Panasonic RX-D20 Handleiding

Panasonic Hifi systeem RX-D20

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic RX-D20 (9 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

Before connecting, operating or adjusting

this product, please read these instructions

completely.

Please keep this manual for future reference.

Power sources

The unit can be powered with household AC power or dry cell batteries (not included).

Insert memory batteries (not included) to save stored CD programs and radio stations.

Memory back-up

Insert batteries (not included) to save CD pro-

grams and radio stations you have set. If memory

batteries are not used, memory items are erased

in the following situations:

• Power failures,

• The power cord is disconnected from the power

outlet,

• The power cord is connected to the unit while

the unit is being powered by batteries.

(R6/LR6, AA, UM-3)

When to change the batteries

The batteries last about a year.

Connect the unit to AC power before replacing

the batteries.

Removing the batteries

Press the negative end of the number 4 battery

and remove the batteries. (Remove the power

batteries first.)

User memo:

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

Using a household AC outlet

Connect the power cord firmly to the unit and the

outlet.

• Before connecting or disconnecting the cord,

stop the tape and switch [ ] to “TAPE/

” to turn the power off. The memory bat-

teries are worn out faster if the cord is discon-

nected with the power still on.

•Conserving power

The unit consumes 1W even when it is turned

off with [ ]. To save power when the

unit is not to be used for a long time, unplug it

from the household AC outlet. Remember to

reset the radio stations and any other memory

items before using the unit again if you haven’t

inserted memory batteries.

Using batteries

The unit cannot be powered by batteries if the

power cord is connected.

(R20/LR20, D, UM-1)

When to change the batteries

Sound quality and operations are affected when

the batteries are running low. Replace all six

batteries. It is also a good idea to replace all the

batteries before recording.

Removing the batteries

Open the battery cover

and insert your finger in

the hole on the bottom

of the unit and push out.

RQT6742- P1

Household AC outlet

(AC 120

V, 60

Hz)

AC power cord

(included) Inner row

Outer row

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions

carefully.

These operating instructions fundamentally explain the operation of

RX-D23.

The model number and serial number of this product can be

found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for fu-

ture reference.

MODEL NUMBER _________________________________

SERIAL NUMBER _________________________________

The illustrations show RX-D23.

Supplied accessories

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when ask-

ing for replacement parts.

(Only for U.S.A.)

To order accessories contact 1-800-332-5368 or

web site (http://www.panasonic.com).

AC power supply cord (polarized) (RJA0065-1D) .................. 1pc.

Note

The included AC power supply cord is for use with this unit only. Do

not use it with other equipment.

Remote control transmitter ..................................................... 1pc.

(EUR648257)

Portable Stereo

CD System

Operating Instructions

Model No.

RX-D23

RX-D20

P PCPL

RQT6742

TUNER

XBS

Controls

Main unit:

Remote control signal sensor (SENSOR)

Tape play button ( PLAY)

Rewind/review button ( REW/REV)

Fast-forward/cue button ( FF/CUE)

Stop/eject button ( / STOP/EJECT)

Tune mode, CD play mode select button

(TUNE MODE, CD PLAY MODE)

Speaker

XBS button

Press to boost the bass sound.

Press again to turn off.

Display

Pause button ( PAUSE)

CD lid open/close

( CD OPEN/CLOSE)

Record button ( )

Function select switch

( )

CD lid

Note

These speakers do not have magnetic shielding. Do not place

them near televisions, personal computers or other devices

easily influenced by magnetism.

Tape lid

Auto scan button (AUTO SCAN)

(For RX-D23 only)

Center speaker

Volume control

( )

CD play/pause, band

select button ( , BAND)

FM mode select/CD stop/

program clear button

( FM MODE/CLEAR)

Band select button

(BAND)

CD play mode

select button

(CD PLAY MODE)

FM mode select

button (FM MODE)

Preset channel select/

preset scan buttons

( PRESET TUNE )

Normal tuning/CD

skip, search buttons

( , )

CD play/pause button

( )

CD stop/program

clear button

( )

Tuning/CD skip, search buttons

( , TUNE/CD)

Memory button (MEMORY)

Remote control:

The functions of the buttons without descriptions are the same as on

the main unit.

Battery installation

Insert the batteries (not included)

observing the correct polarities (e d, ).

Operation notes

• Do not place obstacles between the remote control signal sensor and

the remote control unit.

• Do not expose the remote control signal sensor to direct sunlight or to

the bright light of fluorescent light.

• Take care to keep the remote control signal sensor and end of the remote

control unit free from dust.

To prevent damage

• Never place heavy items on it.

• Do not disassemble or reconstruct it.

• Do not spill water or other liquids into it.

Correct method of use

Concerning the remote control

Transmission

window

About 7 meters in front

of the signal sensor

Remote control

signal sensor

R6, AA, UM-3

RQT6742

1Switch [ ] to “TUNER”.

