OSD Audio Nero Arc 4 Handleiding

OSD Audio Speaker Nero Arc 4

Lees hieronder de 📖 handleiding in het Nederlandse voor OSD Audio Nero Arc 4 (5 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
NERO 70V/100V/8 PENDANT SPEAKERSARC 4/6/8/SUB �
INSTALL GUIDE
NERO-ARC4/6/8/SUB INSTA UIDE
Preparation:
Tools For Installation Speaker Wire Guide
Considerations
Included
Introduction
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Where is the best place to install the speakers?
- Where do the speakers sound the best?
- Separate the speakers 6 - 10 feet apart.
The Nero-ARC Series Products are designed for high ceilings and open space environments. Featuring silk dome
tweeters and Graphite woofers with an aluminum rust resistant grille. A UV resistant enclosure makes it ideal for outdoor
applications as well. The Nero-ARC Series also comes with a built-in 6 position tap for 8 Ohm and 70/100V set-ups.
18AWG minimum - for distances up to …………………. 10 ft
16AWG - from …………………………………..…... 10 to 50 ft
14AWG - from …………………………………...… 50 to 100 ft
top cover eye hook & nut hanging cable
carabiner x2 screws x2
speaker
user manual
NERO-ARC4/6/8/SUB INSTA UIDE
Set Up & Operation
Nero-ARC Series Products are designed to hang from the ceiling. A safety cable should be used when installing the
speakers to avoid personal injury and damage to the speaker.
1. Set the proper speaker setting for your application 6 position switch (8ohm-0-xW-xW-xW-xW).
2. Install the top cover and fasten the provided eye hook, nut and washer to the top cover and speaker as illustrated below.
3. At each speaker location, route the speaker cable(s) hanging from the ceiling area through the top cover, and dress the
cables to the wire rope using plastic cable ties. Slide the speaker cables through the supplied back cover. Strip the ends
back to 1/8" to 3/16".
4. Connect the wires from the amplifier to the supplied terminal block, Using the IN terminals: red to + and black to -.
Please refer to the following pages for examples of various types of applications.
5. Attach the safety cable to the speaker.
6. If using the bracket to wall or ceiling mount, be sure to use the appropriate hardware to securely attach the speaker.


Product specificaties

Merk: OSD Audio
Categorie: Speaker
Model: Nero Arc 4

Heb je hulp nodig?

Als je hulp nodig hebt met OSD Audio Nero Arc 4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker OSD Audio

Handleiding Speaker

Nieuwste handleidingen voor Speaker