PCE Instruments PCE-IT55 Handleiding

PCE Instruments Meetapparatuur PCE-IT55

Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-IT55 (7 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

1 2

DIGITAL INSULATION TESTER

INSTRUCTION MANUAL

SAFETY INFORMATION

 Read the following safety information carefully before

attempting to operate or service the meter.

 To avoid damages to the instrument do not apply the

signals which exceed the maximum limits shown in the

technical specifications tables.

 Do not use the meter or test leads if they look damaged.

Use extreme caution when working around bare

conductors or bus bars.

 Accidental contact with the conductor could result in

electric shock.

 Use the meter only as specified in this manual;

otherwise, the protection provided by the meter may be

impaired.

 Read the operating instructions before use and follow

all safety Information.

 Caution when working with voltages above 60V DC or

30V AC RMS. Such voltages pose a shock hazard.

 Before taking resistance measurements or testing

acoustic continuity, disconnect circuit from main power

supply and all loads from the circuit.

3 4

Safety symbols:

Caution refer to this manual before using the meter.

Dangerous voltages.

Meter is protected throughout by double insulation or

reinforced insulation.

When servicing, use only specified replacement parts.

CE Comply with EN-61010-1

1. SPECIFICATIONS

1-1 General Information

Environment conditions:

①①①① Installation Categories II

②②②② Pollution Degree 2

③③③③ Altitude up to 2000 meters

④

④④

④

Indoor use only

⑤⑤⑤⑤ Relatively humidity 80% max.

⑥

⑥⑥

⑥

Operation Ambient 0~40ºC

Maintenance & Clearing:

①

①①

①

Repairs or servicing not covered in this manual should

only be performed by qualified personnel.

②②②② Periodically wipe the case with a dry cloth. Do not use

abrasives or solvents on this instruments.

Display: Large LCD with dual display

Measurement Range: 200 , 200k , 200M /250V, Ω Ω Ω

200M /500V, 2000M /1000V, Ω Ω

750V/ACV, 1000V/DCV.

Sampling Rate: 2.5 times per second.

Zero Adjustment: Automatic adjustment.

Over Range Indicator: Number 1 of highest digit is

displayed.

Low Battery Indication: The is displayed when the

battery Voltage drop below the

operating voltage.

Operating Temperature: 0ºC to 40ºC (32ºF to 104ºF) and

Humidity below 80% RH

Storage Temperature: -10ºC to 60ºC (14ºF to 140ºF) and

Humidity below 70% RH

Power source: DC9V (6x1.5V Size “AA” battery or Equivalent)

Dimensions: 200(L) x 92(W) x 50(H) mm

Weight: Approx 700g include battery

Accessories: Test leads, 6pcs battery, Carrying case, manual.

5 6

1-2 Electrical Specifications

Accuracies are specified in the way:

±(…% of reading +…digits) at 23ºC 5ºC,below 80% RH. ±

OHMS

Range Resolution

Accuracy

Max. open

Circuit

Voltage

Overload

Protection

200 0.1 Ω Ω

+(1%+2) 4.5V 250Vrms

200k 0.1k 3.0V Ω Ω

Continuity Beeper

Range Resolution

Operation

Resistance

Max.open

Circuit

Voltage

Overload

Protection

•))) 0.1

Ω

Resistance 40≤

Ω

4.5V 250Vrms

Short circuit current 200mA ≤

DC Voltage

Range Resolution Accuracy Input

Impedance

Overload

Protection

1000V 1V +(0.8%+3) 10M 1000Vrms Ω

AC Voltage (40Hz~400Hz)

Range Resolution

Accuracy Input

Impedance

Overload

Protection

750V 1V +(1.2%+10)

10M 750Vrms Ω

Meg OHMS

Range Resolution Accuracy Terminal Voltage

200M

Ω

/250V 0.1M

Ω

+(3%+5)

250V+10%~-0%

200M

Ω

/500V 0.1M

Ω

500V+10%~-0%

0~1000M

Ω

/1000V

Ω

1000V+10%~-0%

1000~2000M

Ω

/1000V

+(5%+5)

Range Test Current Short circuit current

200M /250V Ω

1mA

250K (load) Ω

≤

1mA

200M /500V 500K (load) Ω Ω

0~1000MΩ

/1000V 1M Ω

1000~2000MΩ

/1000V

Product specificaties

Merk:	PCE Instruments
Categorie:	Meetapparatuur
Model:	PCE-IT55

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-IT55 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Meetapparatuur PCE Instruments

PCE Instruments PCE-RCM 16 Handleiding

17 November 2024

PCE Instruments PCE-EVSE 300 Handleiding

17 November 2024

PCE Instruments PCE-SFS 10 Handleiding

17 November 2024

PCE Instruments PCE-HLD 10 Handleiding

17 November 2024

PCE Instruments PCE-VE 270HR Handleiding

17 November 2024

PCE Instruments PCE-COM 20 Handleiding

17 November 2024

PCE Instruments PCE-RT 1200 Handleiding

17 November 2024

PCE Instruments PCE-PMI 1BT Handleiding

17 November 2024

PCE Instruments PCE-AC 2000 Handleiding

17 November 2024

PCE Instruments PCE-MIR 10 Handleiding

22 Oktober 2024

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Festo NEDY Handleiding

21 November 2024

Festo DFPD-10 Handleiding

21 November 2024

Dostmann Electronic RLD 380 Handleiding

20 November 2024

Milwaukee 2225-20 Handleiding

19 November 2024

Kübler Codix 542 Handleiding

19 November 2024

HT Instruments FULLTEST3 Handleiding

19 November 2024

Joy-it VM-433 Handleiding

18 November 2024

Joy-it VAM-10010 Handleiding

18 November 2024

Rotronic CP11 Handleiding

18 November 2024

Techno Line MA 10230 Handleiding

18 November 2024