PCE Instruments PCE-CBA 20 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-CBA 20 (15 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
© PCE Instruments
PCE-CBA 20 Car Battery Tester
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский,
中文
中文
中文中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 28 December 2020
v1.0
English
© PCE Instruments
Contents
1 Safety notes ........................................................................................... 1
2 Specications ........................................................................................ 1
3 Delivery contents .................................................................................. 2
4 System description ............................................................................... 2
5 Operation ............................................................................................... 2
5.1 Battery capacity ................................................................................................................ 3
5.2 Battery voltage at engine start .......................................................................................... 5
5.3 Charging voltage at maximum load .................................................................................. 6
5.4 Charging voltage .............................................................................................................. 7
6 Comparison charts ............................................................................... 8
6.1 JIS 8...................................................................................................................................
6.2 DIN / EN ..........................................................................................................................10
7 Contact ............................................................................................... 12
8 Disposal ............................................................................................... 12
© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the rst time. The
device may only be used by qualied personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualied PCE Instruments personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specications must not be exceeded under
any circumstances.
Non-observance of the safety notes can cause damage to the device and injuries to
the user.
Only test batteries the parameters of which you can set.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
2 Specications
Specication
Description
Measurement object
12 V / 24 V starter batteries
Battery standards
DIN, JIS, EN, SAE
Test time
3 … 10 s
Cold cranking ampere CCA
100 … 1700 A
Display
2.75“ LCD
Power supply
9 ... 35 V DC via test voltage
Connection
Kelvin terminals
Dimensions
185 x 95 x 41 mm
Cable length
approx. 70 cm
Weight
approx. 250 g


Product specificaties

Merk: PCE Instruments
Categorie: Meetapparatuur
Model: PCE-CBA 20

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-CBA 20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur PCE Instruments

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur