Ozito MSK-001 Handleiding
Ozito
Schuurmachine
MSK-001
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito MSK-001 (6 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
MULTI
SANDER
200W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 200W
No Load Speed: 7,000-12,000/min
Paper Fitment: Hook & Loop
Paper Size: 145x100mm (Triangular)
125mm (Circular)
183x92mm (1/3 Sheet)
Weight: 1.38kg
MSK-001
STANDARD EQUIPMENT
Multi Sander
3 x Sanding Paper
Dust Canister
3 x Sanding Base
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon
brushes, dust bags, backing pads and sanding sheets.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0519
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. CHANGING SANDING BASES
6 Random Orbital Sanding Base
7 Random Orbital Sanding
Paper x 1 (120Grit)
8 Sheet Sanding Base
9 Sheet Sanding Paper x 1
(60Grit)
10 Detail Sanding Base
11 Detail Sanding Paper x 1
(80Grit)
ACCESSORIES
1 Variable Speed Dial
2 Hook & Loop Sanding Pad
3 On/OSwitch
4 Sure Grip Handle
5 Dust Canister
MULTI SANDER
SETUP & PREPARATION
WARNING: ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS..
WARNING: ENSURE THAT THE SCREWS ARE NOT
TIGHTENED WITH EXCESSIVE FORCE. DO NOT
USE A POWER DRILL FOR THIS OPERATION.
1 2 3 4 5
6 7 8 109 11
TheMultiSandercomeswith3sandingbasesthatcanbettedto
the tool, including:
• Circular random orbital sanding base (125mm)
• Triangular detail sanding base (145x100mm)
• Rectangular 1/3 sheet sanding base (183x91mm)
Note:Beforeremovingorttingthesandingbases,anysandpaper
must be removed so that you can access the mounting screws.
Removing Sanding Bases
Fitting Sanding Bases
1 Remove the 4 screws from the
base of the sanding pad by
rotating anti-clockwise.
1 Place the sanding base onto
the tool, aligning the mounting
holes and the aligning pins.
Note: The circular sanding base
does not require aligning pins.
2 Pull the sanding base
and aligning pins away
from the tool to remove.
Note: The base aligning
pins can sometimes get
stuck in the base of the tool.
2 Tighten the 4 screws into
the base of the sanding
pad with a screwdriver to
secure in place.
2. DUST CANISTER2. FITTING SANDING PAPER
1 Align the holes on the sanding sheet with the holes on the
sanding pad and then press onto the pad.
3 To empty, lift the lid of the dust
canister over a bin and then
empty.
Note: Ensure the lid is secured
tightly back onto the container
after emptying.
2 Push the dust canister
hard onto the dust
extraction port.
Note: You should hear a
clickoncettedcorrectly.
4 Push the dust canister
hard onto the dust
extraction port until it
clicks into place.
2 Replace the sanding sheet when it is worn.
3 Replace hook &
loop backing pad
when worn (see
maintenance section).
InstallingHook and Loop Paper Fitment
Emptying
1/3 Sheet Sanding Clamp System
1 Empty dust canister when it
becomes 1/3 full for optimum
dust extraction.
1 Ensure that the lid is pressed
tightly onto the container.
Note: You should hear a click
oncettedcorrectly.
1 Unhook one of the clamp
springs and insert the front of
the sand paper, ensuring the
holes in the paper align with
the holes in the pad.
The rectangular sheet sanding pad also features a clamping system
toallowfortting1/3sheetsandingpaperthatdoesnothavehook
andlooptment.
1/3 Full
a
b
2 Position over a bin and
press the release tab at
the top of the lid. Then
pull the dust canister
away from the extraction
port.
2 Lock the clamp spring
and repeat for the 2nd
spring, ensuring the
paper is pulled tightly.
a
b
Product specificaties
| Merk: | Ozito |
| Categorie: | Schuurmachine |
| Model: | MSK-001 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito MSK-001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schuurmachine Ozito
16 Maart 2024
16 Maart 2024
25 Juni 2023
20 Juni 2023
17 Juni 2023
17 Juni 2023
15 Juni 2023
12 Juni 2023
11 Juni 2023
6 Juni 2023
Handleiding Schuurmachine
- Schuurmachine Bosch
- Schuurmachine AEG
- Schuurmachine DeWalt
- Schuurmachine Arendo
- Schuurmachine Batavia
- Schuurmachine Bavaria
- Schuurmachine Black Decker
- Schuurmachine Bort
- Schuurmachine Bruder Mannesmann
- Schuurmachine Dremel
- Schuurmachine Duro
- Schuurmachine Duro Pro
- Schuurmachine Einhell
- Schuurmachine Elu
- Schuurmachine Fein
- Schuurmachine Ferm
- Schuurmachine Festool
- Schuurmachine Flex
- Schuurmachine Gamma
- Schuurmachine Gastroback
- Schuurmachine Global
- Schuurmachine Gude
- Schuurmachine Hikoki
- Schuurmachine Hitachi
- Schuurmachine Holzmann
- Schuurmachine Hyundai
- Schuurmachine Kinzo
- Schuurmachine Kress
- Schuurmachine Maestro
- Schuurmachine Makita
- Schuurmachine Maktec
- Schuurmachine Matrix
- Schuurmachine Max
- Schuurmachine Metabo
- Schuurmachine Milwaukee
- Schuurmachine Parkside
- Schuurmachine Powerplus
- Schuurmachine Protool
- Schuurmachine Rupes
- Schuurmachine Ryobi
- Schuurmachine Scheppach
- Schuurmachine Silverline
- Schuurmachine Skil
- Schuurmachine Stanley
- Schuurmachine Stomer
- Schuurmachine Toledo
- Schuurmachine Toolcraft
- Schuurmachine Topcraft
- Schuurmachine Trotec
- Schuurmachine Varo
- Schuurmachine Vonroc
- Schuurmachine Westfalia
- Schuurmachine Workzone
- Schuurmachine Worx
- Schuurmachine Black And Decker
- Schuurmachine Cocraft
- Schuurmachine Meec Tools
- Schuurmachine Far Tools
- Schuurmachine Hilti
- Schuurmachine Power Craft
- Schuurmachine Tacklife
- Schuurmachine Truper
- Schuurmachine Fieldmann
- Schuurmachine Mafell
- Schuurmachine Proxxon
- Schuurmachine Biltema
- Schuurmachine Porter-Cable
- Schuurmachine Probuilder
- Schuurmachine Dedra
- Schuurmachine RIDGID
- Schuurmachine Tryton
- Schuurmachine Herkules
- Schuurmachine Craftsman
- Schuurmachine Rikon
- Schuurmachine Alpha Tools
- Schuurmachine Hazet
- Schuurmachine Stalco
- Schuurmachine Powertec
- Schuurmachine Meister Craft
- Schuurmachine King Craft
- Schuurmachine Toolson
- Schuurmachine Wagner SprayTech
- Schuurmachine Einhell Bavaria
- Schuurmachine McKenzie
- Schuurmachine Prowork
- Schuurmachine Proviel
- Schuurmachine Ribimex
- Schuurmachine FIXIT
- Schuurmachine Ergotools Pattfield
- Schuurmachine THUN
- Schuurmachine Bavaria By Einhell
- Schuurmachine Pevec
- Schuurmachine Handwerk
- Schuurmachine TAURUS Titanium
Nieuwste handleidingen voor Schuurmachine
4 December 2024
4 December 2024
30 November 2024
30 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024