Panasonic PT-RW330E Handleiding

Panasonic Beamer PT-RW330E

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic PT-RW330E (127 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/127

Thank you for purchasing this Panasonic product.

■The Operating Instructions correspond to the rmware’s main version 3.02 and higher.

■Before operating this product, please read the instructions carefully and save this manual

for future use.

■Before using your projector, be sure to read “Read this rst!” ( x pages 2 to 7).

Model No. PT-RZ370E

PT-RW330E

TQBJ0491-3

DLPTM Projector Commercial Use

Operating Instructions

Functional Manual

ENGLISH

2 - ENGLISH

Read this rst!

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain

or moisture.

This device is not intended for use in the direct eld of view at visual display workplaces. To avoid

incommoding reexions at visual display workplaces this device must not be placed in the direct

eld of view.

The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied

service personnel.

3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong

earthingtype mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you

are unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the

earthing plug.

WARNING:

This is a class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

CAUTION: To assure continued compliance, follow the attached installation instructions, which include

using the provided power cord and shielded interface cables when connecting to computer or

peripheral device. If you use serial port to connect PC for external control of projector, you must

use a commercial RS-232C serial interface cable with ferrite core. Any unauthorized changes or

modications to this equipment will void the user’s authority to operate.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a

domestic environment.

Directive 2009/125/EC

Notice on laser

This projector is the Class 1 laser product that complies with IEC 60825-1.

Product information (for Turkey only)

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

Importer’s name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Center

Winsbergring 15, 22525 Hamburg, Germany

ENGLISH - 3

Read this rst!

WARNING:

POWER

The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible

when problems occur. If the following problems occur, cut off the power supply immediately.

Continued use of the projector in these conditions will result in re or electric shock.

zIf foreign objects or water get inside the projector, cut off the power supply.

zIf the projector is dropped or the cabinet is broken, cut off the power supply.

zIf you notice smoke, strange smells or noise coming from the projector, cut off the power supply.

Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.

During a thunderstorm, do not touch the projector or the cable.

Electric shocks can result.

Do not do anything that might damage the power cord or the power plug.

If the power cord is used while damaged, electric shocks, short-circuits or re will result.

zDo not damage the power cord, make any modications to it, place it near any hot objects, bend it

excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.

Completely insert the power plug into the wall outlet and the power connector into the projector terminal.

If the plug is not inserted correctly, electric shocks or overheating will result.

zDo not use plugs which are damaged or wall outlets which are coming loose from the wall.

Do not use anything other than the provided power cord.

Failure to observe this will result in re or electric shocks. Please note that if you do not use the provided power

cord to ground the device on the side of the outlet, this may result in electric shocks.

Clean the power plug regularly to prevent it from becoming covered in dust.

Failure to observe this will cause a re.

zIf dust builds up on the power plug, the resulting humidity can damage the insulation.

zIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.

Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.

Do not handle the power plug and power connector with wet hands.

Failure to observe this will result in electric shocks.

Do not overload the wall outlet.

If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.

ON USE/INSTALLATION

Do not place the projector on soft materials such as carpets or sponge mats.

Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.

Do not set up the projector in humid or dusty places or in places where the projector may come into

contact with oily smoke or steam, ex. a bathroom.

Using the projector under such conditions will result in re, electric shocks or deterioration of components.

Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the

ceiling to fall down.

Do not install this projector in a place which is not strong enough to take the full weight of the projector

or on top of a surface which is sloped or unstable.

Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage

could result.

Product specificaties

Merk:	Panasonic
Categorie:	Beamer
Model:	PT-RW330E
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	11000 g
Breedte:	455 mm
Diepte:	415 mm
Hoogte:	137 mm
Geluidsniveau:	35 dB
Stroombron:	AC
Plaatsing:	Plafond
Oorspronkelijke beeldverhouding:	16:10
Ethernet LAN:	Ja
Ondersteunde video-modi:	480i, 480p, 576i, 576p
Geïntegreerde geheugenkaartlezer:	Nee
Typische contrastverhouding:	10000:1
Zoomcapaciteit:	Ja
Projector helderheid:	3500 ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	WXGA (1280x800)
Keystone correctie, verticaal:	-40 - 40 °
Geschikt voor schermmaten:	40 - 300 "
Projectie-afstand objectief:	- m
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Audio-ingang (L, R):	1
Componentingang video (YPbPr/YCbCr):	1
DVI-poort:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Handmatig
Zoom type:	Handmatig
Diafragma (F-F):	2 - 3.4
Brandpuntbereik:	21.5 - 43 mm
Levensduur van de lichtbron:	20000 uur
Stroomverbruik (in standby):	8 W
Ondersteunde beeldverhoudingen:	16:10
Zoomverhouding:	2.0:1
Throw ratio:	1.53 - 3.09:1
Formaat analoog signaal:	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Volledige HD:	Nee
HDCP:	Ja
Ingang stroom:	Ja
3D:	Nee
Audio (L,R) out:	1
Geluidsniveau (spaarzame modus):	29 dB
Eenvormigheid:	90 procent
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	460 W
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Type product:	Projector met normale projectieafstand