Ozito BSV-9000 Handleiding
Ozito
Schuurmachine
BSV-9000
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito BSV-9000 (6 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
BELT
SANDER
850W
INSTRUCTION MANUAL
BSV-9000
STANDARD EQUIPMENT
Belt Sander
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: sand paper, carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0719
Sanding Belt
SPECIFICATIONS
Input: 230-240V ~ 50Hz
Power: 850W
Belt Speed: 300-400m/min
Belt Surface: 75 x 140mm
Belt Size: 75 x 533mm
Weight: 3.1kg
77
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Adjustable Front Handle
2 Belt Tracking Knob
3 Sanding Guard Release
Button
4 Handle Locking Knob
5 ON/OFF Trigger (not shown)
6 Lock-on Switch (not shown)
7 Dust Canister
8 Variable Speed Dial
BELT SANDER
KNOW YOUR PRODUCT
1. DUST CANISTER
SETUP & PREPARATION
Ensure the tool is disconnected from the power supply
before performing any of the following operations.
To Adjust the Front Handle
1. Slide the dust canister
down onto the dust
extraction port.
2. Move the handle into your
desired position.
3. Regularly check the dust canister and empty when it becomes
1/3 full for optimum dust extraction.
9 Sandingbelt(tted)
ACCESSORIES
1. Loosen the handle
locking knob.
3. Tighten the handle
locking knob to secure
this position.
2. To remove, slide the dust
canisterupothedust
extraction port.
1/3 Full
2. SANDING BELT 3. BELT ADJUSTMENT
OPERATION
When installing a belt, ensure you have the correct size for your
belt sander, and correct grit for your workpiece. Belts have arrows
markedonthemtoassistinttingthemtothebeltsanderinthe
correct direction. Belts are also marked with a grit rating.
Install
3. Gently place the belt over the front and rear rollers.
1. Placethebeltsanderonitsleftsideonaatsurface.
CAUTION: The arrows on the belt must be aligned with the
markings on the belt sander.Incorrecttmentcouldcausethe
belt to break. Belts are not covered by the warranty.
CAUTION: Ensure body parts, cords, workpieces and any
loose items are clear of the sanding belt before performing
the tracking adjustment operation
Tracking Adjustment
1. Turn the sander upside
downandholditrmly
with one hand. Press the
on/oswitchtostartthe
sander and observe the
tracking of the sanding
belt.
2. If the belt tracks
outward, turn the belt
tracking knob clockwise.
If the belt tracks inward
turn the belt tracking
knob counter clockwise.
the belt sander.
It is necessary to ensure the belt is tracking correctly, in a straight
line,toavoidthebelt‘trackingo’thebeltsander’srollers.
3. Adjust the belt until its outer edge is even with the outer edge
of the front and rear rollers. Make sure the belt does not rub
against the rear guide strip. Once the belt stabilizes you can
begin operation.
2. Pull the belt tension lever out, toward the front of the sander.
4. Close the belt
tension lever.
Follow the above procedure to remove a sanding belt,
removing the belt in step 3 instead of placing the belt.
Product specificaties
| Merk: | Ozito |
| Categorie: | Schuurmachine |
| Model: | BSV-9000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito BSV-9000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schuurmachine Ozito
16 Maart 2024
16 Maart 2024
25 Juni 2023
20 Juni 2023
17 Juni 2023
17 Juni 2023
15 Juni 2023
12 Juni 2023
11 Juni 2023
6 Juni 2023
Handleiding Schuurmachine
- Schuurmachine Bosch
- Schuurmachine AEG
- Schuurmachine DeWalt
- Schuurmachine Arendo
- Schuurmachine Batavia
- Schuurmachine Bavaria
- Schuurmachine Black Decker
- Schuurmachine Bort
- Schuurmachine Bruder Mannesmann
- Schuurmachine Dremel
- Schuurmachine Duro
- Schuurmachine Duro Pro
- Schuurmachine Einhell
- Schuurmachine Elu
- Schuurmachine Fein
- Schuurmachine Ferm
- Schuurmachine Festool
- Schuurmachine Flex
- Schuurmachine Gamma
- Schuurmachine Gastroback
- Schuurmachine Global
- Schuurmachine Gude
- Schuurmachine Hikoki
- Schuurmachine Hitachi
- Schuurmachine Holzmann
- Schuurmachine Hyundai
- Schuurmachine Kinzo
- Schuurmachine Kress
- Schuurmachine Maestro
- Schuurmachine Makita
- Schuurmachine Maktec
- Schuurmachine Matrix
- Schuurmachine Max
- Schuurmachine Metabo
- Schuurmachine Milwaukee
- Schuurmachine Parkside
- Schuurmachine Powerplus
- Schuurmachine Protool
- Schuurmachine Rupes
- Schuurmachine Ryobi
- Schuurmachine Scheppach
- Schuurmachine Silverline
- Schuurmachine Skil
- Schuurmachine Stanley
- Schuurmachine Stomer
- Schuurmachine Toledo
- Schuurmachine Toolcraft
- Schuurmachine Topcraft
- Schuurmachine Trotec
- Schuurmachine Varo
- Schuurmachine Vonroc
- Schuurmachine Westfalia
- Schuurmachine Workzone
- Schuurmachine Worx
- Schuurmachine Black And Decker
- Schuurmachine Cocraft
- Schuurmachine Meec Tools
- Schuurmachine Far Tools
- Schuurmachine Hilti
- Schuurmachine Power Craft
- Schuurmachine Tacklife
- Schuurmachine Truper
- Schuurmachine Fieldmann
- Schuurmachine Mafell
- Schuurmachine Proxxon
- Schuurmachine Biltema
- Schuurmachine Porter-Cable
- Schuurmachine Probuilder
- Schuurmachine Dedra
- Schuurmachine RIDGID
- Schuurmachine Tryton
- Schuurmachine Herkules
- Schuurmachine Craftsman
- Schuurmachine Rikon
- Schuurmachine Alpha Tools
- Schuurmachine Hazet
- Schuurmachine Stalco
- Schuurmachine Powertec
- Schuurmachine Meister Craft
- Schuurmachine King Craft
- Schuurmachine Toolson
- Schuurmachine Wagner SprayTech
- Schuurmachine Einhell Bavaria
- Schuurmachine McKenzie
- Schuurmachine Prowork
- Schuurmachine Proviel
- Schuurmachine Ribimex
- Schuurmachine FIXIT
- Schuurmachine Ergotools Pattfield
- Schuurmachine THUN
- Schuurmachine Bavaria By Einhell
- Schuurmachine Pevec
- Schuurmachine Handwerk
- Schuurmachine TAURUS Titanium
Nieuwste handleidingen voor Schuurmachine
4 December 2024
4 December 2024
30 November 2024
30 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024