PCE Instruments PCE-3500 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-3500 (50 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/50
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.com
Bedienungsanleitung
Durometer
PCE-3500
HARDNESS TESTER PCE-3500
1
CONTENTS
1. Introduction 2
2. Appointment 2
3. Specications 2
4 Packing list 5 .
5. Principle of operation 5
6. Preparations for operation 7
7. Basics of operation 8
8. Operation 9
9. Hardness measurement 19
10. Measurement modes 30
11. Calibration 35
12. Technical maintenance, special conditions of operation 46
13. Precautions and trouble shouting 48
14 . Manufacturer’s guarantee and service maintenance 49
HARDNESS TESTER PCE-3500
2
1. Introduction
The following operation manual explains the preparation, setup,
principles of operation, usage, and troubleshooting of the hardness
tester PCE-3500.
Please, read this instructions carefully for operate the hardness
tester PCE-3500 functions quickly and eectively.
In doing this you will be able to take full advantage of the function
range of the instrument. At the same time, you will also avoid errors
and wrong operation which in turn would cause incorrect test results
and thus could lead to injury and damage.
2. Appointment
The hardness tester PCE- is handy, easy to operate and can 3500
carry out tests quickly without any diculties.
Hardness tester PCE-3500 is mainly suitable:
• for measurement hardness of low and non-alloyed steels;
• for measurement hardness of high-alloyed steels;
• for measurement hardness of nonferrous metals.
3. Specications
3.1. Calibration scales
Device has calibration scales of hardness that conventionally 88
divided into eight scales and eleven materials for each:


Product specificaties

Merk: PCE Instruments
Categorie: Meetapparatuur
Model: PCE-3500

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-3500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur PCE Instruments

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur