Opticon OPN-3002i Handleiding

Opticon Barcode lezer OPN-3002i

Lees hieronder de 📖 handleiding in het Nederlandse voor Opticon OPN-3002i (4 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

OPN3002i Bluetooth Quick Start Guide

OPN3002i

Function Key

Feedback LED

USB Connector (Data/Charging)

Feedback Buzzer

Trigger Key

2D Imager

USB Data

Enabled

Disabled

SPP

(Serial Port Profile)

HID (Most Common)

(Human Interface Device)

Bluetooth Mode

Apple MFi

(Made for iDevice)

Note: Apple MFi mode requires the OPNTerm application which is available for download from the Apple App Store.

Bluetooth Options

• Bluetooth-HID - This connection mode is the most common and is normally supported by host devices

(computers, tablets and smartphones). Bluetooth-HID mode works as if a Bluetooth keyboard were

attached to the host device. This means that all data scanned will be as if typed. It is important that

there is a blinking cursor ready to accept your scanned data. Any text field is a valid place to scan a

barcode.

• Bluetooth-SPP - This connection mode can be complicated and is only recommended for advanced

users or users who have a dedicated application that manages connections to the scanner. It may also

be necessary when pairing with host devices that do not support Bluetooth-HID mode (such as most

older BlackBerry and Android devices). In this case, you may wish to download and install Opticon’s

wedge application (OpticonRL) from our website (see below).

• Apple MFi - This Bluetooth mode is a serial connection mode similar to Bluetooth-SPP though in a

proprietary format devised by Apple. It allows two-way communication with the scanner from an iOS

application that implements Opticon’s iOS SDKs (an example of which is called OPNTerm which can be

downloaded from the Apple App Store). The associated APIs allow iOS developers to create their own

OPN3002i applications or integrate the OPN3002i into their existing application.

Feedback Options

• Vibrate Only - The OPN3002i will only vibrate to alert the operator of a successful scan.

• - The OPN3002i will only beep to alert the operator of a successful scan.Beeper Only

• Beeper & Vibrate - The OPN3002i will both beep and vibrate to alert the operator of a successful scan.

Bluetooth Disconnect / Reconnect

• When connected, a Bluetooth connection can be broken by holding the trigger key for 5 seconds. This

will prolong battery life in some situations.

• When disconnected, a Bluetooth connection can be reestablished by holding the trigger key for 5

seconds. Barcode data stored when disconnected will be automatically transmitted.

Feedback

Beeper Only

Vibrate Only

Beeper & Vibrate

USB Data Options

• Enabled (Default) - This feature allows the data stored on the OPN3002i to

be transferred to an attached computer. Data is stored when the Bluetooth

connection goes out of range or is otherwise interrupted. Stored data is

automatically transmitted to the host device upon reestablishing the

Bluetooth connection. The Bluetooth connection mode also determines

the USB connection mode. Bluetooth-SPP and Apple MFi modes will

connect as USB-VCP (serial port) devices while Bluetooth-HID mode will

result in an USB-HID (keyboard) connection.

• Disabled - In this mode, the USB connector is used only to charge the

OPN3002i.

iOS Keyboard Options

• iOS On - This mode is a companion mode to Bluetooth-HID and is intended

for use with any Apple iDevice (iPhone, iPad and iPod) that has an on-

screen keyboard. When this feature is enabled, the on-screen keyboard

can be toggled on and off by use of the function key on the OPN3002i. The

typical behavior for an iDevice is to hide the on-screen keyboard when a

Bluetooth keyboard is paired (as the OPN3002i effectively is). Note that

this feature is not used in Apple MFi mode.

iOS Keyboard Options

iOS On

Defaults

Reset

OPNTerm

App Web Address

Product specificaties

Merk:	Opticon
Categorie:	Barcode lezer
Model:	OPN-3002i
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	57 g
Breedte:	36 mm
Diepte:	21.5 mm
Hoogte:	83 mm
Soort:	Draagbare streepjescodelezer
Materiaal behuizing:	ABS kunststof
Internationale veiligheidscode (IP):	IP42
LED-indicatoren:	Ja
Capaciteit van de accu/batterij:	600 mAh
Frequentie van processor:	96 MHz
RAM-capaciteit:	0.096 MB
Bluetooth-versie:	2.1+EDR
Connectiviteitstechnologie:	Bedraad en draadloos
Type stroombron:	Batterij/Accu
Meegeleverde kabels:	USB
Waarschuwingssignaal:	Ja
Certificering:	IEC 62471-1:2006\r\nEN60950-1:2005, \r\nIEC60950-1:2006\r\nEN55022, EN55024, FCC Part 15 Subpart C
Aantal toetsen:	2 toetsen
Type beeldsensor:	CMOS
Intern geheugen:	1 MB
Type processor:	32-bit CISC
Temperatuur bij opslag:	-20 - 60 °C
Ondersteunde streepjescodes (1D):	Code 11, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), JAN, MSI, Plessey, Telepen, U.P.C.
Standaard interfaces:	Bluetooth, USB
Soort scanner:	1D/2D
Levensduur batterij:	10 uur
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 85 procent
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Pitch lees-hoek:	-50 - 50 °
2D ( matrix en gestapeld ) barcodes ondersteund:	Aztec Code, Codablock, Data Matrix, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code
Tilt lees-hoek:	-90 - 90 °
Werkafstand:	124.8 mm
Bewegingstolerantie (cm/s):	200