OSD Audio AP640 Handleiding

OSD Audio Speaker AP640

Lees hieronder de 📖 handleiding in het Nederlandse voor OSD Audio AP640 (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

and value in everything we make. To ensure you get the most out of your new patio speakers, please take a moment to read this manual before you get started.

Installing Speakers

These weather resistant patio speakers are manufactured to resist

a variety of weather condition. The most ideal place to install these

speakers is the undersides of most eaves and overhangs as they

provide the best protection.

Like all speakers, they sound the best when placed no more than

seven feet apart from each other, and slightly higher than ear level.

If the speakers are more than seven feet apart, toe them in toward

the center of the listening area.

These speakers are not waterproof and cannot be submerged under

water.

Placing Speakers

If your application requires the speaker to be mounted, please

follow these directions. Using the hardware supplied, mount the

plastic knobs supplied. Never mount a speaker on a wall made

of unreinforced d wall or plasterboardry . If you are unsure,

consult a professional contractor. (See Diagram 1)

The binding post speaker terminals on the speakers will accommodate

power setting through the knob switch. When connecting the speakers,

it is very important to observe the correct polarity. This means that the

wire attached to the (+), red, or positive terminals on one component

must be attached to the (+), red, or positive terminal on the

corresponding component speaker output terminals. Similarly, the (-),

Black, Negative or ground terminals must connect to the respective (-),

Black, Negative, or ground terminals. This is easy to do by locating the

color stripes that appears on most wire.

Painting the grilles

The metal grilles may also be painted. Use very thin paint (5:1). It will

plugging up the holes with excess pai .nt

Mounting

To install the bracket on the speaker. Screw the bracket knobs into the

cabinet. Point the speaker toward the listening area. Once the direction

of the speaker has been determined tighten the bracket knobs securely.

(See Diagram 2)

Diagram 1

Screw

Bracket

Diagram 2

First remove the grille fom the speaker using spray paint lightly go

over the front of the grille and then go over the back of the grille.

Two coats may be nessesary for desired look.

Knob

Patio Speaker Installation Manual

Warranty & Repair

A A ducts ( year mited Warranty inst d e f of p e ompany ll OSD UDIO speaker pro have 1) Li aga efects in mat rials and workmanship. Proo urchas must acc all claims.

Du ing the warranty period OSD AUDIO will replace any defect ve p rt nd efe ip it ut ha ge f r e the p rts r abor i a a corr ct anye d ct in sh workman w ho c r o i r a o l r

are not OSD AUDIO’s responsibility.

For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by OSD AUDIO. The unit

must be returned to OSD AUDIO at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor

is damaged resulting from abuse or from servicing performed by an agency or person

OSD AUDIO sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any OSD AUDIO product

purchased from an unauthorized dealer or other source, including retailers, mail over dealers and online sellers will not be honored or serviced under existing OSD

AUDIO warranty policy. Any sale of product by an unauthorized source or other manner not authorized by OSD AUDIO shall void the warranty on the applicable

product.

Dama to ge or des uction oftr components due to application of excess vei po r we voids the warranty on thos e p . arts In these es, rcas epairs will be made on the basis tof he retail

value of the aparts nd labor. To ret urn o r sfor repairs, you must email cust me ervice RMat A@OSDA .UDIO com for a Returned e r (Merchandis Autho ization RMA) number# then

the unit m t s OSD wus be hipped to AUDIO at the owner's expense, along ith a note explainin th naturg e e of servic uire req ed. e pBe sur to ack th e s ape ker(s) in a corrugated

co tain ner with at least 3 inches of es ie m er l p te tr il nt at ia to ro ct he u t fni rom amd age in transit.

This Warranty Does Not Cover:

Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) • • Any product whose

identifying number of decal, serial #, etc. has been altered, defaced or removed Normal wear and maintenance.•

WIRING

Connect the speaker cable to the speaker cable terminals, matching the proper polarity with your amplier, + to + (red) and - to - (black). Make sure

to connect the right channel to the right speaker and the left channel to the left speaker . Either channel may be attached to either terminals set,

however, be sure that polarity ( + and - ) is correct on each channel or the performance of the speaker will be seriously aected as one channel will

cancel out the other.

70 Volts consideration (Applicable to only 70V tap speakers)

The 70V transformer offers you the ability to daisy chain multiple

number of speakers in series. In doing so, you would simply connect

1 pair of outputs to each speaker and daisy chain to subsequential

speaker/s. If you don’t intend to daisy chain the speakers, set the

default setting to 8 ohms. (See Diagram 3)

AP850 / AP660 / AP650 / AP640

AP640T / AP550T / AP525

AP520 / AP520T / AP400

(Red = Positive / Black = Negative)

AP520

AP550TT

Connect Left channel set

Connect Right channel set

Diagram 3

L/R Pair Speaker Single - Stereo

AP550TT

AP850

Patio Speakers AP670

AP640 AP550TT

AP520T

AP525

Speaker Type:

Tweeter:

Woofer:

Impedance:

Sensitivity:

70V Tap: (optional)

Bass Port

Frequency Response:

Power Handling:

Dimensions: (H x W x D)

Unit o af Me sure:

8” Ultra Patio Speaker

2” Silk Dome

8” Polypropylene

8 Ω

90dB

40W, 30W, 25W,20W

Yes

37Hz-22kHz

200 Watts

15 ¾” x 11” x 10”

Pair

6 ½” Ultra Patio Speaker

1” Silk Dome

6 ½” Polypropylene

8 Ω

90dB

N/A

Yes

44Hz - 22kHz

120 watts

14 ” x 8 ¼” x 7 ”

Pair

AP650TT

6 ” Single Stereo Patio Speaker

1” Silk Dome

6 ” Waterproof Paper Cone

8 Ω x 2 (stereo) 16Ω (mono)

90dB

N/A

Yes

44Hz - 22kHz

120 watts

14” x 8” x 8”

Each

6 ½” High Performance

Patio Speaker

1” Silk Dome

6 ½” Polypropylene

8 Ω

89dB

4W, 8W, 16W, 30W

39Hz - 20kHz

150 watts

11 ½” x 8 ” x 7 ”

Pair

5 ¼” High Performance

Single Stereo Patio Speaker

Dual 1” Silk Dome

5 ¼” Polypropylene

8 Ω

90dB

N/A

37Hz - 22kHz

150 watts

11 ” x 7 ” x 7 ”

Each

5 ¼” High Performance

Patio Speaker

1” Silk Dome

5 ¼” Polypropylene

8 Ω

90dB

2.5W, 5W, 10W, 15W, 20W

45Hz - 22kHz

120 watts

9 ” x 7 x 6 ”

Pair

5 ¼” High Performance

Patio Speaker

1” Silk Dome

5 ¼” Polypropylene

8 Ω

88dB

4W, 8W, 16W, 30W

45Hz - 22kHz

120 watts

9 ¼” x 7 ” x 6 ”

Pair

AP650

6 ½” Ultra Patio Speaker

1” Silk Dome

8 Ω

90dB

2.5W, 5W, 10W, 15W

Yes

37Hz - 22kHz

150 watts

12” x 7 ” x 8 ”

Pair

Patio Speakers

Speaker Type:

Patio Speakers

Speaker Type:

Tweeter:

Woofer:

Impedance:

Sensitivity:

70V Tap: (optional)

Frequency Response:

Power Handling:

Dimensions: (H x W x D)

Unit o asure: f Me

Tweeter:

Woofer:

Impedance:

Sensitivity:

70V Tap: (optional)

Frequency Response:

Power Handling:

Dimensions: (H x W x D)

Unit o asure: f Me

AP840

8” High Performance

1” Silk Dome

8” Polypropylene

8 Ω

90dB

N/A

Yes

30Hz-22kHz

200 Watts

14 ¾" H x 11" W x 9 ¼" D

Pair

AP450

4” Ultra Patio

Patio Speaker

½”

4 ” Polypropylene

8 Ω

90dB

N/A

58Hz - 22kHz

100 watts

7 ¾” x 5 ¼” x 4 ¼”

Pair

Mylar Dome

OSD Audio • 775 Columbia St. • Brea • CA • 92821 • www.osdaudio.com • Tel (562) 697-2600

Product specificaties

Merk:	OSD Audio
Categorie:	Speaker
Model:	AP640
Kleur van het product:	Wit
Gewicht:	- g
Breedte:	217.48 mm
Diepte:	188.91 mm
Hoogte:	292.1 mm
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	150 W
Equalizer-instellingen:	Nee
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Geschikt voor buitengebruik:	Ja
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Floor, Tabletop/bookshelf, Wall-mountable
Aantal drivers:	1
Woofer:	Ja
Frequentiebereik:	39 - 20000 Hz
Gevoeligheid:	89 dB
Luidspreker soort:	5-weg
Versterker:	Ingebouwd
Diameter woofer:	6.5 "
Aantal woofer drivers:	1
Diameter hogetonenluidspreker:	1 "
Aantal tweeter drivers:	1
Tweeter:	Ja
Versterker klasse:	A/B