Panasonic PT-AE3000U Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Panasonic PT-AE3000U (60 pagina's) in de categorie Projector. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/60
ENGLISH
Operating Instructions
LCD Projector
Model No. PT-AE3000U
Before operating this product, please read the instructions carefully and save this manual for future use.
TQBJ0277-1
Important
Information
2 - ENGLISH
Important Safety Notice
Dear Panasonic Customer:
The following information should which will enable you be read and understood as it provides details, to operate the
projector in a manner which is both safe to you and your environment, and conforms to legal requirements regarding
the use of projectors. Before connecting, operating or adjusting this projector, please read these instructions
completely and save this booklet with the projector for future reference. We hope it will help you to get the most out
of your new product, and that you will be pleased with your Panasonic LCD projector.
The serial number of your product may be found on its bottom. You should note it in the space provided below and
retain this booklet in case service is required.
Model number: PT-AE3000U
Serial number:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
Power Supply: This LCD Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current
only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for
power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will
need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, fire
may result.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
CAUTION: This equipment is equipped with a three-pin grounding-type power
plug. Do not remove the grounding pin on the power plug. This plug
will only fit a grounding-type power outl ty feature. If et. This is a safe
you are unable to insert the plug into the outlet, contact an
electrician. Do not defeat the purpose of the grounding plug.
NOTICE: This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be
regulated in your community due to environmental considerations. For disposal or recycling
information, please contact your local authorities, or the Electronic Industries Alliance: http://
www.eiae.org
Do not remove
Important
Information
Important Safety Notice
ENGLISH - 3
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct
method of disposal.
WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when
connecting to computers or peripheral devices. Any unauthorized
changes or modifications to this equipment will void the users authority to
operate.
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Center
Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
WARNING: Not for use in a computer room as defined in the Standard for the Protection
of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
Declaration of Conformity
Model Number: PT-AE3000U
Trade Name: Panasonic
Responsible party: Panasonic Corporation of North America
Address: One Panasonic Way, Secaucus, New Jersey 07094
Telephone number: (888) 411 - 1996
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Product specificaties
| Merk: | Panasonic |
| Categorie: | Projector |
| Model: | PT-AE3000U |
Heb je hulp nodig?
Als je hulp nodig hebt met Panasonic PT-AE3000U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Projector Panasonic
1 September 2021
23 Augustus 2021
17 Juli 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
30 Juni 2021
Handleiding Projector
Nieuwste handleidingen voor Projector
4 Februari 2022
28 November 2021
28 November 2021
28 November 2021
17 Juli 2021
12 Juli 2021
12 Juli 2021
12 Juli 2021
12 Juli 2021
12 Juli 2021