Onkyo FR-N3X Handleiding

Onkyo CD-spelers/recorder FR-N3X

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo FR-N3X (72 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/72

CD/MD TUNER AMPLIFIER

FR-N3X

Instruction Manual

Thank you for purchasing the Onkyo CD/MD TUNER

AMPLIFIER.

Please read this manual thoroughly before making

connections and turning on the power.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

pleasure from your new CD/MD TUNER

AMPLIFIER.

Please retain this manual for future reference.

Contents

Before Using

Preparations

Connecting

Basic Operation

Advanced Operation

Additional Operation

PORTABLE CART WARNING

S3125A

Important Safeguards

1. Read Instructions – Read all safety and operating instruc-

tions before operating the appliance.

2. Retain Instructions – Retain the safety and operating

instructions for future reference.

3. Heed Warnings – Heed all warnings on the appliance and

in the operating instructions.

4. Follow Instructions – Follow all operating and usage

instructions.

5. Cleaning – Unplug the appliance from the wall outlet before

cleaning. The appliance should be cleaned only as recom-

mended by the manufacturer.

6. Attachments – Attachments not recommended by the

manufacturer may create hazards. Use only recommended

attachments.

7. Water and Moisture – Do not use the appliance near water

–for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool,

and the like.

8. Accessories – Do not place the appliance on an unstable

cart, stand, tripod, bracket, or table.The appliance may fall,

causing serious injury to a child or adult, and serious dam-

age to the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the appliance. Any mounting of the appliance should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the

manufacturer.

9. Move appliance and cart combinations

with care. Quick stops, excessive force,

and uneven surfaces may cause the

appliance and cart combination to over-

turn.

10. Ventilation – Slots and openings in the

cabinet are provided for ventilation and to ensure reliable

operation of the appliance and to protect it from overheat-

ing. Do not block or cover these openings by placing the

appliance on a bed, sofa, rug, or other similar surface. Do

not place the appliance in a built-in installation such as a

bookcase or rack unless proper ventilation is provided.

There should be free space of at least 20 cm (8 in.) and an

opening behind the appliance.

11. Power Sources – The appliance should be operated only

from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home,

consult your appliance dealer or local power company.

12. Grounding or Polarization – The appliance may be

equipped with a polarized alternating current line plug (a

plug having one blade wider than the other). This plug will ﬁt

into the power outlet only one way. This is a safety feature. If

you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fails to ﬁt, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

13. Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them. Pay particular atten-

tion to cords at plugs, convenience receptacles, and the

point at which they exit from the appliance.

14. Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the appliance, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANSI/

NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna-discharge unit, size of

grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode. See Figure 1.

15. Lightning – For added protection for the appliance during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and dis-

connect the antenna or cable system. This will prevent dam-

age to the appliance due to lightning and power-line surges.

16. Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to avoid touching such power

lines or circuits as contact with them can be fatal.

17. Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of ﬁre or electric shock.

18. Object and Liquid Entry – Never push objects of any kind into

the appliance through openings as they may touch dangerous

voltage points or short-out parts, resulting in a ﬁre or electric

shock. Never spill liquid of any kind on the appliance.

19. Servicing – Do not attempt to service the appliance your-

self as opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualiﬁed service personnel.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“ ” ’dangerous voltage within the product s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

20. Damage Requiring Service – Unplug the appliance form

the wall outlet and refer servicing to quali ed service per-ﬁ

sonnel under the following conditions:

A. When the power-supply cord or plug is damaged

B. If liquid has been spilled, or objects have fallen into the

appliance

C. If the appliance has been exposed to rain or water

D. If the appliance does not operate normally as per the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and

will often require extensive work by a quali ed technician ﬁ

to restore the appliance to its normal operation.

E. If the appliance has been dropped or damaged in any

way, and

F. When the appliance exhibits a distinct change in perfor-

mance this indicates a need for service.–

21. Replacement Parts – When replacement parts are

required, be sure the service technician has used replace-

ment parts speci ed by the manufacturer or that have theﬁ

same characteristics as the original part. Unauthorized sub-

stitutions may result in re, electric shock, or other hazards.ﬁ

22. Safety Check – Upon completion of any service or repairs

to the appliance, ask the service technician to perform

safety checks to determine that the appliance is in proper

operating condition.