(Power comes on.)

2Press [BAND] to select “FM” or “AM”.

3(Omit this step if using the remote control)

If “ ” is on the display, press

[TUNE MODE] to clear it off .

4Press [–/ ] or [ /+] tog f

tune to the desired station.

The frequency changes one step

each time a button is pressed.

Automatic tuning

Keep [–/

g f] or [ /+] depressed and release when the frequency

display starts to change. A station with good reception is automati-

cally selected and the process stops.

To stop automatic tuning, press [–/

g f] or [ /+] again.

Note

Automatic tuning may stop on a frequency where there is no station if

there is interference. Press [–/

g f] and [ /+] to tune if this occurs.

5Adjust the volume.

To use auto scan

You can search for a station by listening to all tuned-in stations for 8

seconds each.

Preparation: Switch [ ] to “TUNER”.

1. Press [BAND] to select “FM” or “AM”.

2. Press [AUTO SCAN].

Auto scan starts.

3. Press [AUTO SCAN] when you find the desired station.

Auto scan ends when it reaches the original frequency again.

To stop during the process, press [AUTO SCAN].

To improve reception

FM: Extend the whip antenna and adjust its direction.

AM: Adjust facing of the unit.

If noise is excessive in the FM stereo mode

Press [FM MODE]. (“ ” lights up.)

Sound will be produced in monaural, but this also reduces noise.

Press the button again to cancel. (“ ” goes out.)

To receive FM broadcasts allocated in 0.1

MHz

(Only from the main unit)

First press [BAND] to select “AM”. Now, press and hold [BAND]. The dis-

play changes in a few seconds to show the current lowest FM frequency.

Continue to hold down the button.

The minimum frequency changes and the step is changed at the same

time. Changing the step erases all preset stations.

Repeat the above to change the step back.

Preset the stations (12 FM and 12 AM) to make tuning simpler.

1Tune to the desired station.

Do steps 1 4– on the left.

2Press [MEMORY].

3While “ ” and the frequency are

flashing

Press [MEMORY].

4While “ ” and the preset channel

are flashing

Press [–/ ] or [ /+] tog f

select the desired channel.

(Remote control: [4444

4] or [3333

3])

5Press [MEMORY].

(This completes presetting.)

6Repeat steps 1–5 to preset other stations.

Note

If “ ” goes off during presetting, return to step 2.

Press [BAND] to select “FM” or “AM”.

(Omit this step if using the remote control)

Press [TUNE MODE] to display

“ ”.

Press [–/

g f] or [ /+] to select

the desired channel (1–12).

(Remote control: [44

4] or [33

3])

To use preset scan

You can search for a station by listening to all preset channels for 8

seconds each.

1. Do steps to above.

For remote control, replace [–/

g f] or [ /+] described below with [4444

or [3333

3].

2. Press and hold [–/

g f] or [ /+] until “PS” appears on the display.

3. Press [–/

g f] or [ /+] when you find the desired channel.

Preset scan ends after searching through each preset channel once.

To stop during the process, press [–/

g f] or [ /+].

Normal tuning Preset tuning

Listening to radio broadcasts

To listen to preset channels

How to preset

Indicates

auto scan

Indicates

preset scan

“ ” lights when an FM stereo

broadcast is being received.

Preset channel

1 5 4

2 3

2 3 5 4

Product specificaties

Merk:	Panasonic
Categorie:	Hifi systeem
Model:	RX-D20

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic RX-D20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hifi systeem Panasonic

Panasonic SC-PM270 Handleiding

28 Mei 2024

Panasonic SC-PM704 Handleiding

28 Mei 2024

Panasonic SC-HC397 Handleiding

21 Mei 2024

Panasonic SC-AK630 Handleiding

22 April 2024

Panasonic RX-D15 Handleiding

11 April 2024

Panasonic RF-D100BT Handleiding

4 Februari 2024

Panasonic SC-PM500 Handleiding

19 Januari 2024

Panasonic SC-PM702 Handleiding

29 November 2023

Panasonic SC-VKX25 Handleiding

16 November 2023

Panasonic SC-VKX95 Handleiding

16 November 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Lenoxx CD813 Handleiding

16 November 2024

Denon CEOL N-8 Handleiding

16 November 2024

Fiio M7K Handleiding

16 November 2024

Fiio X1II Handleiding

16 November 2024

Fiio M3 Handleiding

16 November 2024

Fiio X3 Mark III Handleiding

16 November 2024

Pro-Ject BT Box E HD Handleiding

15 November 2024

Blaupunkt RCD 204 Handleiding

15 November 2024

Samsung MM-X7 Handleiding

15 November 2024

Auna VCP-191 Handleiding

14 November 2024