PCE Instruments PCE-DC 25 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-DC 25 (22 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
© PCE Instruments
PCE-DC 25 Clamp Meter
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский,
中文
中文
中文中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 10 May 2024
v1.0
English
© PCE Instruments
Contents
1 Safety notes ........................................................................................... 1
2 Specications ........................................................................................ 2
3 Delivery scope ....................................................................................... 4
4 Device description ................................................................................ 4
4.1 Display description ........................................................................................................... 6
5 Making a measurement ........................................................................ 6
5.1 Carry out direct current / alternating current measurements ............................................. 7
5.2 Inrush current measurement 8 ............................................................................................
5.3 Carry out DC voltage / AC voltage measurements 9 ...........................................................
5.4 Voltage measurement with low internal resistance of the device .....................................11
5.5 Capacitance, resistor, continuity, diode measurement .....................................................12
5.6 Temperature measurement .............................................................................................13
5.7 Current measurement with additional current clamp ........................................................13
5.8 N -contact voltage measurement (NCV) on .......................................................................14
6 Set measurement range ..................................................................... 14
7 Hold measured value .......................................................................... 15
8 Highest and lowest measured value ................................................. 15
9 Set measured value in relation .......................................................... 16
10 Determine peak values (PEAK) .......................................................... 16
11 Menu ..................................................................................................... 17
11.1 General settings (Setup) .................................................................................................17
11.2 Saved individual measured values (Measurement) .........................................................17
11.3 Data logger (Recording) ..................................................................................................18
12 Inserting/replacing batteries .............................................................. 18
13 Torch .................................................................................................... 18
14 Bluetooth connection ......................................................................... 19
15 Contact ................................................................................................. 19
16 Disposal ............................................................................................... 19
© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the rst time. The
device may only be used by qualied personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moistur e.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualied PCE Instruments personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specications must not be exceeded under
any circumstances.
Non-observance of the safety notes can cause damage to the device and injuries to
the user.
No voltage must be applied to the meter when the resist function is selected. or
Switch o the meter when not in use.
Select the measuring task before connecting the test leads to the meter.
The rotary selector switch must not be moved during a measurement.
When measuring current, the voltage applied must not exceed 600 V AC/DC.
Before replacing the batteries, the test leads must be removed and the meter must be
switched o.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.


Product specificaties

Merk: PCE Instruments
Categorie: Meetapparatuur
Model: PCE-DC 25

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-DC 25 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur PCE Instruments

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur