PCE Instruments PCE-789 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-789 (34 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/34
Manual
Version 1.0
Date o creation: 17.08.2016f
Date o last change: 02f .09.2016
Multifunction Calibrator PCE-789
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.com
Contents
1 Introduction ............................................................................................................. 2
2 Safety notes ............................................................................................................. 2
3 Specification ............................................................................................................ 3
4 System description ................................................................................................. 6
5 Contact ................................................................................................................... 34
5.1 PCE Instruments UK ................................................................................................................ 34
5.2 PCE Americas .......................................................................................................................... 34
1 Introduction
Thank you for purchasing a calibrator PCE- rom PCE Instruments. 789 f
The multifunction calibrator PCE-789 is a versatile instrument for measuring and simulating of al the
process signals. Both current and voltage signals can be simulated and measured with the multifunction al
calibrator. The characteristics of many thermocouple types are stored in this
Multifunction calibrator and permit entry and display of values in ° C. a special feature in this device is the
an integrated functional generator. Besides the waveforms sine, triangle, square and cut sine 10 further
curve forms are stored in the multifunctional calibrator. In addition, due to the supplied software, also
specic waveforms can be created and stored in the device. Furthermore this device can output two ,
superimposed frequencies. This functionality is combined with a robust plastic housing and allows
applying this multifunctional calibrator in many areas. For maintenance engineer in industry, the engineer
in the laboratory, as well as for the technicians in the service area this Multifunction Calibrator is a useful
tool, with the help of which many tasks can be completed. For mobile use, in addition to the power supply
via a power adapter the operation on battery is also possible.
1.1 Delivery
1 x Carrying case
1 x Manual
1 x AC Adapter
1 x USB cable
1 x Software CD
1 x Software Guide
1 x K-type thermocouples
2 x Alligator clip (red and black)
2 x Test leads (black and red)
1 x Rechargeable Lithium Battery (11,1V / 1600mAh)
2 Safety Notes
Please read this manual carefully and completely before you use the device for the rst time. The device
may only be used by qualied personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
2.1 Warning Symbols
General warning
Warning about dangerous electrical voltage
Manual
3
2.2 Warning Notes
This instrument must only be used in the manner, described in this manual. If the instrument is
used otherwise, dangerous situations may occur.
Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or wetness.
The opening of the case should only be done by the qualified personnel of the PCE Instruments.
The instrument should never be placed with the user interface (e.g. keyboard side on a table)
Never use the device with wet hands.
You should not make technical changes on the device.
. Do not use abrasives or solvent-based The appliance should only be cleaned with a damp cloth
cleaners.
The device may only be used with accessories oered by PCE or equivalent replacement.
Before each use of this instrument, please, check the housing and test leads for visible damage.
If the visible damage occurs, the device may not be used.
Further this instrument must not be used when the environmental conditions emperature, , (t
humidity ...) are not within the limits mentioned in the specications.
The instrument must not be used in an explosive atmosphere.
indicated by the battery indicator) the device should If the battery is empty, (e.g., it may be not be
used any more, as dangerous situations may arise because of false readings. Only after the
battery is replaced or the accumulator is charged, the meter may be used again.
Before each use, please check the meter by measuring a known parameter.
The limit values for the measurement parameters given in the specification may not be exceeded
under any circumstances.
Before starting the measurement, always check, whether the correct measuring range is set, and
whether test leads are plugged into the sockets provided for the respective measurement. the
The measurement tips should never be touch on the bare ends, since there is a risk of electric ed
shock.
The device is designed for indoor use.
Carry out the measurements of high voltages (> 30 V AC) with extra caution.
Before opening the housing for the replacement of battery or fuse, please remove all test leads,
as otherwise there is a risk of electric shock.
Non-observance of the safety notes may bring to the damage of the device and injury of the
operator.
This user's handbook is published from P Instruments without any guarantee. CE
We expressly point to our general guarantee terms, they can be found in our general terms of business.
If you have any questions please ntact PCE Instruments. co
3 Specification
(23+/- 5 ° C, 10 minutes after switching on)
mA (source function) (Vopen> 15V)
Measuring range
Resolution
Reading accuracy
-4mA to -0,005mA
1μA
± % / ± 5dgts 0.1
0,005mA to 4mA
1μA
± % / ± 5dgts 0.1
4mA to 20mA
1μA
± % / ± 5dgts 0.1
20mA to 24mA
1μA
± % / ± 5dgts 0.1
V (source function) (max. load 1mA, short circuit protection < 100mA)
Measuring range
Resolution
Reading accuracy
-3V to -0,005V
0.001V
± % / ± 5dgts 0.1
0,005V to 10V
0.001V
± % / ± 5dgts 0.1
10V to 15V
0.001V
± % / ± 5dgts 0.1


Product specificaties

Merk: PCE Instruments
Categorie: Meetapparatuur
Model: PCE-789

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-789 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur PCE Instruments

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Extech

Extech 380926 Handleiding

22 Oktober 2024
Extech

Extech 380941 Handleiding

22 Oktober 2024
CSL

CSL 306637 Handleiding

20 Oktober 2024
Stamos

Stamos S-LS-58 Handleiding

15 Oktober 2024
Stamos

Stamos S-LS-41 Handleiding

15 Oktober 2024
MSW

MSW -BLT-100A Handleiding

15 Oktober 2024
Stamos

Stamos S-LS-29 Handleiding

15 Oktober 2024
Stamos

Stamos S-LS-31 Handleiding

15 Oktober 2024
Stamos

Stamos S-LS-34 Handleiding

15 Oktober 2024
Stamos

Stamos S-LS-59 Handleiding

15 Oktober 2024