Ozito LMBL-1018 Handleiding
Ozito
Bladblazer
LMBL-1018
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito LMBL-1018 (12 pagina's) in de categorie Bladblazer. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
ELECTRIC
BLOWER
1800W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1800 Watt
Input: 230–240V~50Hz
No Load Speed: 15,000/min
Max. Air Volume: 350m3/hour
Max. Air Speed: 320km/hour
Noise Level: 100dB
Weight: 2.8kg
LMBL-1018
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: blower tube,
carbon brushes.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0617
Blower
Direction Nozzle
Blow Tube
Assembly Screws
3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Connecting the blow tube and direction nozzle
1. Unpack the blow tube and
direction nozzle.
2. Connect larger end of the direction
nozzle to the smaller end of the
blow tube.
3. Ensure that all 3 buttons on the blow tube
sit within the holes in the direction nozzle.
4. Connect the blow tube to the
blower housing, ensuring that the
blower housing tabs click into the
holes in the blow tube.
5. Secure the blower tube to the
blower housing with the two 12mm
screws.
1. Direction nozzle
2. Blow tube
3. Handle
4. On/Off trigger
5. Cord retaining hook
6. Air intake vent
7. Assembly screws 2 x 12mm
ELECTRIC BLOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2
7
3 4
6
5
WARNING! ALWAYS ENSURE THE BLOWER IS
DISCONNECTED FROM THE POWER SUPPLY
DURING ASSEMBLY AND/OR MAINTENANCE.
Using the extension cord retaining hook
The cord retaining hook is used to “anchor” an extension cord when it is
connected to the power lead of the tool. It prevents the extension cord
from being accidentally disconnected from the blower’s power cable or
shaken loose during use. It should be used at all times.
1. Make a loop in the end of the
extension lead and pass the loop
though the hole in the rear of the
handle.
2. Hook the loop over the cord
retaining hook. Pull the extension
cord to secure it in position over the
cord retaining hook.
3. Connect the extension
lead to the power cord.
Route the power and
extension cord away
from the work area to
prevent contact with the
blower.
NOTE: Always use an approved extension lead suitable for the power
input of this tool.
Turning ON
To turn the blower on, depress
the trigger switch.
Turning OFF
To turn the blower off, release
the trigger switch.
2. TRIGGER SWITCH
OPERATION
WARNING! THE POWER SUPPLY FOR THIS
PRODUCT SHOULD BE PROTECTED BY A
RESIDUAL CURRENT DEVICE RATED AT 30mA OR LESS.
Product specificaties
| Merk: | Ozito |
| Categorie: | Bladblazer |
| Model: | LMBL-1018 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito LMBL-1018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bladblazer Ozito
2 November 2024
8 April 2024
8 April 2024
16 Maart 2024
9 November 2023
3 Juni 2023
31 Mei 2023
26 Mei 2023
23 Mei 2023
22 Mei 2023
Handleiding Bladblazer
- Bladblazer Bosch
- Bladblazer Panasonic
- Bladblazer DeWalt
- Bladblazer Karcher
- Bladblazer WOLF-Garten
- Bladblazer Al-ko
- Bladblazer Alpina
- Bladblazer Atika
- Bladblazer Black Decker
- Bladblazer Brandson
- Bladblazer Dolmar
- Bladblazer Echo
- Bladblazer Einhell
- Bladblazer Eurogarden
- Bladblazer Farmer
- Bladblazer Ferrex
- Bladblazer Flex
- Bladblazer Florabest
- Bladblazer Flymo
- Bladblazer Fuxtec
- Bladblazer Gamma
- Bladblazer Garden Feelings
- Bladblazer Gardena
- Bladblazer Gardenline
- Bladblazer Gardol
- Bladblazer GBM
- Bladblazer GForce
- Bladblazer Global
- Bladblazer Greenworks
- Bladblazer Grizzly
- Bladblazer Gude
- Bladblazer Hikoki
- Bladblazer Hitachi
- Bladblazer Homelite
- Bladblazer Honda
- Bladblazer Husqvarna
- Bladblazer Hyundai
- Bladblazer Kibani
- Bladblazer Kress
- Bladblazer Makita
- Bladblazer McCulloch
- Bladblazer Metabo
- Bladblazer Milwaukee
- Bladblazer Mr Gardener
- Bladblazer MTD
- Bladblazer Parkside
- Bladblazer Pattfield
- Bladblazer Powerplus
- Bladblazer Powertec Garden
- Bladblazer Remington
- Bladblazer Robust
- Bladblazer Ryobi
- Bladblazer Scheppach
- Bladblazer Skil
- Bladblazer Solo
- Bladblazer Stanley
- Bladblazer Stiga
- Bladblazer Stihl
- Bladblazer Tanaka
- Bladblazer Tesco
- Bladblazer Texas
- Bladblazer Toledo
- Bladblazer Top Garden
- Bladblazer Topcraft
- Bladblazer Toro
- Bladblazer Troy-Bilt
- Bladblazer Varo
- Bladblazer Vonroc
- Bladblazer Westfalia
- Bladblazer Worx
- Bladblazer Black And Decker
- Bladblazer Cocraft
- Bladblazer Meec Tools
- Bladblazer Hilti
- Bladblazer Cobra
- Bladblazer Cotech
- Bladblazer Truper
- Bladblazer Fieldmann
- Bladblazer McGregor
- Bladblazer Prime3
- Bladblazer Sun Joe
- Bladblazer Yard Force
- Bladblazer Cramer
- Bladblazer EGO
- Bladblazer Grouw
- Bladblazer Maruyama
- Bladblazer Sovereign
- Bladblazer Spear & Jackson
- Bladblazer Tryton
- Bladblazer Powerworks
- Bladblazer Craftsman
- Bladblazer Verto
- Bladblazer Zenoah-Komatsu
- Bladblazer Snow Joe
- Bladblazer Yato
- Bladblazer Jonsered
- Bladblazer Bestgreen
- Bladblazer Baumr-AG
- Bladblazer IKRA
- Bladblazer MTM
- Bladblazer Arebos
- Bladblazer Anova
- Bladblazer Massimo
- Bladblazer Prowork
- Bladblazer LawnMaster
- Bladblazer Bahr
Nieuwste handleidingen voor Bladblazer
19 November 2024
19 November 2024
17 November 2024
17 November 2024
16 November 2024
16 November 2024
14 November 2024
5 November 2024
3 November 2024
3 November 2024