Ozito AGB-1201 Handleiding
Ozito
Slijpmachine
AGB-1201
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito AGB-1201 (6 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 82 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
ANGLE
GRINDER KIT
125mm (5”) 1200W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1200W
No Load Speed: 12,000/min
Cutting Diameter: 125mm (5”)
Spindle: M14
Bore Size: 22mm
Max. Disc Thickness: 6mm
Weight: 1.95kg
AGB-1201
STANDARD EQUIPMENT
Angle Grinder
Inner & Outer Flange
Pin Spanner & Spare
Brushes
Side Handle
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: grinding discs,
carbon brushes, disc guard, flange.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Grinding Discs,
Metal Cutting Disc &
Diamond Cutting Disc
Grinding Guard &
Cutting Guard
0318
D
a
n
g
e
r
:
D
o
n
o
t
e
x
c
e
e
d
t
h
e
m
a
x
.
s
a
f
e
s
p
e
e
d
1
2
5
m
m
(
5
”
)
M
e
t
a
l
G
r
i
n
d
i
n
g
D
i
s
c
M
a
x
1
2
,
2
0
0
R
P
M
125x1.9x22.23mm
D
a
n
g
e
r
:
D
o
n
o
t
e
x
c
e
e
d
t
h
e
m
a
x
.
s
a
f
e
s
p
e
e
d
1
2
5
m
m
(
5
”
)
M
e
t
a
l
C
u
t
t
i
n
g
D
i
s
c
M
a
x
1
2
,
0
0
0
R
P
M
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
D
a
n
g
e
r
:
D
o
n
o
t
e
x
c
e
e
d
t
h
e
m
a
x
.
s
a
f
e
s
p
e
e
d
1
2
5
m
m
(
5
”
)
M
e
t
a
l
C
u
t
t
i
n
g
D
i
s
c
M
a
x
1
2
,
0
0
0
R
P
M
D
a
n
g
e
r
:
D
o
n
o
t
e
x
c
e
e
d
t
h
e
m
a
x
.
s
a
f
e
s
p
e
e
d
1
2
5
m
m
(
5
”
)
M
e
t
a
l
G
r
i
n
d
i
n
g
D
i
s
c
M
a
x
1
2
,
2
0
0
R
P
M
KNOW YOUR PRODUCT
1. SIDE HANDLE & SAFETY GUARD
6 Cutting Guard
7 Pin Wrench
8 Grinding Guard
9 Inner Flange
10 Outer Flange
11 Metal Grinding Disc x 1
12 Metal Cutting Disc x 1
13 Diamond Cutting Disc x1
14 Spare Brushes
ACCESSORIES
SETUP & PREPARATION
Adjustable Safety Guards
A guard should be used at all times whilst
operating the angle grinder.
Use ONLY the Grinding
Guard with a grinding disc.
Use ONLY the
Cutting Guard with
a cutting disc.
Attaching Guard
Removing Guard
3 Loosen guard lever.
1 Loosen guard lever, align
tabs and rotate guard to the
required position.
2 Tighten guard by pressing
the lever down.
4 Align tabs on the guard with
slots on the guard collar.
Remove guard.
125x1.9x22.23mm
1 Spindle Lock Button
2 Grinding Guard
3 Side Handle
4 Safety Lock Off Button
5 On/Off Trigger
ANGLE GRINDER KIT
Fitting the Side Handle
1 Firmly attach the side handle
in the desired position by
rotating clockwise.
2 To remove the side handle
rotate it anti-clockwise.
The side handle can be tted on either side of your grinder. The
correct position will be determined by your preferred hand and the
operation being performed.
5 Screw the outer ange onto the spindle.
Note: The at surface on the ange should be in contact with
the cutting disc.
2. GRINDING DISC FITMENT 3. CUTTING DISC FITMENT
Inspect the cutting disc before tment to ensure it is not cracked or
deformed. The cutting disc is suitable for cutting tasks only. Only
use cutting discs with a diameter of 125mm.
CAUTION: REGULARLY CHECK THAT
THE OUTER FLANGE HAS NOT BECOME
LOOSE DURING OPERATION.
CAUTION: REGULARLY CHECK THAT THE
OUTER FLANGE HAS NOT BECOME LOOSE
DURING OPERATION.
1 Depress and hold
spindle lock button.
2 Rotate spindle to locate
the lock position.
7 Use the above operation in reverse to remove grinding disc.
6 Depress and hold spindle
lock button. Firmly tighten
the outer ange with the
pin spanner.
3 Use pin spanner to
loosen and remove the
outer ange.
4 Insert the disc with the
label facing up.
Use ONLY the Cutting
Guard with a cutting disc.
D
a
n
g
e
r
:
D
o
n
o
t
e
x
c
e
e
d
t
h
e
m
a
x
.
s
a
f
e
s
p
e
e
d
1
2
5
m
m
(
5
”
)
M
e
t
a
l
C
u
t
t
i
n
g
D
i
s
c
M
a
x
1
2
,
0
0
0
R
P
M
1 Depress and hold the spindle
lock button.
3 Use the pin spanner to
loosen the outer ange.
5 Screw the outer ange onto
the spindle.
Note: The at side of the ange
locates against the disc.
Inspect the grinding disc before tment to ensure it is not cracked
or deformed. The grinding disc is suitable for grinding tasks only.
Only use grinding discs with a diameter of 125mm.
2 Rotate the spindle to locate
the lock position.
4 Insert the disc with the label
facing up.
6 Depress and hold the
spindle lock button. Firmly
tighten the outer ange with
the pin spanner.
Use ONLY the Grinding
Guard with a grinding disc.
Product specificaties
| Merk: | Ozito |
| Categorie: | Slijpmachine |
| Model: | AGB-1201 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito AGB-1201 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Slijpmachine Ozito
25 Juni 2023
19 Juni 2023
17 Juni 2023
14 Juni 2023
13 Juni 2023
1 Juni 2023
22 Februari 2023
14 Februari 2023
20 Januari 2023
15 December 2022
Handleiding Slijpmachine
- Slijpmachine Bosch
- Slijpmachine AEG
- Slijpmachine DeWalt
- Slijpmachine ABB
- Slijpmachine Adler
- Slijpmachine Aquapur
- Slijpmachine ATI-ZDL
- Slijpmachine Batavia
- Slijpmachine Bavaria
- Slijpmachine Black Decker
- Slijpmachine Bort
- Slijpmachine Bruder Mannesmann
- Slijpmachine Bunn
- Slijpmachine Defort
- Slijpmachine Dolmar
- Slijpmachine Dolmar(Makita)
- Slijpmachine Dremel
- Slijpmachine Duro
- Slijpmachine Duro Pro
- Slijpmachine Einhell
- Slijpmachine Ergofix
- Slijpmachine Fein
- Slijpmachine Felisatti
- Slijpmachine Ferm
- Slijpmachine Festool
- Slijpmachine Flex
- Slijpmachine Florabest
- Slijpmachine Gamma
- Slijpmachine Global
- Slijpmachine Goon
- Slijpmachine Gorenje
- Slijpmachine Gude
- Slijpmachine Gude Pro
- Slijpmachine Hikoki
- Slijpmachine Hitachi
- Slijpmachine Holzmann
- Slijpmachine Husqvarna
- Slijpmachine Hyundai
- Slijpmachine Kawasaki
- Slijpmachine Kress
- Slijpmachine Maestro
- Slijpmachine Makita
- Slijpmachine Maktec
- Slijpmachine Max
- Slijpmachine Mesko
- Slijpmachine Metabo
- Slijpmachine Milwaukee
- Slijpmachine Parkside
- Slijpmachine Pattfield
- Slijpmachine Powerfix
- Slijpmachine Powerplus
- Slijpmachine Profitec
- Slijpmachine Ryobi
- Slijpmachine Scheppach
- Slijpmachine Silvercrest
- Slijpmachine Silverline
- Slijpmachine Skil
- Slijpmachine Solo
- Slijpmachine Stanley
- Slijpmachine Stomer
- Slijpmachine Tanaka
- Slijpmachine Toolcraft
- Slijpmachine Toolland
- Slijpmachine Trotec
- Slijpmachine United Office
- Slijpmachine Vonroc
- Slijpmachine Westfalia
- Slijpmachine Workzone
- Slijpmachine Worx
- Slijpmachine Black And Decker
- Slijpmachine ECG
- Slijpmachine Steren
- Slijpmachine Cocraft
- Slijpmachine Meec Tools
- Slijpmachine Yamato
- Slijpmachine Genesis
- Slijpmachine Eibenstock
- Slijpmachine Hilti
- Slijpmachine Nuova Simonelli
- Slijpmachine Cotech
- Slijpmachine Power Craft
- Slijpmachine Truper
- Slijpmachine Fieldmann
- Slijpmachine Mirka
- Slijpmachine Proxxon
- Slijpmachine Malmbergs
- Slijpmachine Porter-Cable
- Slijpmachine Graphite
- Slijpmachine RIDGID
- Slijpmachine Tryton
- Slijpmachine Sthor
- Slijpmachine Craftsman
- Slijpmachine Rikon
- Slijpmachine Chicago Pneumatic
- Slijpmachine Alpha Tools
- Slijpmachine Hazet
- Slijpmachine Yato
- Slijpmachine Baumr-AG
- Slijpmachine Meister Craft
- Slijpmachine Neo
- Slijpmachine Victoria Arduino
- Slijpmachine SW-Stahl
- Slijpmachine Cleco
- Slijpmachine Einhell Bavaria
- Slijpmachine McKenzie
- Slijpmachine Proviel
- Slijpmachine Gladiator
- Slijpmachine Rodcraft
- Slijpmachine Bavaria By Einhell
- Slijpmachine Classic Power
- Slijpmachine Handwerk
Nieuwste handleidingen voor Slijpmachine
23 November 2024
22 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
18 November 2024
17 November 2024
15 November 2024