23. Wall or Ceiling Mounting – The appliance should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

24. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other

appliances (including ampli ers) that produce heat.ﬁ

25. Liquid Hazards – The appliance shall not be exposed to

dripping or splashing and no objects lled with liquids, suchﬁ

as vases shall be placed on the appliance.

FIGURE 1:

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE, ANSI/NFPA 70

Precautions

1. Recording Copyright

Recording of copyrighted material for other than personal use

is illegal without permission of the copyright holder.

2. AC Fuse

The fuse is located inside the chassis and is not user-service-

able. If power does not come on, contact your Onkyo autho-

rized service station.

3. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to

country or region. Be sure that the power supply voltage of the

area where this unit will be used meets the required voltage

(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear

panel.

Setting the STANDBY button to standby mode does not shut

off the power completely.

4. Do not touch this unit with wet hands.

Do not handle this unit or power cord when your hands are wet

or damp. If water or any other liquid enters the case, take this

unit to an authorized service center for inspection.

5. Location of this unit

Place this unit in a well-ventilated location.

Take special care to provide plenty of ventilation on all sides of

this unit especially when it is placed in an audio rack. If ventila-

tion is blocked, this unit may overheat and malfunction.

Do not expose this unit to direct sunlight or heating units as

this unit's internal temperature may rise and shorten the life of

the pickup.

Avoid damp and dusty places and places directly affected by

vibrations from the speakers. In particular, avoid placing the

unit on or above one of the speakers.

Be sure this unit is placed in a horizontal position. Never place it

on its side or on a slanted surface as it may malfunction.

Do not place this unit near tuners or TV sets.

If placed next to a TV or tuner, it may cause reception interfer-

ence resulting in some noise in the TV or tuner output.

6. Care

From time to time you should wipe the front and rear panels

and the cabinet with a soft cloth. For heavier dirt, unplug the

power cord from the AC outlet, dampen a soft cloth in a weak

solution of mild detergent and water, wring it out dry, and wipe

off the dirt. Following this, dry the unit immediately with a

clean cloth.

Do not use rough material, thinners, alcohol or other chemical

solvents or cloths since these could damage the nish or ﬁ

remove the panel lettering.

7. Points to remember

If this unit is brought from a cold environment to a warm one or

is in a cold room that is quickly heated, condensation may

form on the pickup, preventing proper operation. In this case,

remove the disc and leave the power ON for about one hour to

remove the condensation.

When transporting this unit, be careful not to bump it.

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE–

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

S2898A

US and foreign patents licensed from Dolby Laboratories

Licensing Corporation.

“CLASS 1 LASER

PRODUCT”

This unit contains a semiconductor laser system and is classified as a CLASS 1 “

LASER PRODUCT.” To use this model properly, read this Instruction Manual

carefully. In case of any trouble, please contact the store where you purchased the

unit. To prevent being exposed to the laser beam, do not try to open the enclosure.

DANGER:

INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR

DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

This unit is a CLASS 1 LASER PRODUCT

and employs a laser inside the cabinet.

To prevent the laser from being exposed,

do not remove the cover. Refer servicing to

qualified personnel.

This label on the left hand panel states that:

Product specificaties

Merk:	Onkyo
Categorie:	CD-spelers/recorder
Model:	FR-N3X

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo FR-N3X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CD-spelers/recorder Onkyo

Onkyo CR-325 Handleiding

30 April 2023

Onkyo C-705X Handleiding

19 April 2023

Onkyo DXC390B Handleiding

5 April 2023

Onkyo DX-R700 Handleiding

3 April 2023

Onkyo CDR-205X Handleiding

24 Maart 2023

Onkyo DX-7222 Handleiding

19 Maart 2023

Onkyo C-7030(S) Handleiding

15 Maart 2023

Onkyo C-1VL Handleiding

26 Februari 2023

Onkyo C-707CHX Handleiding

26 Februari 2023

Onkyo C-701A Handleiding

20 Februari 2023

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

Marantz SA-17S1 Handleiding

15 November 2024

Klipsch PD-10AE Handleiding

13 November 2024

Rotel Michi Q5 Handleiding

3 November 2024

Reflexion PCD520MF Handleiding

29 September 2024

Auna Reference 802 Handleiding

24 September 2024

Advance X-CD1000 EVO Handleiding

11 September 2024

Shanling EC mini Handleiding

7 Augustus 2024

Shanling CD80 Handleiding

7 Augustus 2024

Shanling SCD1.3 Handleiding

7 Augustus 2024

Shanling ET3 Handleiding

7 Augustus 2024