- : I -C IIGURE 10 N EILING NSTALLATION

2.3

2.32.3.

..5

55 P

P Positioni

ositioni

ositioniositioning the

ng the

ng theng the C

C Ca

aame

memera

rara

1. R etract the dome liner.

2. View the camera image using the browser (refer to 2.4 Connection).

3. Use a small Phillips screwdriver to loosen the screw (#5) . for tilt adjustment

4. Manually rotate and tilt the camera module to position the camera. Do not over-rotate the module.

WARNING: Excessively turning the module in one direction could result in damage to the wiring.

①

②

③

④

⑤

F 2-12: P C IGURE OSITIONING THE AMERA

2.3

2.32.3.

..6

66 Adjusting the

Adjusting the

Adjusting the Adjusting the F

F Foc

ococus

usus

1. View the camera image using the browser (refer to 2.4 Connection).

2. e Us the settings in the Web interface (refer to 3.2.3.3 Focus) to adjust the zoom and focus of the lens to the desired field

of view.

3. Also the focus can be adjusted by moving the zoom slider using the Focus optionsand in the live webpage.

NOTE: Focus adjustment is done exclusively with Web UI.

① Back Box

② Camera Body

③ Dome Cover

① Pan = 355°

② ° Rotate = 360

③ Tilt = 90°

④ = Dome liner 90°

2.3

2.32.3.7

.7 .7 N

NNe

eetwork T

twork T

twork Ttwork Topology

opology

opologyopology

The camera can deliver video images and audio in real time using the Internet and Intranet. It's equipped with Ethernet RJ-45

network interface.

F 2-13: N TIGURE ETWORK OPOLOGY TYPE Ⅰ

Ⅰ

ⅠⅠ

F 2-14: N TIGURE ETWORK OPOLOGY TYPE Ⅱ

Ⅱ

ⅡⅡ

2.3

2.32.3.8

.8 .8 Sy

SySys

sst

ttem

emem Req

Req

Req Requ

uui

iir

rrem

ememen

enent

tts

The table below lists the minimum requirement to implement and operate a unit. Network and processor bandwidth limitations s

might cause the video stream to pause or appear pixilated when additional Web-interface users connect to the camera.

Decrease the images per second (ips), resolution, compression, or bit rate settings of the Web interface video streams to

compensate for network/processor limitations.

TABLE 2- S1: YSTEM REQUIREMENTS

System Hardware

CPU Intel® Pentium® 4 microprocessor, 2.4GHz or equivalent

RAM 1 GB or above

Monitor Minimum of 1024 x 768 resolution, 16 or 32- -bit pixel color resolution

System Software

Operating System Microsoft® Windows® XP, Vista 32 and 64 bit, Win7 32 and 64 bit

Browser Internet Explorer® 9.0 and later, Apple

® Safari® 7.0.6, Mozilla® Firefox® 31.0, Google®

Chrome™ 37.0.2062.124 m

M Pedia layer Pelco Media Player or QuickTime® 7.6.5 for Windows XP, Windows Vista, and Windows 7; or

QuickTime 7.6.4 for Mac OS X 10.4 (or later)

Unit

Power Supply 24V / PoE AC

Note

1. All the installation and operations should comply with your local electricity safety rules.

2. Pelco Media Player is recommended for control, smoothness, and reduced latency as compared to

QuickTime. The PMP is downloadable from Pelco web site: www.pelco.com/mediaplayer.

3. This product is not compatible with QuickTime version 7.6.4 for Windows XP or Windows Vista. If

you have this version installed on your PC, you will need to upgrade to QuickTime version 7.6.5.

4. Network and processor bandwidth limitations might cause the video stream to pause or appear

pixelated when additional Web interface users connect to the camera. Decrease the images per -

second (ips), resolution, compression, or bit rate settings of the Web interface video streams to

compensate for network or processor limitations.

2.4 Connection

2.2.4

44.1 Def

.1 Def

.1 Def.1 Defau

auaul

llt

tt IP

IP IP Addre

Addre

AddreAddress

ssss

The ’unit s default IP address is 192.168.0. 0 2 and sub mask is 255.255.255.0. When setting default IP address of 192.168.0.20

the camera will check to see if that address is already in use and will bump the last octet of the address by 1 if it is. The bump

last octet of IP Address by 1 will continue until an unused IP address is found.

However, if you have a DHCP server in your network, the unit would obtain an IP address automatically from the DHCP server

so that you don’t need to change the camera’s IP address The factory default is DHCP . On and 192.168.0.20 assignment only

occurs when camera is set for DHCP but a DHCP server does not respond to request for an IP address.

2.4 .2 Connecting from a Computer & Viewing Preparation

2.4.2.1 Using S Pelco Device Utility oftware to Get Camera’ s IP Address

Pelco Device Utility software is a y program manage and configure the camera utilit that helps users to . Use the utility to find

the IP address since default option is to obtain an IP address via DHCP and therefore the IP address will NOT be known. the

Steps to get the utility program running are listed below.

1. F h inis installing the Device Utility to the computer according to the installation instructions.

2. Log in to the Device Utility by entering the camera s User name and Password. In the window, enter the default user ’

name: admin and passw , thenord: admin click Enter DU2 button to log in.

3. In the Manage Devices page, you can click Refresh Device List or Add New Device to search for the devices.

4. From the Device can get series information about camera, IP Address included.List, you

For more information about using the Device Utility, click this green icon " " on the upper the -right corner of Device Utility

page.

2.4.2.2 C Connecting from a omputer

1. Check the networking available between the and unit and the computer a co. Ping the default IP address. Start mm

prompt (Windows: from the Start Menu,select Program. and Prompt.), and tSelect Accessories and choose Comm ype

“Ping 192.168.0. 0”. If the message “Reply from…” appears, it means the connection is 2 available.

2. Start Internet Explorer and enter IP address: 192.168.0.20. A login window In the window, enter the should pop up.

default user name: admin and password: admin to log in.

NOTE: If you do not know the camera’s IP address, you can locate it using the Pelco Device Utility (software refer to 2.4.2.1

Using Pelco Device Utility Software to Get Camera’s IP Address).

Further administration on the unit can be found in “3. Administration and Configuration".

FIGURE OGIN INDOW2-15: L W

3. Administration and Configuration

3.1 L ive

Simply click on Live on the top right side of the browser window while accessing the the IP address of unit, and a live video is

displayed directly in the browser window. When clicked on Settings, a window will pop for configuring up “System”,

“ ” “ ” “Network , Imaging , A/V Streams” “, Users Events” “, and ”. Please refer to on page 3.2 Settings 21 for more information.

The current logged in identity shows to the right Cof the Help. lick on Logout admin of the administration window and

configuration will return to the camera image screen.

* Figures of 3. Administration and Configuration are taken from the 3MP model for web interface introduction purposes.

Options within each item may differ slightly among series products and the differences will be marked in a NOTE.

The following are explanations to the tabs on the Live window.

Select Stream: Selects the viewable video stream that is displayed in live view (primary or secondary) and

selects unicast or multicast settings.

Maximize Viewing Area: Scales the image to the full size of the browser. To resize the video pane to normal

view, click the Show Toolbar button in the upper-right corner of the window.

Open Stream in New Window: Opens the video in a scalable, independent window. Opening the video in a

separate window allows you to view the video while other applications are running. This window can be

minimized, maximized, or closed using the title bar buttons of the active window. The window can also be

resized to your specifications by dragging the lower- right corner of the window.

FIGURE IEW3-1: L IVE V

33.

..1

11.

..1

11 Z

Z Zoom a

oom a

oom aoom and F

nd F

nd Fnd Focus C

ocus C

ocus Cocus Control

ontrol

ontrolontrols

NOTE: The zoom and focus controls, if available on your model, are viewable only after you have logged on to the device.

Zoom In: Click the button or click and drag the slider to zoom the lens in.

Zoom Out: Click the button or click and drag the slider to zoom the lens out.

Quick -Auto Focus: Click the button for the camera to start a q search to find uick

the optimal focal point for the scene.

3.2 Settings

Click on Settings, a window will pop for configuring up “System User”, “Network” “, Imaging”, “ ” “A/V Streams , s”, and

“ ”. Events

F 3-2: S IGURE ETTINGS

3.2.1 System

Use the System tab to change the device name, configure the time settings, set up the text overlay for the live view, get

backup, display system information and update firmware version. You can also use the System tab to generate a system log,

reboot the camera, or to restore the camera's factory default settings.

FIGURE ETTINGS3-3: S YSTEM S

Generate ystem S L og

1. Click the System tab.

2. Click the Gener System Log button to create a system log that can be used by Pelco Product Support for ate

troubleshooting.

Contact Pelco Product Support at 1-800- -289 9100 (USA and Canada) or +1- -559 292-1981 (international).

R eboot Camera

1. Click the System tab.

2. Click the Reboot Camera button to restart the camera. Rebooting the camera does not change the configured

camera settings.

R estore All Camera Defaults

This process cannot be undone; all user and custom settings will be lost.

1. Click the System tab.

2. Click the Restore All Camera Defaults button to restore the camera’s factory default settings.

NOTE: If the camera is not connected to a Dynamic Host Configuration Protocol (DHCP) network, the IP address

settings for the camera will be lost and the server will not recognize the camera. DHCP On is the default setting for the

camera IP address.

3.2.1.1 General Settings

FIGURE ETTINGS3-4: G ENERAL S

Device Name

Change the Device Name by following steps:

1. Click the Device Name box and highlight the text.

2. Type a user friendly name into the - Device Name box (2 to 64 characters). A user friendly name makes it easier to -

recognize the device on ples of user friendly names are Front Door, Lobby, or Parking Lot. the network. Exam -

3. Click Save to save the new device name, or click Reset to restore to the previously saved device name.

Time Settings

If the camera is connected to a Dynamic Host Configuration Protocol (DHCP) network that has time server properties

configured, the camera will synchronize automatically with the time server. If the DHCP network’s time server properties are

not configured or the network does not have a time server, you need to configure the tim e settings manually.

1. Type the IP address of the time server in the Time Server field. The time server is an external server that uses

Network Time Protocol (NTP) to synchronize the camera date and time settings.

2. Select the option. Select the contTime Zone inent and the region that are closest to the camera’s location from the

Time Zone drop menus.- down

NOTE: If your location observes a form of daylight saving time, the system will automatically change the time on

the associated dates.

3. Select the format in which the date and time will appear from the Format drop down field if you have opted Display -

to show the Date/Time Overlay.

4. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

Text Overlay

1. Configure the text overlay settings:

• Background: Set the background the color for text overlay as black or transparent. Text color for the

transparent background can be also customized from the drop down menu when the transparent background -

o ption is selected.

• Content: Four content options can be selected to display from the drop-down menu: Date/Time, Camera

Name, Camera Name + Date/Time, and Custom Text. The blank text field, which is for inputting desired text

by users, shows only when Custom Text option is selected.

NOTE: Multiple content options can display simultaneously.

• Content Position: Four positions can be selected to display content overlays: Top Left, Top Right, Bottom

Left, and Bottom Right. A maximum of three positions can be enabled simultaneously.

2. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.1.2 Backup Restore&

F 3-5: BIGURE ACKUP AND RESTORE SETTINGS

Backup

Once the camera settings have been configured for optimal scene display, use the backup feature to save the camera

settings.

Restore

If the camera settings are changed and inadvertently result in a less desirable image, use the restore setting to restore the

camera to the previously saved settings.

NOTE: This feature is not intended for the configuration of multiple units or for firmware upgrades.

3.2.1.3 System Information

The System Information page fields are read only and include the firmware version, hardware version, model numbe- r, and

serial number of the system as shown in the figure below. This information is typically required by Pelco Product Support for

troubleshooting purposes.

F 3-6: S I IGURE YSTEM NFORMATION

3.2.1.4 Firmware Update

Users can update system firmware if available. All camera motions will shut down during a firmware update. Please close any

other screens before doing a firmware update. Never disconnect power LAN cable during the firmware update process.or

Disconnecting power during a firmware update will cause the update to fail. t takes approximately 3 minutes for the unit to I

reboot af firmware update ter the process.

F 3-7: F U IGURE IRMWARE PDATE

3.2.2 Network

Use the Network tab to change the camera’s general network settings, select the Secure Sockets Layer (SSL) settings, enable

Secure Shell (SSH), configure 802.1x port security settings, choose SNMP Server Firewall mode and enable FTP access to

this camera.

FIGURE ONFIGURATION3-8: N ETWORK C

3.2.2.1 General

Set the General Network Settings for network communication settings.

F 3-9: G N S IGURE ENERAL ETWORK ETTINGS

System Settings

Settings under the System Settings are Hostname, HTTP Port, HTTPS Port, and RTSP Port. Contact your network

administrator before changing port settings to ensure that your port settings do not conflict with your network infrastructure.

 Hostname

1. Click in the Hostname box and highlight the text.

2. Type a user friendly name into the Hostname box (1 to 21 characters) using any combination of alphanumeric -

characters. A user-friendly name makes it easier to recognize the device on the network.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

 HTTP Port

NOTE: The HTTP port number must remain at the default setting (80) when connecting to a Pelco video management

system (VMS) platform. If connecting to a Pelco VMS, do not change the HTTP port setting.

1. Click in the HTTP Port box and highlight the text.

2. Type the new port number in the HTTP Port field. The default port for HTTP communications is 80.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

 HTTPS Port

NOTE: The HTTPS port is not configurable unless you have set SSL Mode to Optional or Required and installed a

security certificate.

1. Click in the HTTPS Port box and highlight the text.

2. Type the new port number in the field. The default port for HTTPS communications is HTTPS Port 443.

3. Click Save. If you have changed the setting in error, you can click reset to revert to the previously saved setting.

 RTSP Port

1. Click in the RTSP Port box and highlight the text.

2. Type the new port number in the field. The default port for RTSP communications is RTSP Port 554.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

IPv4 Settings

Enable or disable the Dynamic Host Configuration Protocol (DHCP) server. DHCP automatically assigns an IP address to

the device if there is a DHCP server on the network.

 tIf DHCP is set to On, he IP address, subnet mask, gateway, and DNS server settings are read-only text.

 If DHCP is set to Off, these settings must be manually changed.

Change the following network settings as required:

1. IP Address: The address of the camera connected to the network.

2. Subnet Mask: The address that determines the IP network that the camera is connected to (relative to its

address).

3. Gateway: The router that accesses other networks.

4. DNS Servers: The addresses of the dedicated servers that translate the names for Web sites and hostnames into

numeric IP addresses.

5. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

Endura Connectivity

In order to connect with the Pelco NVR Endura, please choose which communication method to be adopted for connectivity

from the following 2 options:

 Listen for Endura SM system availability broadcast: In general, Endura broadcasts its SM IP Address to the camera

so that a stable connection can be maintained between Endura system and the camera.

 Associate with specific Endura SM system: Under certain cases, the camera is unable to receive broadcast from

Endura system and therefore is in need of a SM IP Address assigned specifically by user for connectivity.

Configuring IPv6 Settings

The device will accept up to sixteen IPv6 addresses, three IPv6 DNS servers, and three IPv6 gateways.

There are two configuration modes for IPv6 address assignments:

 EAuto: nables automatic configuration using router advertisement. Additional configuration can be provided over

DHCPv6 (if available on your network). Selecting Auto mode still allows you to manually configure additional IPv6

addresses, DNS servers, and gateways.

 Manual Only: Provides a link local IPv6 address for the device and allows you to assign up to 16 static IPv6 addresses -

to the device.

1. Place your mouse pointer over the Network tab.

2. Select General from the drop down menu.-

3. Select On for IPv6.

4. Select a Configuration Mode from the drop down box. Selecting Auto allows the device to configure the remaining -

IPv6 settings automatically, rendering the remaining steps optional.

5. (Optional) Provide static, unicast addresses in the Manual IP Addresses box. Each address requires a prefix, and it

must be input using the format prefix/IPv6Address. Manual IP addresses without prefix information will be rejected.

6. (Optional) Provide the addresses of DNS servers that are not configured automatically in the Manual DNS Servers

b ox.

7. (Optional) Provide the addresses of gateways that are not configured automatically in the Manual Gateways box.

NOTES:

 The device will not accept multicast, localhost, or undefined IPv6 addresses.

 -Link local addresses are not supported for DNS.

 Manually specified DNS servers supersede automatically discovered DNS servers.

 Manually specified DNS servers are not validated by the device; verify any manually specified DNS servers before

saving IPv6 settings.

 Manually specified gateways must be on the same network as the device’s IPv6 addresses. Behavior for a gateway that

is not on the same network as the device’s IPv6 addresses is undefined.

 Some video management systems (VMS), including Pelco VMS systems, do not support connections to cameras and

encoders over IPv6.

3.2.2.2 SSL

To ensure security on the Internet, all Web browsers provide several security levels that can be adjusted for sites that use SSL

technology to transmit data. encrypts communications, making it difficult for unauthorized users to intercept and view user SSL

names and passwords.

SSL requires signed certificates to determine if the Web browser accessing the camera has the required authentication. The

camera can generate a certificate signing request (CSR) that can be sent to a certificate authority for a signature (for example,

VeriSign®), or it can generate a self signed certificate using the - Generate Self-Signed Certificate option.

FIGURE ONFIGURATION3- : SSL C10

SSL Configuration

Select one of the following modes:

 Required: A signed Secure Sockets Layer (SSL) certificate must be installed, and a secure URL that begins with the

protocol name “https:” must be used to access the camera. Sensitive data is always encrypted during transmission. A

URL that begins with the “http:” protocol rather than the “https:” protocol will be redirected to the secure URL

automatically.

NOTE: Beginning with firmware version 1.8.2, this field cannot be modified in the Web browser. To select or clear the

required mode, you must use the ONVIF or Pelco API call. Doing so avoids placing the camera into a mode in which it

would no longer work with a connected VMS system.

 Optional: A signed SSL certificate must be installed, but a secure URL that begins with the protocol name “https:” is

optional when accessing the camera. You can also access the camera using a standard URL with the “http:” protocol, but

sensitive data is not encrypted during transmission. To ensure that sensitive data is encrypted, you must use a secure

URL with the “https:” protocol.

 Disabled (default): Turns off access to the Web client through SSL. Sensitive data will not be encrypted during

transmission.

NOTE: If the SSL mode is set to disabled, you cannot access the camera using a URL that begins with an “https:”

protocol. Your Web browser displays an error message if you do not type the camera URL correctly.

Refer to the following sections for more information:

• Generating Self-Signed Certificate

• Generating Certificate Request

Certificate

 Generating Self- Signed Certificate

1. Click the Install CertificateNew button located at the bottom of the Configuration page. The Select SSL

Certificate Install Method option buttons appear on the page.

FIGURE 3-11: S ELECT ERTIFICATE C INSTALL METHOD OPTION

2. Select the “Generate Self-signed Certificate” option, and then click . The “Next Self-signed Certificate

Information Form” opens.

F 3-12: G S -S C C IGURE ENERATING ELF IGNED ERTIFICATE ONFIGURATION

3. Fill in all of the fields, and then click Generate Certificate . The following progress message appears on the page:

“Loading data…” After a while, the certificate is uploaded to the device.

4. After the certificate is uploaded, select the desired mode.

5. Click Save.

NOTE: Self-signed certificates are valid for one year. The certificate’s expiration date is listed in the Installed Certificate

information section. If the certificate has expired and you attempt to access the camera using a secure URL, the Web

browser displays a message. Repeat this procedure to generate and upload a new certificate.

 Generating Certificate Request

1. Click the Install New Certificate button located at the bottom of the SSL Configuration page. The Select Certificate

Install Method option buttons appear on the page.

2. Select Generate Certificate Request, and then click . The “Next Certificate Request Form” opens.

FIGURE 3-13: G ENERATING CERTIFICATE REQUEST

3. Fill in all of the fields, and then click Generate Request. The following progress message appears on the page:

“Generating certificate signing request, please wait…”

4. Send the CSR, which looks like an encrypted block of undecipherable text, to a third party certificate authority of -

your choice for a signature.

5. After you receive the signed certificate, click the Install Certificate button to upload the signed certificate to the

device.

6. After the certificate is uploaded, select the desired mode.

7. Click Save.

NOTE: Depending on the third party certificate authority that signed your certificate, you might need to renew your -

certificate after a specified amount of time. Consult the certificate authority for more details.

 Upload Certificate

1. Click the Install New Certificate button located at the bottom of the SSL Configuration page. The Select Certificate

Install Method option buttons appear on the page.

2. Select Upload Certificate, and then click Next. The “ Certificate” opens.

FIGURE ERTIFICATE3-14: U PLOAD C

3. Choose the Certificate you to upload and then click want Upload button. The following progress message appears

on the page: “Loading data…”

4. After the certificate is uploaded, select the desired mode.

5. Click Save.

 Delete Certificate

1. Once you successfully upload a certificate, Delete Certificate button will appears at the bottom of the SSL

Configuration page.

2. If you want to delete the certificate, click the Delete Certificate, The following progress message appears on the

page: “Deleting certificate file…”

3. Click Save.

3.2.2.3 SSH

SSH -is a user enabled protocol that allows Pelco Product Support to log on to and service the camera for advanced

troubleshooting purposes.

From this page, users with the appropriate permissions can enable or disable SSH access to the camera.

FIGURE 3- : E15 NABLING SECURE SHELL

SSH Settings

1. Select the Enabled check box.

2. Click in the Password box and type a password (4 to 16 alphanumeric characters). Passwords are case- sensitive.

NOTE: The default username is “root” and cannot be changed. The username and password are required when

accessing the camera through a third party SSH client.-

3. Click in the “Re-type Password” box and retype your password.

4. Click the Save button to save the password and enable SSH, or click the Reset button to clear all of the information

you entered without saving it.

3.2.2.4 802.1x

802.1x is a port security that authenticates devices that want to establish a point point access through a wired or wirel-to- ess

port using Extensible Authentication Protocol (EAP). This port based authentication method prevents unauthorized access to a -

Local Area Network (LAN) through a physical port. For example, when a device is connected to a network port, the network

switch will ask the device for authentication.

If the credential is accepted when the device sends a credential to the network switch, the network switch will open the port for

normal use.

If authentication fails, the device is prevented from accessing information on the port.

FIGURE 3- : C16 ONFIGURING THE 802.1X PORT SECURITY SETTINGS

802.1x Port Security

WARNING: To prevent network conflicts, contact your network administrator before configuring the 802.1x port security

settings.

1. Select the option for the 802.1x Port Security. The default setting for 802.1x is On Off.

2. Select the Extensible Authentication Protocol (EAP) method from the Protocol drop down menu. Supported EAP -

methods include EAP EAP-MD5, -TLS, EAP-TTLS, and -PEAPEAP .

3. Type the information required for the selected 802.1x authentication method.

4. Connect the PC to an 802.1x secured switch that has the same EAP method.

5. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.2.5 SNMP

SNMP is an application layer protocol used to manage TCP/IP based networks from a single workstation or several -

workstations. The camera supports SNMP versions 2c and 3 and can be configured to send data using a trap.

FIGURE ONFIGURATION3-17: C SNMP

SNMP Configuration

WARNING: The Simple Network Management Protocol (SNMP) settings are advanced controls. Consult your network

administrator to obtain the required information to configure SNMP settings.

 No SNMP Server

None disables the SNMP configuration and is the default setting.

 CONFIGURING SNMP V2C

1. Select V2c as the SNMP Version.

2. Type the community name in the Community String box. The default name for the Community String is “public.”

3. Configure the Trap Configuration settings.

 Address: Type the host name or IP address of the recipient of the trap message.

 Community String: Type the name of the community that should receive the trap message.

4. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

 CONFIGURING SNMP V3

1. Select V3 as the SNMP Version.

2. Type the SNMP user name in the SNMP User field.

3. Select the encryption algorithm for authentication from the Authentication drop-down menu: None, MD5, or SHA.

If you use authentication method MD5 or SHA, type a password in the text box to the right of the selected

Authentication encryption.

4. Select the privacy encryption algorithm setting from the down menu: None, DES, or AES. If you use Privacy drop-

privacy method DES or AES, type a password in the text box to the right of the selected Privacy encryption.

5. Configure the address for the Trap Configuration. The Address is the host name or IP address of the recipient of

the trap message.

6. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

NOTE: SNMP V2c and SNMP V3 configuration settings are independent of each other, but only one SNMP version can

be active at a time.

3.2.2.6 Firewall

Set the Firewall function. A firewall is a system or group of systems that manages access between two networks.

F 3- : F C IGURE 18 IREWALL ONFIGURATION

Firewall

1. Select Allow or Deny mode to enable this function. The default setting is Off.

2. Type IP address in the Address field and select protocols. It is carried out over two transport layer protocols: TCP

(Transmission Control Protocol) and UDP (User Datagram Protocol)

 -TCP: a connection oriented, reliable-delivery, robust and high performance transport layer protocol.

 UDP: a connectionless protocol, it is efficient protocol for some services and is resourceful but difficult to

secure.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.2.7 F TP

This page will enable or disable access to this camera. In this page, users can activate a FTP Server to FTP access the SD

card for recordings. Enabled the FTP and use this function.

F 3- : F S IGURE 19 TP ETTINGS

FTP Settings

1. Select the Enabled check box te the FTP function follow the following procedures to set to activa , and

up related settings.

2. Enter a Username d if activate the FTP function.

3. the Enter a Password associated with Username.

4. Re- Ptype assword to confirm it.

5. Set the number of maximum connections by entering a number in the Max Connections field.

NOTE: This is the maximum of FTP Client connections, not the maximum of IE Window’s connections.

3.2.3 Imaging

Use the Imaging tab to change the camera’s general image settings, adjust the camera exposure, program the focus

mechanism, or define window blanking privacy areas.

F 3- : I S IGURE 20 MAGING ETTINGS

3.2.3.1 General

General imaging settings include adjustments for camera orientation and digital processing.

F 3- : G I SIGURE 21 ENERAL MAGING ETTINGS

Orientation

Use this setting when installing the camera in an inverted position. If the orientation is not adjusted, the image will display

upside down and mirrored.

Select one of the following options:

1. Click the “Flip left-to-right” box to rotate the camera image 180 degrees horizontally.

2. Click the “Flip top-to-bottom” box to rotate the camera image 180 degrees vertically.

Digital processing

Digital processing settings can adjust the camera’s noise reduction, sharpness, saturation, contrast, brightness and hue.

Move the slider to the left or right to change the following settings:

 3D Noise Reduction: Enable 3D Noise Reduction to improve video noise in low light scenes. Turn off 3D noise reduction

if details are blurred in moving objects.

 Sharpness: Controls the clarity of detail in a scene. Move the slider to the right to increase the sharpness; move the

slider to the left to decrease the sharpness. Increasing the sharpness also increases the image noise. The range of

adjustment is 100 to 100; the default setting– is 0 (zero).

 Saturation: Controls how intense or vivid the colors are in a scene. Move the slider to the right to increase the saturation

level; move the slider to the left to decrease the saturation level. The range of adjustment is 100 to 100; the defa– ult

setting is 0 (zero).

 Contrast: Controls gradations between the darkest and lightest portions of the scene. Move the slider to the right to

increase the contrast; move the slider to the left to decrease the contrast. The range of adjustment is –100 to 100; the

default setting is 0 (zero).

 Brightness: Controls the lighting detail in a scene. Move the slider to the right to lighten the image; move the slider to the

left to darken the image. The range of adjustment is –100 to 100; the default setting is 0 (zero).

 Hue: Controls the color in a scene. Move the slider to the right to achieve a cool color image; move the slider to the left to

achieve a warm color image. The range of adjustment is 100 to 100; the default setting is 0 (zero).–

Check Lock Settings box to lock the above Digital processing settings.

3.2.3.2 Exposure

Exposure is the amount of light detected by the camera sensor. A scene with correct exposure settings has adequate detail

and contrast between white and dark values. An image with too little or too much exposure eliminates detail in the scene. The

camera features Exposure and Day/ Night settings.

NOTE: IR Illumination function is available models in IR only.

F 3- : E S IGURE 22 XPOSURE ETTINGS

Exposure

 Priority

Select Motion or Low Noise as the exposure priority. The Motion setting increases exposure time to reduce motion

blurring in low light. The Low Noise setting decreases exposure time and adjusts frame rate for improved noise reduction

in low light scenes.

 Flicker Correction

Flickering by fluorescent light can be reduced by selecting “50Hz” if the power frequency is 50Hz, “60Hz”, if 60Hz.

Day/Night

The Day Night Auto mode setting automatically controls the IR cut filter depending on the Transition Level and Transition

Detect Time settings.

 Auto

1. Transition Level: Determines when the camera changes from day mode (color) to night mode (black white). Move -

the slider to the left or right to change the transition level to a lighter or darker setting. Select a lighter transition

level setting if you want the camera to change modes at a high lux setting. Use the default setting of 4 for normal

day/night operation. Use a darker transition level to change modes at a low lux setting.

TABLE 3-1. LUX TRANSITION POINTS FOR INCANDESCENT LIGHTING

Transition Level Setting

Day to Night Transition Point

Lighter

Darker

1 1.0 ~ 2.0 lux

2 0.50 ~ 1.0 lux

3 0.25 ~ 0.50 lux

4 0.125 ~ 0.25 lux

5 0.0625 ~ 0.125 lux

Check IR Illumination box to enable IR Illumination.

2. Transition Detect Time (sec): Controls the length of time the camera is exposed to a light level before it changes

to color or black white mode.-

This setting is useful for dark scenes where a bright light is momentarily introduced in the scene (for example,

when a car with its headlights turned on passes the camera scene).

 Manual

1. Day: If Day mode selected, the camera is forced to stay in Day mode all day.

2. Night: If Night mode selected, the camera is forced to stay in Night mode all day.

3. Night w/IR Illumination: Night w/IR IlluminationIf mode selected, the camera is forced to stay in Night w/IR

Illumination mode all day with IR illumination on.

3.2.3.3 Focus

Focus sets the back focus to the center focal point of the scene. The camera can be configured to back focus automatically or

manually. Auto focus automatically back focuses the camera on the subject in the center of the scene. Manual focus turns off

the auto focus mechanism and locks the camera at a user-specified position. The manual focus setting is recommended only

for indoor applications that have a single, unchanging primary light source. The Focus page also includes Full Range

Auto- -Focus, Quick Auto Focus, and a Restore Settings to Defaults.

FIGURE OCUS ETTINGS3- : F23 S

Focus

 Auto Focus

1. Temperature Change Refocus: The camera is programmed to run a quick automatic focus sequence when the

internal temperature sensor of the camera detects an environmental temperature change of 41°F (5°C). This focus

sequence adjusts the center focal point of the scene to maintain optimal focus. The default setting is ; select Off On

to turn on this setting.

2. Day/Night Switch Refocus: The default setting for the Day/Night Switch Refocus is Off. Select On if the camera’s

focal length is greater than 25 mm or the night scene uses mostly IR lighting. The best method to determine if the

day/night refocus should be enabled is to test the camera with the daytime light conditions, and then test it again

with the nighttime light conditions.

When enabled On this setting refocuses the camera when the camera changes from day mode (color) to night

mode (black white) or vice versa. For example, if the camera changes from day mode to night mode, the imager -

automatically adjusts the back focus for the change in light.

3. If required, use one of the following buttons to adjust the focus:

• Full Range Auto-Focus: The camera starts a full range search to find the optimal focal point for the scene.-

• Quick Auto-Focus: The camera searches for the optimal focal point in a limited range.

• Restore Settings to Defaults: The camera resets the auto focus to the factory default setting.

 Manual Focus

Select Manual Mode. Two sliders will appear, one for Day Manual Focus Position, the other for Night Manual Focus

Position. Each slider will show a value that is the best focus position for the camera during the day and night.

F 3- : M F IGURE 24 ANUAL OCUS

1. Day Manual Focus Position: If you need to fine tune the daytime focus, slightly move the - Day Manual Focus

Position slider to the left or right.

2. Night Manual Focus Position: If you need to fine tune the nighttime focus, slightly move the - Night Manual

Focus Position slider to the left or right.

3. If required, click the Restore Settings To Defaults button to reset the focus to the factory default setting.

Zoom

Manually move the Zoom slider to the left or right to zoom in or zoom out the image, adjust the zoom value from 1.00~3.00 to

get the desired field of view.

3.2.3.4 Window Blanking

Window blanking is used to conceal user-defined privacy areas. A blanked area appears on the screen as a solid gray

window. The camera can handle up to four blanked windows as long as the total blanked area does not exceed 50 percent of

the field of view.

FIGURE INDOW LANKING ETTINGS3- : W25 B S

Window Blanking

 Window Blanking On

1. Draw a window in the Live Preview area of the page:

a Hold down the left mouse button.

b Drag the mouse diagonally across the area you want to blank.

c -A color coded box appears in the Edit Window section of the page that is the same color as the window drawn

in the Live Preview area.

FIGURE INDOW NKING 3- : W26 BLA O N

NOTE: Up to four blanked windows can be defined, but the blanked area cannot exceed 50 percent of the field of view.

2. To resize the window, click and drag one or more of the points until the window is the desired shape and size.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

 Deleting a window blanking area

1. In the Edit Window area of the page, click the Delete button next to the window blanking area you want to delete.

2. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

 Window Blanking Off

1. Select the Off option for Window Blanking.

2. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.4 A/V Streams

Use the A/V Streams tab to configure the video and audio streams for the camera. The A/V Streams tab includes a Video

Configuration page and an Audio Configuration page.

F 3- : S IGURE 27 A/V TREAMS

3.2.4.1 Custom Video Stream Configuration

The Video Configuration page allows you to customize the compression, resolution, image rate, and bit rate of the video

streams. The default names for the streams are Primary Stream and Secondary Stream. Although each stream can be

configured independently, the settings of one stream can limit the options available to the other stream, depending on the

processing power used.

NOTE: Always configure the primary stream before the secondary stream. The primary stream should always be the most

resource-intensive of the streams.

F 3- : C V S C IGURE 28 USTOM IDEO TREAM ONFIGURATION

Select Preset

Presets are fully-configured video configurations that offer a good balance of video performance to bandwidth. These presets

may also be used as a starting point for a custom configuration.

Primary Stream

Select Custom in Select Preset and configure Primary Stream.

 Compression Standard

1. H264: A new version of MPEG 4 compression used in high ideo players such as Blu- -definition v -ray

™ and HD-DVD.

H.264 is the most processor intensive, but it requires the least amount of bandwidth.-

2. MJPEG: A commonly used video compression scheme. MJPEG has the least impact on the camera's processor,

but it requires the most bandwidth.

 Resolution

Refer to the following table for the resolution capabilities of your camera model.

TABLE TREAMS 3-2. CORRELATIONS OF RESOLUTIONS/ COMPRESSIONS/ S

Primary Stream Secondary Stream

Compression

Standard

Available

Resolutions

H264 H264 MJPEG MJPEG

2592 1944* 2592x1944 x N/A

800x600

640x480

800x600

640x480

2048x1536 2048x1536 2048x1536**

1280x960

800x600

640x480

1280x960

800x600

640x480

1920x1080 1920x1080 1920x1080

1280x720

1024x576

1280x720

1024x576

1600x1200 1600x1200 1600x1200

1280x960

800x600

640x480

1280x960

800x600

640x480

1280x960 1280x960 1280x960

1280x960

800x600

640x480

1280x960

800x600

640x480

1280x720 1280x720 1280x720

1280x720

1024x576

1280x720

1024x576

1024x576 1024x576 1024x576 1024x576 1024x576

800x600 800x600 800x600

800x600

640x480

800x600

640x480

640x480 640x480 640x480 640x480 640x480

*NOTE: 2592 x 1944 support only.s 5MP Model

** NOTE: 2048x1536 supports 5MP Model and 3MP Model only.

 Rate Control

The rate control setting determines the bit rate and quality of each frame in the video stream.

• CBR: The constant bit rate (CBR) streams video at a fixed number of bits per second. CBR uses the full capacity of

the bit rate setting for scenes with or without motion. Video is always streamed at the user bit rate setting.

Adjust the CBR Bit Rate slider that appears when CBR is selected to the optimal fixed number of bits per second.

• CVBR: The constrained variable bit rate (CVBR) provides high quality video and long recording time of variable bit -

rate while limiting variations in recording capacity consumption. Adjust the Maximum Bit Rate slider that appears

when CVBR is selected to the optimal bit rate for your configuration.

 Image Rate

The image rate is the number of images per second (ips) available for the video stream configuration. Available image

rates are 30, 25, 20, 16.67, 15, 12.5, 12, 10, 7.5, 5, 3, 2, and 1.

NOTE: The maximum image rate setting might not be obtainable due to the programmed compression standard and the

resolution of the stream.

 GOP Length

Select the GOP Length from 1 to he upper limit 150.T depends on the selected image ate.r Recovery of the lost frames

will be more difficult as the value gets bigger. Smaller values will increase the bit rate network bandwidth. This and

setting is only available with H264.

 QoS (DSCP) Codepoint

Quality of Service (QoS) for Differentiated Services Code Point (DSCP) is a code that allows the network to prioritize the

transmission of different types of data. This setting is only available with H264.

NOTES:

1. If you are not familiar with DSCP, contact your network administrator before changing this setting.

2. Your network must be configured to use QoS. If you are unsure if your network is QoS aware, contact your network -

administrator.

 Endura Signing

Enabling the Endura Signing feature allows an Endura® system to authenticate video from an Endura recorded stream.

This setting is only available with H264.

 Profile

The profile defines the subset of bit stream features in an H.264 stream, including color reproduction and additional video

compression. It is important that the selected profile is compatible with the recording device so that a stream can be

decoded and viewed.

1. Main: An intermediate profile with a medium compression ratio. Main is the default profile setting. This profile is

compatible with most recorders and uses fewer bits to compress video than the baseline profile; however, it uses

more bits than the high profile. The main profile supports I-frames, P-frames, and B- frames.

2. High: A complex profile with a high compression ratio. This is the primary profile for high-definition television

applications; for example this is the profile adopted for Blu ray and HD DVD. The high profile supports I- - -frames,

P-frames, and B-frames.

Secondary Stream

Select Custom in Select Preset and configure Secondary Stream. Repeat Primary Stream setting steps for the Secondary

Stream settings.

3.2.4.2 Audio Configuration

The Audio Configuration page allows you to setup the audio device. The default setting for Audio is disabled, which means

that no audio is transmitted from the camera. When enabled, audio is transmitted from the camera to the PC. Based on your

system configuration, images and audio may not be synchronized.

NOTE: Improper use of audio/visual recording equipment may subject you to civil and criminal penalties. Applicable laws

regarding the use of such capabilities vary between jurisdictions and may require, among other things, express written consent

from the recorded subjects. You are solely responsible for insuring strict compliance with such laws and for strict adherence to

any/all rights of privacy and personality.

F 3- : A C IGURE 29 UDIO ONFIGURATION

Audio In

 Enabled

Set to Enabled when receiving audio from a microphone plugged into the unit.

 Disabled

Set . to Disabled to close Audio In

Encoding

Two audio codecs G711- -Alaw/G711 Ulaw can be chosen from.

Level

The sound levels are selectable from 1~255.

NOTE: Changes to these settings cause video to restart.

