Panasonic PT-LB51NTU Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic PT-LB51NTU (82 pagina's) in de categorie Projector. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/82
ENGLISH
R
Before operating this product, please read the instructions carefully and save this
manual for future use.
LCD Projector
Operating Instructions
Model No. PT-LB50NTU
PT-LB50U
PT-LB50SU
TQBJ 0192
Commercial Use
2-ENGLISH
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that
you might require. We hope it will help you to get the most out of your new
product, and that you will be pleased with your Panasonic LCD projector.
The serial number of your product may be found on its bottom. You should note
it in the space provided below and retain this booklet in case service is required.
Model number: PT-LB50NTU / PT-LB50U / PT-LB50SU
Serial number:
IMPORTANT SAFETY NOTICE
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
Power Supply: This LCD Projector is designed to operate on 100 V – 240 V, 50 Hz/60
Hz AC, house current only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can
only be used for power supplies up to 125 V, 7 A. If you need to use higher
voltages or currents than this, you will need to obtain a separate 250 V
power cord. If you use the accessory cord in such situations, fire may result.
CAUTION:
This equipment is equipped with a three-pin grounding-type power
plug. Do not remove the grounding pin on the power plug. This
plug will only fit a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact
an electrician. Do not defeat the purpose of the grounding plug.
Do not remove
ENGLISH-3
Preparation
WARNING:
B
Not for use in a computer room as defined in the Standard for the Protection
of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
BFor permanently connected equipment, a readily accessible disconnect
device shall be incorporated in the building installation wiring;
BFor pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables
when connecting to computers or peripheral devices.
Any unauthorized changes or modifications to this equipment will void the
users authority to operate.
FCC RF Exposure Warning: (if provided with wireless device)
–
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
–
This equipment has been approved for mobile operation and requires minimum
20 cm spacing be provided between antenna(s) and all person's body (excluding
extremities of hands, wrist and feet) during wireless modes of operation.
– This equipment may not be used with other installed transmitters, which
may be capable of simultaneous transmission.
Declaration of Conformity
Model Number: PT-LB50NTU / PT-LB50U / PT-LB50SU
Trade Name: Panasonic
Responsible party: Panasonic Corporation of North America
Address: One Panasonic Way Secaucus New Jersey 07094
Telephone number: 1-800-528-8601 or 1-800-222-0741
Email: pbtsservice@panasonic.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Product specificaties
| Merk: | Panasonic |
| Categorie: | Projector |
| Model: | PT-LB51NTU |
Heb je hulp nodig?
Als je hulp nodig hebt met Panasonic PT-LB51NTU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Projector Panasonic
1 September 2021
23 Augustus 2021
17 Juli 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
Handleiding Projector
Nieuwste handleidingen voor Projector
4 Februari 2022
28 November 2021
28 November 2021
28 November 2021
17 Juli 2021
12 Juli 2021
12 Juli 2021
12 Juli 2021
12 Juli 2021
12 Juli 2021