PCE Instruments PCE-170 A Handleiding

PCE Instruments Meetapparatuur PCE-170 A

Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-170 A (2 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

PCE-1 A 70

MINI LIGHT METER

WEEE-Reg.-Nr. DE69278128 GCBPCE337-00000

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@industrial-needs.com

I. Safety Information

Read the following safety information carefully before

attempting to operate or service the meter.

Use the meter only as specified in this manual; otherwise,

the protection provided by the meter may be impaired.

Environment Conditions

Altitude up to 2000 meters

Relative humidity 90% max.

Operation Ambient 0 to 40℃

℃

℃℃

Maintenance & Clearing

Repairs or servicing not covered in this manual should

only be performed by qualified personnel.

Periodically wipe the case with a dry cloth. Do not use

abrasives or solvents on this instrument.

Safety symbols

Comply with EMC, FCC

When servicing, use only specified replacement

parts.

II、

、

、、General Description

Thank you for using our Light Meter. To ensure that you can

get the most from it, we recommend that you read and

follow the manual carefully before use. The Light Meter has

been designed, manufactured, and delivered under strict

quality control criteria by a factory certified.

 Easy to use

 Automatic zero

 Automatic range

III、

、

、、Specifications

Measuring ranges：

0.00 to 39.99/399.9/3999/39990 lx

0.000 to 3.999/39.99/399.9/3999 fc

automatic/manual selection of range

Resolution : 0.01 lx ~ 10 lx ; 0.001 fc ~ 1 fc

Accuracy：± ﹪3 rdg ±5 dgts

Temperature characteristics：± ﹪ ℃0.1 /

Response time：0.5 sec.

Light detector Si Photodiode ：

Operation temp./humidity：

0℃ ~ 40℃ ℉(32 ~ 104℉ ，) 0 ~ 80﹪RH

Storage temp./humidity：

-10℃ ~ 50℃ ℉(14 ~ 122℉ ，) 0 ~ 70﹪RH

Over range："----" display

Power supply :

one 9V battery，006P or IEC 6F22 or NEDA 1604

Power life：Approx. 170 hours (Alkaline battery)

Dimensions：

196(L) 54(W) × ×33(H) mm

7.7(L) X 2.1(W) X 1.3(H) inch

Weight：Approx. 180g

Accessories：9V battery , instruction manual

IV、

、

、、Name and functions

○

○○

1 Light detecting surface

○

○○

2 Protect cover

○

○○

3 LCD display

○

○○

4 Power button

○

○○

5 CAL button: Quick enter measuring mode

During the measuring mode, press CAL button and the

value of zero will be auto-displayed.

○

○○

6 HOLD button:

The user may hold the present reading and keep it on the

LCD display by pressing the “HOLD” button. To release the

held data operation by pressing it again. The user can

press the button when the value is hard to read, such as

measuring in the dark place.

○

○○

7 fc/lx selector button

○

○○

8 Range selector button:

This button is used to select automatic range and manual

range. Manual range enables an arbitrarily four range to be

set. If a fixed range is used, measuring values will

response quickly. The user can read easily.

The range configuration is as follows:

Auto , 40 , 400 , 4000 , 40000 lx

Auto , 4 , 40 , 400 , 4000 fc

○

○○

9 Battery cabinet cover

○

○○

10 Indicate low battery voltage

○

○○

11 Measuring readout

○

○○

12 Indicate automatic range mode

○

○○

13 Indicate meter in automatic power off mode

This Light Meter provides an automatic power-off function

in order to avoid using up the battery if you forget to turn

off the power. The meter will power off itself after 30

minutes if no key is operated.

○

○○

14 Indicate data hold

○

○○

15 Unit of illuminance

○

○○

16 Indicate range

Note：

：

：：1fc＝10.76lx

V、

、

、、Operation

Press the power button to turn on the power. Notice that

covering the light-detecting surface with the cap.. will

auto-appear on the LCD display. After appears, the

meter enters the automatic zero adjustment. When automatic

zero adjustment is completed, disappears and “ ”

appears. After confirming the “ ” display, remove the cap

to start measuring.

After the measurement has been completed, press the power

button again to turn off the power, and cover the light-detecting

surface with the cap for protecting against stray light.

Note:

If appears, check the cap to make sure it is on

properly.

Press and hold the HOLD button, and then power on the meter,

release all button to disable the AUTO POWER OFF function.

“ ” symbol will disappear on the LCD display.

VI、

、

、、Replacement of battery

When the battery voltage drops below the operating voltage ,

a“ “ symbol will appear on the LCD display. In this

case, replace a new battery immediately.

VII、

、

、、Characteristics of relative

visible-spectrum response

400 500 600 700 800

100%

Spectral Sensitivity

Wavelength(nm)

Relative Sensitivity

CIE Photopic Curve Light Meter

VIII、

、

、、Precautions on handling

Operating carefully, and do not drop the meter or hit it with a

hard object. Avoid using the meter in a dirty, dusty, or salt-air

area or where there are corrosive gases. If dirt or dust

adhered to the surface of detecting light, will decrease

accuracy of the measuring value. To clean the surface by

wiping with a soft and dry cloth.

13 14

16 16

Product specificaties

Merk:	PCE Instruments
Categorie:	Meetapparatuur
Model:	PCE-170 A

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-170 A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Meetapparatuur PCE Instruments

PCE Instruments PCE-PST 1 X Handleiding

16 December 2024

PCE Instruments PCE-LMDC 200 Handleiding

3 December 2024

PCE Instruments PCE-WS US2 Handleiding

3 December 2024

PCE Instruments PCE-LOC 10 Handleiding

3 December 2024

PCE Instruments PCE-HVAC 6 Handleiding

3 December 2024

PCE Instruments PCE-VE 260HT Handleiding

3 December 2024

PCE Instruments PCE-RCM 16 Handleiding

17 November 2024

PCE Instruments PCE-EVSE 300 Handleiding

17 November 2024

PCE Instruments PCE-SFS 10 Handleiding

17 November 2024

PCE Instruments PCE-HLD 10 Handleiding

17 November 2024

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

TFA 40.1001 Handleiding

21 December 2024

Ansmann Comfort Check Handleiding

20 December 2024

Steinberg SBS-LF-147 Handleiding

15 December 2024

Steinberg SBS-SM-135C Handleiding

15 December 2024

Steinberg SBS-MT-100 Handleiding

15 December 2024

Steinberg SBS-SM-130C Handleiding

15 December 2024

Steinberg SBS-DT-999 Handleiding

15 December 2024

Steinberg SBS-DL-123D Handleiding

15 December 2024

Steinberg SBS-LF-141 Handleiding

15 December 2024

Steinberg SBS-LF-140 Handleiding

15 December 2024