3.2. Users5

Use the Users tab to create and manage user accounts and to change the way the camera manages the user settings.

FIGURE ONFIGURATION3- : U30 SERS C

3.2.5.1 General Settings

Use the General Settings page to set the public user access level. This access level is a predefined set of user permissions

that allows the camera to be accessed without logging on. Available permission levels depend upon the model of the device

that you are using.

The General Settings page also allows you to change the way the camera manages user and group settings. These settings

can be managed on a camera-to-camera basis or by using a centralized server to apply changes to multiple cameras.

F 3- : U G S IGURE 31 SERS ENERAL ETTINGS

Authentication Mode

 Open Authentication

Allows users to view video and use the camera API without validating user credentials. With Open Authentication

selected, you can select “Require password for Stream Selection” to limit privileges to authenticated users.

 Closed Authentication

Requires users to possess valid credentials to view video and access the camera API. Before selecting Closed

Authentication, ensure that your video management system supports Closed Authentication mode.

User and Group Management

Sarix cameras support two methods for managing the permissions of users and groups.

 Local Mode

The camera manages users and groups locally. This is the default setting.

 Remote Mode

The camera authenticates and manages users through an LDAP server supported by Microsoft® Active Directory®. This

allows administrators to tie cameras and group permissions into existing single sign-on services (SSO). Selecting

Remote Mode disables local user management settings.

Enabling Remote Mode

F 3- : EIGURE 32 NABLING REMOTE MODE

Select Remote Mode under User and Group Management.

1. Server settings for remote server

a Type the IP address or hostname of the LDAP server in the LDAP Server box.

b Type the port over which the camera will communicate with the LDAP server in the AP Port box. The default

port for AP Communications is 389.

c Type the distinguished name (DN) that is the basis for LDAP searches in the Base DN box.

d Provide the template to format the username (provided when the user logs on to the camera) for searches in

the LDAP directory in the Bind DN Template box.

e Provide the LDAP search query for users found in the base DN in the Search Template box. The search

must match an entry in the LDAP user record to the bind name (username).

2. Group Mappings for remote server

Input Group Mappings for each of the camera’s four user groups:

a Input the common name (CN) and DN for the group of users to whom you want to grant admin access in the

Admins box.

b Input the CN and DN for the group of users to whom you want to grant manager access in the Managers box.

c Input the CN and DN for the group of users to whom you want to grant operator access in the Operators box.

d Input the CN and DN for the group of users to whom you want to grant viewer access in the Viewers box.

3. A user must be authenticated by the remote server prior to entering remote mode.

In the User and Password boxes, input the credentials of a user who can be authenticated through the LDAP

server.

NOTE: Remote Mode (LDAP authentication) will not be enabled if you leave these fields blank or do not provide valid

credentials; this ensures that you cannot lock yourself out of the camera with invalid or incorrect LDAP settings.

4. Click Save.

3.2.5.2 Users

User accounts are created to limit the permissions of individuals who are logged onto the camera. The Users page also

includes four predefined access level settings that include Administrator, Manager, Operator, and Viewer permissions.

F 3- : N U IGURE 33 EW SERS

Creating a New User

Click New User button below the left box and Select the Access Level for the new user.

 Access Level

1. Select the Access Level for the user.

 Admins: This is the only defined group that cannot be deleted. This group has access to all permissions.

 Managers: This defined group can be modified or deleted. This group has access to all permissions except

the restore factory defaults, and API access permissions.

 Operators: This defined group can be modified or deleted. The default permissions for this group are single

stream view, stream selection, and multistream view.

 Viewers: This defined group can be modified or deleted. The default permissions for this group are single

stream view and multistream view.

2. Click the Save button to save the settings and create a new user. The new user profile appears in the box on the

left side of the page. Click the Reset button to clear all of the information you entered without saving it.

 Username

Click in the Username box and type a user name (2 to 23 alphanumeric characters). User names are not case-sensitive

and are saved in lowercase characters.

 Password

Click in the Password box and type a password (4 to 16 alphanumeric characters). Passwords are case-sensitive.

 Re-type Password

Click in the Retype Password box and retype your password.

Click the Save button to save the settings and create a new user (the new user profile appears in the box on the left side of the

page), or click the Reset button to clear all of the information you entered without saving it.

Deleting a User

1. Click the user profile that you want to delete from the defined users section located in the box on the left side of the

page.

2. Click the Delete User button. A dialog box appears with the message “Are you sure you want to delete this user?”

3. Click OK. The user profile is deleted from the defined user profiles section.

NOTE: The “ ” user cannot be deleted.admin

3.2.6 Events

Use the Events tab to configure camera events and analytics.

Events are activated by user defined event sources that tell the device how to react when an event occurs. Event handlers are -

the actions that the device takes when an event occurs. For example, a system source can be configured to send email to an

operator if the system shuts-down and restarts.

FIGURE ETTINGS3- : E34 VENTS S

3.2.6.1 Alarm Source

The Alarm source is the camera input for an external signaling device, such as a door contact or motion detector. Both

normally open and normally closed devices are supported.

F 3- : A S IGURE 35 LARM OURCE

Alarm Input Settings

1. Check Enabled button to enable Alarm Input.

2. Select either Normally Open or Normally Closed from the Polarity drop down menu. -

 Normally Open: An alarm will be triggered when the external contact closes.

 Normally Closed: An alarm will be triggered when the external contact opens.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.6.2 Motion Detection

This function is designed to record video once the unit detects a motion.

F 3- : M D S IGURE 36 OTION ETECTION ETTINGS

Motion Detection

1. Check Enabled button to enable Motion Detection.

2. Sensitivity: Choose different levels of sensitivity .from High, Medium, and Low

 High: Motion is activated with slight changes in brightness or motion.

 Low: Motion is activated with big changes in brightness or motion.

3. Set the to trigger motion detection The motion setup screen will desired area . be popped out for defining the

detection area by dragging the mouse.

FIGURE OTION 3- : M37 DETECTION ENABLED

4. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.6.3 Sabotage Detection

The Camera Sabotage behavior detects scene changes or contrast changes in the field of view. An event or alarm is triggered

if the lens is obstructed by spray paint, a cloth, or if it is covered with a lens cap. Any unauthorized repositioning of the camera

also triggers an event or alarm.

S cene Setup for Camera Sabotage

Install the camera in a high position, looking down on the scene. The field of view should be as large as possible. A small field

of view could result in the view being blocked by an adjacent object.

Avoid scenes with a dark, uniform background; low lighting; and large moving objects.

Sabotage Detection

1. Check Enabled button to enable Motion Detection.

2. Configure the settings:

 Sensitivity: s Determine the triggering sensitivity for alarm. High sensitivity is triggered most easily but is

prone to more false alarms sensitivity will only trigger an alarm for. Low s major issue like blackout.

 Event logging (Profile) name: -Type a user defined string name that will display within an alarm event to help

users to easily distinguish among cameras.

 Alarm Severity: Defines the severity of an alarm to allow the prioritization of alarms.

F 3- : S D IGURE 38 ABOTAGE ETECTION

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.6.4 FTP Upload Handler

Users can save image files via FTP by setting FTP recording condition beforehand.

F 3- : U H IGURE 39 FTP PLOAD ANDLER

FTP Upload Handler

You can store your image files base condition you haved on the Trigger set.

1. Check Enabled button to enable FTP Upload Handler.

2. Select an event from the corresponding content under the Trigger -Drop down menu and appears Remote Server.

Below are the Triggers configurations.

 Alarm: Saves an image to a defined FTP server when event activated.Alarm

F 3- : U H A S IGURE 40 FTP PLOAD ANDLER LARM ETTINGS

 Motion Detection: Saves an image to a defined FTP server when Motion Detection activated.

FIGURE OTION ETTINGS3- : U41 FTP PLOAD ANDLERH M DETECTION S

 Sabotage Detection: Saves an image to a defined FTP server when Sabotage Detection activated.

F 3- : U H S D S IGURE 42 FTP PLOAD ANDLER ABOTAGE ETECTION ETTINGS

 Scheduled: Saves an image to a defined FTP server when Scheduled event activated.

FIGURE ETTINGS3- : U43 FTP PLOAD ANDLERH SCHEDULED S

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

Remote Server

Remote Server is used as a service component to transfer files the IP address or hostname the Login by simply entering with

ID and password.

1. IP Address: Input a server name or address.

2. Port: Set “21” as default or change to dedicated number.

3. Username: Input a user name with privilege to access the server.

4. Password: Input the password associated with Username.

NOTE: The default Username and Password are “guest” and “1234”.

Alarm Settings

1. Set Pre-event Snapshots event Snapshots event Snapshot Interval event Snapshot In, Post- , Pre- , Post- terval,

File Name Prefix, and Server Path for Alarm, Motion Detection, and Sabotage Detection.

2. Set Trigger Interval time and determine the recording condition: OFF, All Day, Schedule 1, or Schedule 2 from

scheduled table during 24/7 for Scheduled Trigger.

3. the Set Server Path where the data is to be stored on the server.

4. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.6.5 Relay Open/Close Handler

Send a signal to an external device when an alarm or relay is triggered.

FIGURE ETTINGS3- : R44 ELAY OPEN LOSE /C HANDLER S

Relay Open/Close Handler

1. Check Enabled button to enable Relay Open/Close Handler.

2. Select the Alarm, Motion Detection or Sabotage Detection from the Trigger drop-down menu.

3. Move the On Time slider to set the amount of time that the relay will remain open. The time range is 0.1 to 200

seconds; the default setting is 0.1.

4. Move the Off Time slider to set the amount of time that the relay will remain closed. The time range is 0.1 to 200

seconds; the default setting is 0.1.

5. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

3.2.6.6 SD Record Handler

Save video clips of the activated event to an SD card. Before use this function, an SD card must be installed in the device.

NOTE: The SD card must be formatted as FAT32. Other formats are not compatible with the camera.

FIGURE ETTINGS3- : SD R45 ECORD HANDLER S

1. Check Enabled button to enable SD Upload Handler.

2. Select Alarm, , Motion Detection Network Loss Sabotage Detectionor from the Trigger drop-down menu.

3. Set a time interval for Alarm Recording, M Rotion ecording, and Sabotage Recording.

4. overwrite Set ON or Off to enable or disable the to be SD card overwritten automatically when the SD card is full

of recordings.

5. Usage: Information of SD card usage.

6. C SD Format: lick to erase information off of the SD card.

7. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

Viewing SD Card Files from a Remote Server

1. Configure the FTP Upload Handler and Alarm Source, Motion Detection, or Sabotage Detection settings.

2. Type “ftp://” followed by the IP address of the camera in a Web browser or Windows Explorer.

3. Right -click on a snapshot or recording from the SD card and save the file locally or open the file to view its content.

F ormat SD card as FAT32

1. Doubl e click guiformat.exe, the FAT32 Format window will pop up as the figure shows below .

2. Select the hard disk you want to format as FAT32 from the down menus, and then click /SD card Drive drop- Start

button to begin format the hard disk/SD card.

NOTE: Format will erase all information off of the hard disk/SD card. Make sure you have any important files

backed up before you format it.

FIGURE 3- : F46 FAT32 ORMAT

3. the When progress bar to complete format and exit the format window is full, click Close .

F 3-47: F C IGURE FAT32 ORMAT OMPLETE

3.2.6.7 SMTP Notification Handler

Set SMTP Notification Handler function and send an email to a defined email address when an event is activated.

NOTE: To use email notification, the camera must be connected to a local area network (LAN) that maintains an SMTP mail

server. Consult your network administrator for information on configuring email notification on your local network.

F 3-48: SMTP N H S IGURE OTIFICATION ANDLER ETTINGS

SMTP Upload Handler

1. Check Enabled button to enable SMTP Upload Handler.

2. Select the Alarm, Motion Detection, or Sabotage Detection from the Trigger drop-down menu.

The option you select should be checked as Enabled in the pictures below.

FIGURE 3-49: A LARM ENABLED

FIGURE OTION 3- : M50 DETECTION ENABLED

FIGURE ABOTAGE 3- : S51 DETECTION ENABLED

3. Click in the text boxes (Message, From, and Subject), and then type the necessary information in each text box.

4. Select the box if you want to send a JPEG as an attachment.Attach JPEG Snapshot

5. Continue set the SMTP Server and E-mail Address List.

SMTP Server

Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (e-mail) service across Internet Networking.

1. Host Address: Input a server name or address.

2. Port: set “25” as default or change to dedicated number.

3. Username: Input a user name with privilege to access the server.

4. Password: Input the password associated with Login ID.

5. Authentication: Select an authentication type.

 NO_AUTH: Namely No Authentication, means n . o restriction

 PLASMTP_P :LAIN IN is the name of a registered SASL authentication mechanism which serves as a

parameter to the AUTH command. The PLAIN authentication mechanism is described in RFC 2595. PLAIN is

the least secure of all the SASL authentication mechanisms since the password is sent unencrypted across

the network.

 LOGIN: The LOGIN mechanism is supported by Microsoft's Outlook Express as well as by some other clients.

 TLS_TTLS: TLS is usually implemented on top of any of the Transport Layer protocols encapsulating the

application-specific protocols such as HTTP, FTP, SMTP, NNTP and XMPP. The TLS protocol allows

client-server applications to communicate across a network in a way designed to prevent eavesdropping and

tampering. TLS can also be used to tunnel an entire network stack to create a VPN as is the case with

OpenVPN.

6. Continue set the E-mail Address List.

E- mail Address List

This function is designed to notify multiple users via email when Trigger is set.

1. Check Enable and input the E- mail Address accordingly.

2. Select Alarm, Motion or Sabotage for sending E-mail.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered

without saving it.

MPx

Sensor

Maximum

Reso

lution

5 MPx

3.2

-inch

2592 x 1944 (5 .0 MPx)

3 MPx

/3-inch

2048 x 1536 (3 .1 MPx)

2 MPx

/3-inch

1920 x 1080 (2 .1 MPx)

1 MPx

/4-inch

1 x 280 720 (0.9 MPx)

4-inch

800 600 x MPx)(0.5

MPx

Sensitivity

Color

Mono

33 ms

200 ms

33 ms

200 ms

5 MPx

1.2

0.30

lux

0.02

lux

0.10

lux

0.01

lux

3 MPx

1.2

0.30

lux

0.02

lux

0. 0 1

lux

0.01

lux

2 MPx

1.2

0.30

lux

0.02

lux

0. 0 1

lux

0.01

lux

1 MPx

1.4

0.30

lux

0.02

lux

0. 0 1

lux

0.01

lux

f/1.

0.30 lux

0. 02

lux

0.10

lux

0. 01

lux

Technical Specifications

Imaging

Device

Imager Type CMOS

Imager Readout Progressive scan

Electronic Shutter Range 1/5 ~ 1/2 ,000 sec

Dynamic Range 65 dB

White Balance Range 2,500° to 8,000°K

Digital Noise Reduction Yes (ON/OFF selectable)

Signal to Noise Ratio 50 dB

Minimum Illumination

Mechanical IR Cut Filter Yes (AUTO/MANUAL selectable), with different set points on lux

LENS

Lens type in; varifocal -Built

Focal Length f /1.2, 3~9 mm; f/1.4, 2.8~10 mm

Focus Autofocus, motorized

Zoom Remote

Auto Iris Type DC drive lens

Maximum Field of View*

MPx

Focal

Length

M ode

(Aspect Ratio)

Angle of View

Diagonal

Horizontal

Vertical

5 Wide 64° ° 88° 4:3 112

Tele

4:3

37°

30°

2 2°

Wide

4:3

111°

87°

64°

Tele ° 2 4:3 37 30° 2°

Wide

4:3

85°

67°

49°

Tele

4:3

29°

23°

17°

Wide

16:9

94°

81°

44°

Tele

16:9

32°

28°

16°

Wide

4:3

74°

58°

41°

Tele

4:3

23°

19°

14°

Wide 16:9 ° 3 84 71° 7°

Tele

16:9

26°

2 2°

13°

Wide

4:3

74°

58°

41°

Tele 4:3 23° 19° 14°

*Field of view may vary with changes in resolution settings

MPx

Ima Per Seco ges nd

(ips)

