PCE Instruments PCE-PA 7200 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-PA 7200 (38 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/38
1. INTRODUCTION
NOTE
This Power Meter has been designed and tested
according to CE Safety Requirements for Electronic
Measuring Apparatus, IEC/EN 61010-1 and other safety
standards. Follow all warnings ensure safe operation.to
WARNING
READ "SAFETY NOTES" (NEXT PAGE) BEFORE
USING THE METER.
CAT IV – Measurements performed the source the at of
low voltage installation.
CAT III Measurements performed –in the building
installation.
CAT II
– Measurements performed on circuits directly
connected to the low voltage installation.
-1-
2. SAFETY NOTES
1. Read following safety information carefully before the
attempting to operate or service the meter.
2. Use the meter only as specied in this manual.
Otherwise the protection provided by the meter may
be impaired.
3. Keep drying when using this product.
4. reduce To the risk of electric shock, do not remove
cover.
5. not use this product while getting wet.Do is
6. Never give shocks, such as vibration or drop, which
may damage the meter.
7. The maximum measurement current is 1000A.
8. Rated environmental conditions :
(1) Indoor 600Vac.
(2) Installation Category III.
(3) Pollution Degree 2.
(4) Altitude up 2000 meter.to
(5) Relative humidity max.80%
(6) Ambient temperature 0~40℃.
-2-


Product specificaties

Merk: PCE Instruments
Categorie: Meetapparatuur
Model: PCE-PA 7200

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-PA 7200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur PCE Instruments

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur