Panasonic TH-L24XM6M Handleiding

Panasonic Televisie TH-L24XM6M

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic TH-L24XM6M (3 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 174 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Safety Precautions

To help avoid risk of electrical shock, fire, damage or injury,

please follow the warnings and cautions below:

ŶMains plug and lead

Warning

If you detect anything unusual,

immediately remove the mains

plug.

ƔMains plug types vary

between countries.

ƔThis TV is designed to operate on:

–TH-L24XM6K: AC Single 220 - 240 V, 50/60 Hz

–Other models: AC Auto 110 - 240 V, 50/60 Hz

ƔInsert the mains plug fully into the socket outlet.

ƔEnsure that the mains plug is easily accessible.

ƔDisconnect the mains plug when cleaning the TV.

ƔDo not touch the mains plug with wet hands.

ƔDo not damage the mains lead.

• Do not place a heavy object on

the lead.

• Do not place the lead near a

high temperature object.

• Do not pull on the lead. Hold

onto the mains plug body when

disconnecting the plug.

• Do not move the TV with the lead plugged into a socket

outlet.

• Do not twist the lead, bend it excessively or stretch it.

• Do not use a damaged mains plug or socket outlet.

• Ensure the TV does not crush the mains lead.

ƔDo not use any mains lead other than that provided with

this TV.

ŶTake care

Warning

ƔDo not remove covers and never modify the TV

yourself as live parts are accessible when they

are removed. There are no user serviceable

parts inside.

ƔDo not expose the TV to rain or

excessive moisture. This TV must

not be exposed to dripping or

splashing water and objects filled

with liquid, such as vases, must

not be placed on top of or above

the TV.

ƔDo not insert foreign objects into the TV through the air

vents.

ƔDo not use an unapproved pedestal / mounting equipment.

Be sure to ask your local Panasonic dealer to perform the

setup or installation of approved wall-hanging brackets.

ƔDo not apply strong force or impact to the display panel.

ƔDo not place the TV on sloped or

unstable surfaces, and ensure that

the TV does not hang over the edge

of the base.

ƔThis TV is designed for table-top use.

ƔDo not expose the TV to direct

sunlight and other sources of heat.

To prevent the spread of

fire, keep candles or other

open flames away from

this product at all times

ŶDangerous part / Small object

Warning

ƔThis product contains possibly dangerous parts such as

plastic bags, that can be breathed in or swallowed by

young children accidentally. Keep these parts out of reach

of young children.

ŶPedestal

Warning

ƔDo not disassemble or modify the pedestal.

Caution

ƔDo not use any pedestal other than the one provided with

this TV.

ƔDo not use the pedestal if it becomes warped or physically

damaged. If this occurs, contact your nearest Panasonic

dealer immediately.

ƔDuring setup, make sure that all screws are securely

tightened.

ƔEnsure that the TV does not suffer any impact during

installation of the pedestal.

ƔEnsure that children do not climb onto the pedestal.

ƔInstall or remove the TV from the pedestal with at least two

people.

ƔInstall or remove the TV by the specified procedure.

ŶVentilation

Caution

Allow sufficient space around the TV in order to help prevent

excessive heat, which could lead to early failure of some

electronic components.

Minimum distance (cm)

10 10

ƔVentilation should not be impeded

by covering the ventilation openings

with items such as newspapers,

tablecloths and curtains.

ƔWhether you are using a pedestal or not, always ensure

the vents at the bottom of the TV are not blocked and

there is sufficient space to enable adequate ventilation.

ŶMoving the TV

Caution

Before moving the TV, disconnect all cables.

ƔMove the TV with at least two

people. Support as shown to

avoid injury by the TV tipping

or falling.

ŶWhen not in use for a long time

Caution

This TV will still consume some power even in the Off mode,

as long as the mains plug is still connected to a live socket

outlet.

ƔRemove the mains plug from the wall socket when the TV

is not in use for a prolonged period of time.

ŶUse conditions

Caution

ƔThis appliance is intended for use in tropical climates.

ŶBattery for the Remote Control

Caution

ƔIncorrect installation may cause battery leakage, corrosion

and explosion.

ƔReplace only with the same or equivalent type.

ƔDo not mix old and new batteries.

ƔDo not mix different battery types (such as alkaline and

manganese batteries).

ƔDo not use rechargeable batteries (Ni-Cd, etc.).

ƔDo not burn or break up batteries.

ƔDo not expose batteries to excessive heat such as

sunshine, fire or the like.

ƔMake sure you dispose of batteries correctly.

Setting Up the TV

Standard accessories

Accessories may not be placed all together. Take care not to

throw them away unintentionally.

Remote Control

ƔN2QAYB000823

Batteries (R6) × 2

(p. 3)

Mains Lead (p. 5)

ƔTH-L24XM6K/X ƔTH-L24XM6M

Pedestal

ƔAssembly screws

(M4 × 12) × 2

Attaching the pedestal

Attach the TV to the pedestal

Carry out the work on a horizontal and level surface.

Secure the base to prevent the TV from falling over.

ƔThe place where the base is secured should be thick

enough and made of hard material.

Commercially available screw

(not supplied)

Diameter: 3 mm

Length: 25 - 30 mm

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when

using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws from the TV.

2 Pull out the pedestal from the TV.

3 Remove the assembly screws from the bracket.

Inserting remote’s batteries

Note the correct

polarity (+ or -)

Press the hook and

lift the cover

Optional accessories

Wall-hanging bracket (not supplied)

Please contact your local Panasonic dealer to purchase

the recommended optional accessories.

Rear of the TV

Screw for fixing the TV onto the

wall-hanging bracket (not supplied)

Depth of

screw

(View from the side)

ŶHoles for wall-hanging bracket installation

a: 100 mm

b: 100 mm

ŶScrew specification

Type: M4

Depth of screw:

Minimum: 6 mm

Maximum: 9 mm

Warning

ƔWhen optional accessories such as wall brackets etc.

are used, always read and follow the manufactures

installation and usage instructions.

ƔDo not mount the unit directly below ceiling lights (such

as spotlights or halogen lights) which typically give off

high heat. Doing so may warp or damage plastic cabinet

parts.

ƔWhen installing wall brackets you must ensure the

wall bracket is not electrically grounded to metal wall

studs. Always ensure that there are no electrical cables,

pipes etc. in the wall before you begin the wall bracket

installation.

ƔTo prevent fall and injury, remove the TV from its fixed

wall position when it is no longer in use.

Connecting the TV

ƔExternal equipment and cables shown are not supplied

with this TV.

ƔEnsure that the unit is disconnected from the mains

socket before attaching or disconnecting any leads.

ƔCheck the type of terminals and cable plugs are correct

when connecting.

ƔWhen using an HDMI cable, use the fully wired one.

ƔKeep the TV away from electronic equipment (video

equipment, etc.) or equipment with an infrared sensor.

Otherwise, distortion of image / sound may occur or

operation of other equipment may be interfered.

ƔAlso read the manual of the equipment being connected.

Terminals

ANALOG AUDIO

via AV1

Rear of the TV

1HDMI 1 - 2

2AV1 IN

3AV2 IN

4USB port

5Aerial terminal

6AUDIO OUT

Connections

Aerial and mains lead

ANT

DVD Recorder /

VCR

RF cable

Mains lead

(supplied)

Aerial

Alternative connection

ƔKeep the space between the TV and RF cable to prevent

distorted image.

ƔDo not put the RF cable close to the mains lead to avoid

noise.

ƔDo not place the RF cable under the TV.

ƔAn aerial, correct cable (75 ȍ coaxial) and correct

terminating plug are required to obtain optimum quality

picture and sound.

ƔIf a communal aerial system is used, you may require the

correct connection cable and plug between the wall aerial

socket and the TV.

ƔYour local Television Service Centre or dealer may be able

to assist you in obtaining the correct aerial system for your

particular area and the accessories required.

ƔAny matters regarding aerial installation, upgrading of

existing systems or accessories required, and the costs

incurred, are the responsibility of you, the customer.

ƔIf the aerial is placed in the wrong location, interference

might happen.

Set top box

HDMI cable

Satellite dish

AV / Game equipment

Ŷ Using HDMI terminal

HDMI cable Equipment

ƔYou can also make similar connection via HDMI 2.

ŶUsing COMPONENT terminals

Equipment

Audio cable

Component

video cable

ŶUsing COMPOSITE terminals

Equipment

Audio cable

Video cable

ƔYou can also make similar connections via AV2 IN.

Speaker system

AUDIO

OUT

R L

Audio cable

Amplifier with

speaker system

Initial Setup

When you first turn on the TV, a series of steps will pop-up

to guide you to setup your TV.

ƔThese steps are not necessary if the setup has been

completed by your local dealer.

1 Plug the mains plug into the socket

outlet, then switch on the TV

TH-L24XM6K: AC Single

220 - 240 V, 50/60 Hz

Other models: AC Auto

110 - 240 V, 50/60 Hz

2 Select your language

English

OSD Language

Store

Select

3 Select your area

Channel Plan

Asia/W.Europe

CIS/E.Europe

China

Hong Kong

NZ/Indonesia

CATV/Other 

When selecting [CATV/Other], press OK, and then select

the Channel Plan from [Indian CATV], [South Africa],

[American System], [American CATV] or [Japan].

4 Start Auto Tuning

Auto Tuning starts

ƔAuto Tuning searches and stores TV channels. The sorted

channel order depends on the TV signal, the broadcasting

system and reception conditions.

5 Select [Home]

Please select your viewing environment.

Home Shop

Confirm

Change

Ɣ[Shop] is for shop display. If you selected [Shop], you

can return to the above screen at the stage of Shop

confirmation screen.

Shop

You have selected shop mode

RETURN

ƔTo change the viewing environment later on, you need

to initialise all settings by accessing [Shipping Condition]

(p. 11).

Setup is now complete and your TV is ready for

viewing.

Operating the TV

Using the remote control

MEDIA

PLAYER

PICTURE

OFF TIMER

EXIT

POWER

INFO

RETURN

OPTION

INPUT

R G Y B

ASPECT

MUTE

STILL

LAST VIEW

VOL

1 13

1 Switches the TV On / Standby

2MEDIA PLAYER (p. 8)

3 Displays [Main Menu] (p. 9)

4 Selects picture mode [Viewing Mode] (p. 9)

ƔPress repeatedly to select.

5 Displays Information banner

6 OK

ƔConfirms selections.

ƔPress after selecting channel positions to quickly

change channel.

7 Displays [Option Menu]

ƔShortcuts to some setting menus for picture, sound,

etc.

ƔFollow the operation guide to select / change the

settings.

8 Coloured buttons

ƔPerforms multiple operations which correspond to

the operation guide displayed on the menu screen.

9 Volume Up / Down

10 Sound Mute On / Off

11 Numeric buttons

ƔChanges channel.

ƔWhen in Standby mode, switches TV On.

12 Freezes / unfreezes picture

13 Input mode selection

ƔTV - switches to TV input mode

ƔAV - displays [Input Selection] screen (p. 7) or

press repeatedly to select the AV input mode

14 OFF TIMER

ƔPress repeatedy to select the period after which the

TV will turn to Standby mode automatically.

[0] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)

15 Changes multiplex sound mode (if available)

Sound mode indicator:

: STEREO : MAIN I

: MONO : SUB II

16 Exits to the TV viewing screen

17 Cursor buttons

ƔMakes selections or adjustments.

18 Returns to the previous menu / page

19 ASPECT

ƔDisplays the [Aspect Selection] screen. Follow the

operation guide to select the mode.

[16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] /

[Zoom2] / [Zoom3] (p. 12)

ƔYou can also press the button repeatedly to select

the mode.

20 Channel Up / Down

21 Returns to the last viewed channel

About operation guide

When operating the TV with the remote control, follow the

operation guide available at the bottom of the screen to

perform the operation you want.

Example: [Aspect Selection]

Aspect Selection

16:9

14:9

Just

Select EXIT

RETURN

Change Operation guide

Referring to the operation guide:

ƔTo select the mode

ƔTo change to the selected mode

ƔTo return to the previous menu

RETURN

ƔTo exit the menu

EXIT

Using the TV controls

INPUT

VOL

HOLD

for

Indicators on the TV

5 6 7

1 Displays [Input Selection] screen

ƔOn first press, the [Input Selection] screen for

control panel is displayed. Pressing the button again

will toggle cursor movement.

Displays [Main Menu] when press and hold for

3 seconds

Confirms selection (OK button) while in the menu

system

2 Channel Up / Down

Cursor Up / Down

ƔMakes selections or adjustments when in the menu

system

3 Volume Up / Down

Cursor Left / Right

ƔMakes selections or adjustments when in the menu

system

4 Switches TV On or Standby

ƔTo completely turn Off the TV, remove the mains

plug from the wall socket.

5 Remote control signal receiver

6 C.A.T.S. (Contrast Automatic Tracking System)

sensor

ƔSenses brightness to adjust picture quality when

[Eco Mode] in the Picture Menu is set to [On].

(p. 10)

7 Power LED

ƔRed: Standby

Green: On

Watching External

Inputs

Connect the external equipment (p. 5),

then select the input corresponds to the

connected terminal.

Input Selection

AV1

AV2

HDMI 1

HDMI 2

USB

Note

Ɣ[USB] : Switches to Media Player (p. 8)

ƔYou can label or skip each input mode (except [USB]).

“Input Labels” (p. 11)

Skipped inputs will not be displayed when the AV button

is pressed.

F0313-1033

Printed in Malaysia

Web Site: http://panasonic.net

Panasonic does not guarantee operation and

performance of peripheral devices made by other

manufacturers; and we disclaim any liability or damage

arising from operation and/or performance from usage

of such other maker’s peripheral devices.

The recording and playback of content on this or any

other device may require permission from the owner

of the copyright or other such rights in that content.

Panasonic has no authority to and does not grant

you that permission and explicitly disclaims any right,

ability or intention to obtain such permission on your

behalf. It is your responsibility to ensure that your use

of this or any other device complies with applicable

that legislation for more information on the relevant

laws and regulations involved or contact the owner

of the rights in the content you wish to record or

playback.

Panasonic and its affiliates make no representations or

warranties of any kind with respect to the USB devices

and the performance of communication between the

USB devices and the USB port of Panasonic products,

and expressly disclaims any and all warranties,

whether express or implied or otherwise, including

without limitation any implied warranty of fitness for a

particular purpose, any loss of data, and any implied

warranties arising from course of dealing or course of

performance of data communication between the USB

devices and the USB port of Panasonic products.

This product is licensed under the AVC patent portfolio

license for the personal and non-commercial use of a

consumer to (i) encode video in compliance with the

AVC Standard (“AVC Video”) and/or (ii) decode AVC

Video that was encoded by a consumer engaged in

a personal and non-commercial activity and/or was

obtained from a video provider licensed to provide AVC

Video. No license is granted or shall be implied for any

other use. Additional information may be obtained from

MPEG LA, LLC.

See http://www.mpegla.com.

Information on Disposal in other Countries

outside the European Union

This symbol is only valid in the European

Union. If you wish to discard this product,

please contact your local authorities or

dealer and ask for the correct method of

disposal.

Customer’s Record

The model number and serial number of this product

may be found on its rear panel. You should note this

serial number in the space provided below and retain

this book, plus your purchase receipt, as a permanent

record of your purchase to aid in identification in

the event of theft or loss, and for Warranty Service

purposes.

Model Number

Serial Number

Model No.

TH-L24XM6K

TH-L24XM6M

TH-L24XM6X

English

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this

product and retain them for future reference.

The images shown in this manual are for illustrative

purposes only.

Some illustrations are presented as conceptual images and

may be different from the actual products.

Illustrations shown may be different between models and

countries.

Transport only in upright position

CJA

TQB4GC1041-1

Operating Instructions

LED TV

Contents

Safety Precautions ··················· 2

Setting Up the TV ····················· 3

Connecting the TV ···················· 4

Initial Setup ····························· 6

Operating the TV ······················ 6

Watching External Inputs ··········· 7

Using the Media Player ············· 8

Using the Menu Functions ·········· 9

Additional Information ············· 12

Troubleshooting ····················· 13

Specifications ························ 14

Maintenance ························· 15

Licence ································ 15

Using the Media Player

Media Player allows you to enjoy photo, music or video

recorded on a USB Flash Memory.

ƔThe picture may not appear correctly on this TV

depending on the digital cameras used.

ƔDisplay may take some time when there are many files

and folders in the USB Flash Memory.

ƔPartly degraded files might be displayed at a reduced

resolution.

ƔThe folder and file names may be different depending on

the digital camera used.

1 Insert the USB Flash Memory

ƔInsert or remove

straightly and completely.

2 Start Media Player

MEDIA

PLAYER

3 Select the mode

MovieMusicPhoto

Contents Select

USB

EXIT

Select

RETURN

Access

[Photo]: Displays the thumbnail of all photos in the

USB device.

[Music]: Displays the thumbnail of music folders in the

USB device.

[Movie]: Displays the thumbnail of video titles in the

USB device.

[Contents Select]

Switching between modes

When you are in the thumbnail view of any mode, you

change to the other mode by returning to the [Contents

Select] screen.

Photo mode

EXIT

Select RETURN

Slideshow View Select Drive Select Contents Select

Info

View

Option Menu

USB

Media Player Photo All photos

Operation guide

: Error display

Follow the operation guide to perform available

operations in Photo mode.

To display / hide the operation guide during

[Single View] and [Slideshow]

INFO

[View]

Enters Single view mode to view photo one at a time

[Slideshow]

Lets you view all photos in the slideshow mode

[View Select]

Lets you toggle between thumbnail view and folder view.

[Option Menu]

Contains [Slideshow Settings] menus to set up slideshow.

Ŷ[Transition Effect]

Effect for photo switching during slideshow

[None] / [Dissolve] / [Wipe right] / [Wipe left] /

[Wipe up] / [Wipe down] / [Box out] / [Random]

Ŷ[Screen Mode]

Screen mode for Single view and Slideshow

[Normal] / [Zoom]

–Depending on the photo size, it may not be fully

enlarged to ¿ ll the screen, e.g. portrait style picture.

Ŷ[Interval]

Slideshow interval [5] / [10] / [15] / [30] / [60] / [90] /

[120] (seconds)

Ŷ[Repeat]

Slideshow repeat [Off] / [On]

Ŷ[Back Ground Music]

Background music during photo viewing

[Off] / [Type1] / [Type2] / [Type3]

Note

ƔPicture quality may suffer depending on the slideshow

settings.

ƔPicture setting may not work depending on the slideshow

settings.

Music mode

My Music_1 My Music_2 My Music_3

Media Player Music Folder view

USB

EXIT

Select RETURN

Play Folder Contents Select

Info

Access

Option Menu

Drive Select

Operation guide

Follow the operation guide to perform available

operations in Music mode.

To display / hide the operation guide during

playback

INFO

To playback all music in the selected folder

To playback the selected file only

Select the folder Select the file Play

OK OK

[Option Menu]

Contains [Music Setup Menu] to set up play mode.

Ŷ[Repeat]

[Folder]: Playback repeat within the selected folder

[One]: Playback repeat on the selected one file

[Off]: Playback repeat off

Movie mode

OPTION

Title view Media Player Movie

Trip1

Nature2

2010_9

Trip2

Nature3

Trip3

Nature4

Trip4

Nature5

Trip5

Nature6

Room

2010_4

Nature1

2010_7

USB

EXIT

Select RETURN

Play Folder Contents Select

Info

Access

Option Menu

Drive Select

Operation guide

: Error display

Follow the operation guide to perform available

operations in Movie mode.

To display / hide the operation guide and

information banner during playback

INFO

To playback all movies in the selected title folder

To playback the selected file in the title folder

Select the title Select the file Play

OK OK

[Option Menu]

Contains [Video Setup Menu] to set up Movie mode.

While in thumbnail view:

Ŷ[Repeat]

Playback repeat within the title [Off] / [On]

–Only the selected folder will be repeated.

During movie playback:

Ŷ[Multi Audio]

Selects the sound tracks (if available)

Ŷ[Subtitle]

Selects the subtitle (if available)

[Off] / [Subtitle1] (/ [Subtitle2] ...)

Ŷ[Aspect Change]

[16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] /

[Zoom2] / [Zoom3]

–You can also change the aspect using the ASPECT

button.

Using the Menu

Functions

1 Display the menu

2 Select the menu

Main Menu

Picture

Sound

Setup

3 Select the item you want, then change /

adjust or access

Example:

1/2

Picture Menu

Viewing Mode

Backlight 100

Contrast 50

Brightness 0

Colour 50

Dynamic

Select

ƔChange the setting option

Viewing Mode Dynamic

Change /

adjust

ƔAdjust the intensity bar

Contrast 50

ƔAccess the submenu

Child Lock Access

Access

Note

ƔA different menu will be displayed in the mode of Media

Player (p. 8 - 9).

ƔOnly available items can be selected.

Picture Menu

[ Viewing Mode]

Sets preset picture mode for each input.

[Dynamic]: Improves contrast and sharpness.

[Normal]: For viewing in a normal lighting condition.

[Cinema]: Improves the performance of contrast, black

and colour reproduction.

[True Cinema]: Reproduces the original image quality

precisely without any revision.

[Game]: For viewing when playing games

–Not valid on TV mode.

–To display a continuous record of time spent using

Game mode [Playing Time Display] (p. 11).

In each Viewing Mode, [Contrast], [Brightness], [Colour],

[Sharpness], [Tint], [Colour Balance], [Eco Mode], [P-NR]

and [3D-COMB] can be adjusted and stored for each input.

[Backlight] / [Contrast] / [Brightness] / [Colour] /

[Sharpness]

Adjusts the levels of these options to your preference.

[Balance]

Adjusts volume level of right and left speakers

[ Surround]

Surround sound settings [Off] / [On]

[Auto Gain Control]

Automatically regulates large sound level differences

between channels and inputs [Off] / [On]

[ Volume Correction]

Adjusts the volume of individual channel or input mode

[Speaker Distance to Wall]

Compensates for the low frequency sound due to the

distance between the speakers and the wall

[Over 30cm] / [Up to 30cm]

ƔIf the back space between the TV and wall is over 30 cm,

[Over 30cm] is recommended.

ƔIf the back space between the TV and wall is within 30 cm,

[Up to 30cm] is recommended.

[ MPX]

Selects multiplex sound mode (if available)

[Stereo]: Use this normally

[Mono]: When stereo signal cannot be received

[M1] / [M2]: Available while mono signal is transmitted

[HDMI1/2 Input]

Selects to fit the input signal (p. 12)

[Digital]: When sound is carried via the HDMI cable

connection

[Analogue]: When sound is not carried via the HDMI-DVI

adaptor cable connection

ƔFor HDMI input

[Reset to Defaults]

Press OK to reset the present settings of [Mode], [Balance]

and [Surround] to the default.

Setup Menu

[Off Timer]

Sets the time until the TV automatically goes to Standby

mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)

[Child Lock]

Locks channels / AV input modes

Enter the PIN number (4 digits) to access.

First setting:

On the [Child Lock-PIN Entry] screen, enter your preferred

number twice to create the PIN.

Ŷ[Change PIN]

Lets you change your PIN number.

–Enter a new PIN number twice.

–Performing [Shipping Condition] erases the PIN number

and all settings.

Ŷ[Child Lock List]

Displays the Child Lock List.

–From the list, selects the channel / input to be locked.

[Tuning Menu]

(p. 11)

[OSD Language]

Changes language for on-screen displays (p. 6)

[Tint]

Adjusts the picture hue.

ƔFor NTSC signal, Component or HDMI input

[Colour Balance]

Sets the overall colour tone of the picture.

[Cool] / [Normal] / [Warm]

ƔNot valid when [Viewing Mode] is set to [True Cinema]

[Channel Colour Set]

Adjusts the suitable colour density from 3 levels for each

channel.

ƔSelect the channel to adjust and set this function.

[ Eco Mode]

Automatic Brightness Control function

Adjusts picture settings automatically depending on ambient

lighting conditions [Off] / [On]

[P-NR] (Picture Noise Reduction)

Reduces unwanted picture noise and flicker noise in the

contoured parts of a picture [Off] / [Min] / [Mid] / [Max]

[3D-COMB]

Makes still or slow moving pictures more vivid [Off] / [On]

ƔOccasionally, while viewing still or slow moving pictures,

colour patterning may be seen. Set to [On] to display

sharper and more accurate colours.

ƔFor PAL or NTSC signal reception only.

ƔNot valid on Component, HDMI and Media Player.

[Reset to Defaults]

Press OK to reset the present picture [Viewing Mode] of the

selected input to the default settings.

Sound Menu

[Mode]

Sets preset sound mode. The selected mode affects all

input signals.

[Music]: Improves sound quality for watching music

videos, etc.

[Speech] : Improves sound quality for watching news,

drama, etc.

[User]: Adjusts the sounds manually by using the

equaliser

–For the User mode, [Equaliser] will appear on the Sound

Menu instead of [Bass] and [Treble]. Select [Equaliser]

and adjust the frequency (below).

In Music and Speech modes, you can adjust [Bass] and

[Treble] settings, and those settings will be stored for

each mode.

[Bass] / [Treble]

Adjusts the effect to your preference.

[Equaliser]

Select the frequency and change the frequency level by

using the cursor buttons.

ƔThis function is available when [Mode] is set to [User].

ƔTo enhance the bass sound, raise the level of the lower

frequency. To enhance the treble sound, raise the level of

the higher frequency.

ƔTo reset the levels of each frequency to the default

settings, select [Reset to Defaults] by using the cursor

button, and then press the OK button.

[Display Settings]

Ŷ [Input Labels]

Accesses the input labels list to select the label of each

input mode or set to skip unconnected one for easier

identification and selection in [Input Selection] (p. 7)

or banner

–To skip the input mode, select [Skip].

Ŷ[Banner Display Timeout]

Sets how long the Information banner stays on screen

(p. 6) [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] /

[7] / [8] / [9] / [10] (seconds)]

Ŷ [Playing Time Display]

Set to [On] to display a continuous record of time spent

using Game mode every 30 minutes [Off] / [On]

–This function is available when [Viewing Mode] is set

to [Game].

[System Menu]

Ŷ [Shipping Condition]

Resets all settings to the original condition.

–Access this function and follow the on-screen

instructions to complete the procedures.

–Initial Setup will automatically start after [Shipping

Condition] completes .(p. 6)

Ŷ[Software Licence]

Displays the software licence information of the TV.

Ŷ[System Information]

Displays the system information of the TV.

[Other Settings]

Ŷ[Colour System]

Selects optimum colour system based on video signals in

AV mode [Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]

Ŷ[Colour Matrix]

Adjusts suitable colour parameters for [SD] (standard

definition) or [HD] (high definition)

–[SD]: Input signal is a normal TV system

–[HD]: Input signal is a high de¿ nition system

• Available only with 480p or 576p input on video

signals in a natural colour from digital equipment

connected to AV1 component or HDMI1 / HDMI2

terminals.

Ŷ [Auto Standby]

Sets the duration of time that the TV will remain on when

no operation is performed [Off] / [2] / [4] (hours)

–Automatic input switching with the connected

equipment affects this function and time-count will be

reset.

–The noti¿ cation message will appear 3 minutes before

going into Standby mode.

Ŷ[Power Save]

Reduces brightness of picture to economise on power

consumption [Off] / [On]

Ŷ[16:9 Overscan]

Selects the screen area displaying the image

–[On]: Enlarges the image to hide the edge of the

image.

–[Off]: Displays the image in the original size.

• Set to [On] if noise is generated on the edge of the

screen.

• This function is available when aspect is set to [16:9].

• This function can be memorised separately for SD

(Standard definition) and HD (High definition) signals.

Using the [Tuning Menu]

[Tuning Menu] lets you retune your TV, skip unwanted

channels, etc.

TV mode only

[Channel List Edit]

Hides unwanted channels. The hidden channels cannot be

displayed except in this function.

Select a channel, then reveal / hide

Channel List Editor

: [reveal]

: [hide] (skip)

Ŷ[Tune]

Retunes each channel (Manual Tuning).

Ŷ[Reveal all]

Reveals all hidden channels.

[Auto Tuning]

Scans and stores all channels automatically.

Auto Tuning

All tuning data will be erased

Start Auto Tuning EXIT

RETURN

ƔIf tuning has not been done completely

[Manual Tuning] (below)

[Manual Tuning]

Scans and stores channels manually.

Fine Tuning

Manual Tuning

Sound System

Colour System

CH57

B/G

Auto

Manual Tuning

0% 100%

1 Set [Sound System] and [Colour System].

• Normally set [Colour System] to [Auto].

2 Select a channel position to store the channel.

• If a VCR is connected only with the RF cable, select

channel position [0].

3 Start tuning.

• Tuning stops when a channel is found.

4 Press OK to store the channel or press the cursor

button to continue tuning.

Ŷ[Fine Tuning]

Refines the tuning of a channel.

Additional Information

Auto power standby function

The TV will automatically go into Standby mode in the

following conditions:

ƔNo signal is received and no operation is performed for

30 minutes in Analogue TV mode.

Ɣ[Off Timer] is active in the Setup Menu.

ƔNo operation is performed for the period selected in [Auto

Standby] (p. 11).

Aspect

Ŷ[16:9]

Directly displays the image at 16:9

without distortion (anamorphic).

Ŷ[14:9]

Displays the image at the standard 14:9

without distortion.

Ŷ[Just]

Displays a 4:3 image full-screen.

Stretching is only noticeable at the left

and right edges.

Ŷ[4:3]

Displays the image at the standard 4:3

without distortion.

Ŷ[4:3 Full]

Displays a 4:3 image enlarged

horizontally to fit the screen.

ƔHD signal only

Ŷ[Zoom1]

Displays a 16:9 letterbox or 4:3 image

without distortion.

Ŷ[Zoom2]

Displays a 16:9 letterbox (anamorphic)

image full-screen without distortion.

Ŷ[Zoom3]

Displays a 2.35:1 letterbox (anamorphic)

image full-screen without distortion.

At 16:9, displays the image at its

maximum (with slight enlargement).

Input signal that can be displayed

Signal name COMPONENT HDMI

525 (480) / 60i, 60p

625 (576) / 50i, 50p

750 (720) / 60p, 50p

1,125 (1,080) / 60i, 50i

1,125 (1,080) / 60p, 50p, 24p

Mark : Applicable input signal

ƔSignals other than above may not be displayed properly.

ƔThe above signals are reformatted for optimal viewing on

your display.

Supported file format in Media Player

ŶPhoto:

JPEG (.jpg, .jpeg)

–Supported image resolution: 8 × 8 to 30,719 × 17,279

–DCF and EXIF standards

–Sub-sampling: 4:4:4, 4:2:2, 4:2:0

–Progressive JPEG is not supported.

ŶMusic:

MP3 (.mp3) / AAC (.m4a)/ WMA (.wma)



ŶVideo

AVI (.avi) / MKV (.mkv)/

ASF (.asf, .wmv) /

MP4 (.mp4, .m4v) / FLV (.flv) / 3GPP (.3gp, .3g2) /

TS (.ts) / PS (.vob, .vro) / RMVB



Copy-protected files cannot be played back.

WMA Pro and WMA Lossless are not supported.

RMVB files are only supported by TH-L24XM6K model.

Note

ƔEven if these conditions are fullfilled, some files may not

be played back depending on how they are encoded.

ƔDo not use two-byte characters or other special codes

for data.

ƔThe device may become unusable with this TV if the file

or folder names are changed.

HDMI connection

This TV incorporates HDMI™ technology. HDMI (high-

definition multimedia interface) is the world’s first complete

digital consumer AV interface complying with a non-

compression standard.

HDMI allows you to enjoy high-definition digital images

and high-quality sound by connecting the TV and the

equipment.

ŶApplicable HDMI features

ƔInput audio signal:

2ch Linear PCM (sampling frequencies - 48 kHz, 44.1

kHz, 32 kHz)

ƔInput video signal:

“Input signal that can be displayed” (p. 12)

Match the output setting of the digital equipment.

Ŷ DVI connection

If the external equipment has only a DVI output, connect to

the HDMI terminal via a DVI to HDMI adaptor cable. When

the DVI to HDMI adaptor cable is used, connect the audio

cable to the audio input terminal (use AV1 audio terminals).

Note

ƔAudio settings can be made on [HDMI1 / 2 Input] in the

Sound Menu (p. 10).

ƔThese HDMI connectors are “type A”.

ƔThese HDMI connectors are compatible with HDCP

(High-Bandwidth Digital Content Protection) copyright

protection.

ƔEquipment having no digital output terminal may be

connected to the input terminal of component or video to

receive analogue signals.

USB Flash Memory

For playing back in Media Player

Format: FAT16, FAT32

Compliance:

Supports only USB1.1 or USB2.0 standard.

Maximum USB capacity supported is 16GB.

USB Hub or card adapter is not supported.

Note

ƔData modified with a PC may not be displayed.

ƔDo not remove the device while the TV is accessing data.

Otherwise this can damage the device or TV.

ƔDo not touch the pins on the device.

ƔInsert the device in the correct direction. Otherwise this

can damage device or TV.

ƔElectrical interference, static electricity, or erroneous

operation may damage the data or device. Panasonic is

not liable for any deterioration or damage of data or device

during operations with the TV.

ƔIt is recommended to connect the USB Flash Memory

directly to the TV’s USB port.

ƔSome USB devices or USB HUB may not be used with

this TV.

ƔYou cannot connect any devices by using USB card

reader.

ƔAdditional information for USB devices may be on the

following website. (English only)

http://panasonic.jp/support/global/cs/tv/

Troubleshooting

Before requesting service or assistance, please follow these

simple guides to resolve the problem.

If an error message appears, follow the message’s

instructions.

If the problem still persists, please contact your local

Panasonic dealer for assistance.

Screen

Red, blue, green or black spots on the screen

ÎThis is the characteristic of liquid crystal panels. The

liquid crystal panel is built with very high precision

technology. Occasionally, a few non-active pixels may

appear on the screen as points of red, green, blue or

black. This does not affect the performance of your TV

and it is not a quality problem.

Chaotic image, noisy

ÎSet [P-NR] in the Picture Menu to remove noise

(p. 10).

ÎCheck nearby electrical products (car, motorcycle,

fluorescent lamp).

No image is displayed

ÎCheck the settings of [Contrast], [Brightness] or [Colour]

in the Picture Menu (p. 9).

ÎCheck the TV is in AV mode. If the TV is in AV mode,

check the selected input mode match the output of the

external equipment (p. 7).

Blurry or distorted image

(no sound or low volume)

ÎResets channels [Auto Tuning] or [Manual Tuning]

(p. 11)

Unusual image is displayed

ÎTurn the TV off with Mains power On / Off switch, then

turn it on again. If the problem persists, initialise all

settings [Shipping Condition] (p. 11)

Pictures from equipment connected via HDMI

are unusual

ÎCheck the HDMI cable is connected properly.

ÎTurn the TV and equipment off, then turn them on

again.

ÎCheck an input signal from the equipment (p. 12).

ÎUse equipment compliant with EIA/CEA-861/861D.

Sound

No sound is produced

ÎCheck the sound mute setting (p. 6) and volume.

Low level or distorted sound

ÎSound signal reception may be deteriorated.

ÎSet [MPX] (p. 10) in the Sound Menu to [Mono].

Sound output via HDMI connection is unusual

ÎSet the sound setting of the connected equipment to

“2ch L.PCM”.

ÎCheck the [HDMI1 / 2 Input] setting in the Sound Menu

(p. 10).

ÎIf digital sound connection has a problem, select

analogue sound connection (p. 12).

General

The TV goes into Standby mode

ÎThis TV is equipped with auto power standby function

(p. 12)

The remote control does not work or is

intermittent

ÎReplace the batteries (p. 3).

ÎPoint the remote control directly at the remote control

signal receiver of the TV (within about 7 m and 30

degree angle).

ÎSituate the TV away from sunshine or block sources

of bright light from shining on the remote control signal

receiver of the TV.

Parts of the TV become hot

ÎEven if the temperature of parts of the front, top and

rear panels has risen, these temperature rises do not

cause any problems in terms of performance or quality.

The LCD panel moves slightly when it is

pushed with a finger

Clattered sound might be heard

ÎThere is some flexibility around the panel to prevent

damage. This is not a malfunction.

Overcurrent error message appears

ÎThe connected USB device might cause this error.

Remove the device and turn the TV off with Mains

power On / Off switch, then turn it on again.

ÎCheck foreign objects are not inside the USB port.

Specifications

Model No. TH-L24XM6K TH-L24XM6M

TH-L24XM6X

Power source AC Single 220 - 240 V, 50/60 Hz AC Auto 110 - 240 V, 50/60 Hz

Power consumption

Power rating 41 W

Standby Condition 0.3 W

Display panel

Panel TFT LCD Module with LED Backlight

Visible screen size

(diagonal) 61 cm (24 inches)

Number of pixels 1,049,088 (1,366 (W) × 768 (H))

Sound

Speaker (100 mm × 30 mm) × 2 pcs, 8 

Audio output 6 W (3 W + 3 W), 10% THD

Dimensions (W × H × D)

With Pedestal (mm) 576 × 416 × 180

TV only (mm) 576 × 351 × 59

Mass (Net)

With Pedestal (kg) 5.0

TV only (kg) 4.5

Aerial - Rear VHF / UHF

Receiving systems / Band name

17 Systems Function 17 Systems Function

1 PAL B, G, H

Reception of broadcast

transmissions and Playback from

Video Cassette Tape Recorders

8 NTSC 4.43/5.5 MHz

Playback from Special VCR’s

or DVD

2 PAL I 9 NTSC 4.43/6.0 MHz

3 PAL D, K 10 NTSC 4.43/6.5 MHz

4 SECAM B, G 11 NTSC 3.58/5.5 MHz

5 SECAM D, K 12 NTSC 3.58/6.0 MHz

6 SECAM K1 13 NTSC 3.58/6.5 MHz

7 NTSC M (NTSC 3.58/4.5 MHz) 14 SECAM I

15 PAL 60 Hz/5.5 MHz Playback from Special Disc

Players and Special VCR’s or

DVD

16 PAL 60 Hz/6.0 MHz

17 PAL 60 Hz/6.5 MHz

Receiving channels

VHF BAND

2-12 (PAL/SECAM B, K1)

0-12 (PAL B AUST.)

1-9 (PAL B N.Z.)

1-12 (PAL/SECAM D)

1-12 (NTSC M Japan)

2-13 (NTSC M USA)

UHF BAND

21-69 (PAL G, H, I/SECAM G, K, K1)

28-69 (PAL B AUST.)

13-57 (PAL D, K)

13-62 (NTSC M Japan)

14-69 (NTSC M USA)

CATV

S1-S20 (OSCAR)

1-125 (USA CATV)

C13-C49 (JAPAN)

S21-S41 (HYPER)

Z1-Z37 (CHINA)

5A, 9A (AUST.)

Operating Conditions Temperature : 0 °C - 40 °C,

Humidity : 20 % - 80 % RH (non-condensing)

Connection terminals

AV1 IN AUDIO L - R RCA PIN Type × 2 0.5 V[rms]

VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 ȍ)

COMPONENT Y 1.0 V[p-p] (including synchronization)

PB B R R/C , P /C ±0.35 V[p-p]

AV2 IN AUDIO L - R RCA PIN Type × 2 0.5 V[rms]

VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 ȍ)

AUDIO OUT AUDIO L - R RCA PIN Type × 2 0.5 V[rms]

HDMI AV IN TYPE A Connectors × 2

USB USB 2.0 TYPE A Connectors × 1 DC 5 V, Max. 500 mA

Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

Maintenance

First, remove the mains plug from the socket

outlet.

Regular care

ƔGently wipe the surface of the display panel, cabinet and

pedestal by using a soft cloth.

ƔWipe the mains plug with a dry cloth at regular intervals.

Moisture and dust may lead to fire or electrical shock.

For stubborn dirt

First clean the dust on the surface. Dampen a soft cloth

with clean water or diluted neutral detergent (1 part

detergent to 100 parts water). Wring the cloth and wipe the

surface. Finally, wipe away all the moisture.

Caution

ƔDo not use a hard cloth or rub the surface too hard as

this could scratch the surface.

ƔDo not subject the TV’s surfaces to water or detergent.

Liquid inside the TV could lead to product failure.

ƔDo not subject the surfaces to insect repellent, solvent,

thinner or other volatile substances. This may degrade

surface quality or cause peeling of the paint.

ƔThe surface of the display panel is specially treated and

may be easily damaged. Take care not to tap or scratch

the surface with your fingernail or other hard objects.

ƔDo not allow the cabinet and pedestal to make contact

with a rubber or PVC substance for a long time. This may

degrade surface quality.

Licence

This product incorporates the following software:

(1) the software licensed under the GNU General

Public License, Version 2.0 (GPL V2.0),

(2) the software licensed under the GNU LESSER

General Public License, Version 2.1 (LGPL V2.1),

and/or

(3) open sourced software other than the software

licensed under the GPL and/or LGPL.

The software categorized as (1) - (3) are distributed

in the hope that it will be useful, but WITHOUT ANY

WARRANTY, without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR

PURPOSE. Please refer to the detailed terms and

conditions thereof shown in the “Software License”

menu on this product.

At least three (3) years from delivery of this product,

Panasonic Corporation will give to any third party

who contacts us at the contact information provided

below, for a charge no more than our cost of physically

performing source code distribution, a complete

machine-readable copy of the corresponding source

code covered under GPL V2.0, LGPL V2.1 or the other

licenses with the obligation to do so, as well as the

respective copyright notice thereof.

Contact Information: cdrequest@unipf.jp

The source code and the copyright notice are also

available for free in our website below.

http://www.unipf.jp/dl/ATV13AR/

HDMI, the HDMI Logo, and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United

States and other countries.

Manufactured under

license from Dolby

Laboratories. Dolby and

the double-D symbol

are trademarks of Dolby

Laboratories.

Manufactured under license under U.S. Patent

Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.

and worldwide patents issued & pending. DTS,

the Symbol, & DTS and the Symbol together are

registered trademarks & DTS 2.0 Channel is a

trademark of DTS, Inc. Product includes software.

RealMedia, RealVideo and

RealAudio are trademarks

or registered trademarks of

RealNetworks, Inc.

These statements are under the Licence Agreement

with RealNetworks, Inc.

4.4.2.1 Terms of use must prohibit the user from

modifying, translating, reverse engineering,

decompiling, disassembling or using other means

to discover the Source Code or otherwise replicate

the functionality of the Client Code, except to the

extent that this restriction is expressly prohibited by

applicable law.

4.4.2.2 Terms of use must effectively disclaim on

behalf of Real all warranties and conditions other

than those set forth in this Agreement, express and

implied, including implied warranties or conditions

of merchantability and fitness for a particular

purpose; and effectively exclude all liability for

indirect, special, incidental and consequential

damages, including but not limited to lost profits or

replacement systems.

(Only supported by TH-L24XM6K model.)

Windows is a registered trademark of Microsoft

Corporation in the United States and other

countries.

Even if no special notation has been made of company

or product trademarks, these trademarks have been

fully respected.

Product specificaties

Merk:	Panasonic
Categorie:	Televisie
Model:	TH-L24XM6M

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic TH-L24XM6M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Televisie Panasonic

Panasonic TX-32JS360 Handleiding

21 December 2024

Panasonic TX-65HZ2000 Handleiding

21 December 2024

Panasonic TV-75W95AP Handleiding

25 November 2024

Panasonic TV-65Z95AP Handleiding

25 November 2024

Panasonic TV-65W95APK Handleiding

25 November 2024

Panasonic TV-65W95AP Handleiding

25 November 2024

Panasonic TV-55W95AP Handleiding

25 November 2024

Panasonic TV-85W95AP Handleiding

25 November 2024

Panasonic TH-55MX650V Handleiding

25 November 2024

Panasonic TH-43MX650V Handleiding

24 November 2024

Handleiding Televisie

Nieuwste handleidingen voor Televisie

Samsung UN32J4000AF Handleiding

23 December 2024

Peerless-AV XHB554 Handleiding

20 December 2024

TCL 75S551G Handleiding

18 December 2024

Toshiba 24WV2463DB Handleiding

18 December 2024

Sony Bravia K-55S30 Handleiding

18 December 2024

TCL 55S551G Handleiding

18 December 2024

TCL 75QM851G Handleiding

18 December 2024

TCL 65S551G Handleiding

18 December 2024

TCL 65QM751G Handleiding

18 December 2024

Engel LE3285SM Handleiding

18 December 2024