5 MPx

12 (full), 10, 5, 1

3 MPx

20 (full), 16.67, 15, 12.5, 110, 5,

2 MPx

30 (full), 25, 16 67, 5, 2 0, . 1 12.5, 10, 5, 1

1 MPx

30 (full), 25, 16 67, 5, 2 0, . 1 12.5, 10, 5, 1

MPx

idth

Height

As pect

Ratio

5.0

2592

1944

4:3

3.1

2048

1536

4:3

2.1

1920

1080

16:9

1.9

1600

1200

4:3

1.2

1280

960

4:3

0.9

1280

720

16:9

0.6

1024

576

16:9

0.5

960

540

16:9

0.5

800

600

4:3

0.3

640

480

4:3

0.1

320

240

4:3

0.1

320

180

16:9

VIDEO

Video Streams Up to 2 simultaneous streams, plus service stream; the secondary stream is variable based on the setup of the primary stream

Text Overlay Camera name, date/time, and customizable text with multiple supported languages

Available Resolutions

Frame Rates

Note:

Available frame rates are selectable for each independent stream depending on the coding, resolution, and stream configuration.

Video Encoding H.264 high or main profiles; and MJPEG

Bit Rate Control Constant bit rate (CBR), constrained variable bit rate (CVBR) with configurable maximum value

Service Stream 640 x 480 or 640 x 352; 2 ips, JPEG

Window Blanking 4 configurable windows

ELECTRICAL

Network Port -RJ 45 connector for 100Base- TX

Power Input 2) PoE (IEEE 802.3af, Class

24 VAC nominal, 18 to 32 VAC range

Power Consumption 6 W <

Local Storage Up to 32 GB on Micro SDHC or SDXC card

Alarm

Input 1

Output 1; PhotoMOS™ relay (30 V, 1 A)

Triggers Unsupervised mode that detects switch

closures (N.O. and N.C.)

ENVIRONMENTAL

Operating Temperature –10° to 50°C (–14° to 122°F)*

Storage Temperature 40° to 60°C ( 40° to 140°F) – –

Operating Humidity 20% to 85%, RH noncondensing

*Thermostatically controlled heating provides ramped heating control

between the initial heater on at 15°C (59°F) and full heating mode at

– – 40°C ( 40°F).

AUDIO

Streaming Dual channel -

Input Line in/terminal block

Encoding -G.711 A law/G.711 U- law

GENERAL

Construction Plastic body; polycarbonate bubble

Finish White, RAL 9003; satin texture

Pan/Tilt Adjustment Manual

Pan 355°

Tilt 75°

Rotate 360°

Weight 0.61 kg (1.34 lb)

NETWORK

Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),

ICMP, IPv4, IPv6, SNMP v2c/v3, HTTP, HTTPS,

SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS,

NTP, RTP, RTCP, LDAP (client), QoS

Users

Unicast 1 administrator, up to 4 viewers

Multicast Unlimited users H.264

Security Access Multiple user access levels with password

protection

INTEGRATION

Video Management Digital Sentry 7.3 (or later);

Endura 2.0 (or later);

-Third party VMS through Pelco API 1.0 and

ONVIF Profile S and Profile G

Mobile Application Integrated to Pelco Mobile App

Analytics Simple motion detection and camera

sabotage detection

Local Storage Capture 1- 5- , or 10 second video clips on -

camera sabotage, motion detection, or alarm

input; record video continuously in the case of

network outage with option to overwrite; access

video through FTP protocol and ONVIF

Profile

Camera Discovery

and Firmware Cameras discovered and firmware upgraded

through Pelco Device Utility 2 version 2.2 or

later; cameras discovered and firmware

upgrade through Endura Utilities

Web Browser Support Internet Explorer

9.0, Safari

7.0.6, Firefox

31.0, Chrome

™

37.0.2062.124 m and later

Resolution

ens

Model Number

with Mount

In Ceiling-

3 to 9 mm

IMP -519 1I

3 to 9 mm

IMP -319 1I

3 to 9 mm

IMP -219 1I

2.8 to 10 mm

IMP -1110 1I

2.8 to 10 mm

IMP

0-1I

Surface nMou

3 to 9 mm

IMP

519 1S-

3 to 9 mm

IMP

319 1S-

3 to 9 mm

IMP

219 1S-

2.8 to 10 mm

IMP

1110 1S-

2.8 to 10 mm

IMP

110-1S

ant

3 to 9 mm

IMP

519-1P

3 to 9 mm

IMP

319-1P

3 to 9 mm

IMP

219-1P

2.8 to 10 mm

IMP

1110-1P

2.8 to 10 mm

IMP

0-1P

MODELS

Pelco Troubleshooting Contact Information

If the instructions provided fail to solve your problem, contact Pelco Product Support at 1 and Canada) or - -800 289-9100 (USA

+1- - -559 292 1981 (international) for assistance. Be sure to have the serial number available when calling.

Do not try to repair the unit yourself. Leave maintenance and repairs to qualified technical personnel only.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the

European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures

for recycling this equipment.

REVISION HISTORY

Manual # Date Comments

C3955M 10/13 Original version.

C3955M 10/14-A Updated specification and operation sections.

C3955M 05/15 - B Added IPv6 information.

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates.

ONVIF and ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of their respective companies.

Product specifications and availability are subject to change without notice.

Product specificaties

Merk:	Pelco
Categorie:	Bewakingscamera
Model:	Sarix Professional IMP1110-1S
Kleur van het product:	Wit
Gewicht:	610 g
Hoogte:	138 mm
Gewicht verpakking:	810 g
Soort:	IP-beveiligingscamera
Materiaal behuizing:	Kunststof
Bluetooth:	Nee
Maximale capaciteit van de geheugenkaart:	32 GB
Ondersteund audioformaat:	G.711
Ondersteunde videoformaten:	H.264
Vormfactor:	Dome
Automatisch scherpstellen:	Ja
Ondersteuning voor plaatsing:	Binnen
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond
Maximum resolutie:	1280 x 720 Pixels
Totaal aantal megapixels:	1 MP
Diameter:	138 mm
Type stroombron:	Power over Ethernet (PoE)
Minimale belichting:	0.02 Lux
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSDHC, MicroSDXC
Ingebouwde HDD:	Nee
Zoomcapaciteit:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Gemotoriseerd
Brandpuntbereik:	2.8 - 10 mm
Omvang optische sensor:	1/4 "
Type beeldsensor:	CMOS
Camera sluitertijd:	1 ~ 1/8, 000 s
Witbalans:	Auto
Type camerasluiter:	Elektronisch
Webbrowser:	Ja
Ruisonderdrukking:	Ja
Temperatuur bij opslag:	-40 - 60 °C
Maximaal 30 frames per seconde:	30 fps
Ondersteunde netwerkprotocollen:	TCP/IP, UDP/IP (unicast, multicast IGMP), ICMP, IPv4, IPv6, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP (client), QoS
Web-gebaseerd management:	Ja
Progressive scan:	Ja
Signaal/ruis-verhouding:	50 dB
Draaihoek:	360 °
Pan bereik:	0 - 355 °
Aantal lenzen:	1
Methode voor streaming:	Multicast, Unicast
Aantal sensoren:	1
Videostreaming:	Ja
Infrarood (IR)-afsluitingsfilter:	Ja
Alarm ingang/uitgang:	Ja
Bitratecontrole:	Constant Bit Rate (CBR), Variable Bit Rate (VBR)
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Stroomverbruik (typisch):	6 W
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	-40 - 60 procent
Bereik kantelhoek:	0 - 75 °
Management software:	Digital Sentry 7.3 (or later); Endura 2.0 (or later);Third-party VMS through Pelco API 1.0 and ONVIF Profile S and Profile G