Omnitronic QI-5T Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Omnitronic QI-5T (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
ENGLISH
Stand
www.lg.com
Copyright Β© 2022 LG
Electronics Inc.
All Rights Reserved.
OWNER’S MANUAL
Please read this manual carefully
before operating your set and
retain it for future reference.
SQ-G2ST55
SQ-G2ST65
SQ-G2ST8377
The model and serial number
of the product are located on
the back and on one side of the
product. Record them below in
case you ever need service.
Model
Serial No.
*MFL718723202205REV01*
2
* Image shown may differ from your
product.
Safety instructions
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Please read these safety precautions
carefully before using the product.
β€’ξ˜ƒ When lifting or moving the
product, at least two people
are required due to the heavy
weight of the product.
- The product may fall down,
causing a malfunction or
injury.
β€’ξ˜ƒ Do not let children hang on or
climb onto the product.
- The product may fall down,
causing an injury or even
death.
β€’ξ˜ƒ Do not install the product in
a place which is unstable or
vibrating or a place where
the product is not completely
supported such as a shaky shelf
or a tilted place.
- The product may fall down or
overturn, causing an injury or
malfunction.
β€’ξ˜ƒ Put the product on a flat and
firm floor.
β€’ξ˜ƒ When moving or handling a
product assembled with the
Stand, be cautious about
damaging the exterior of the
product.
β€’ξ˜ƒ When there is a stain or
fingerprint left on the surface,
wipe it off gently.
- When removing a stain, do
not use excessive force.
Wiping with excessive force
may cause scratches or
discoloration on the product.
3
Assembling and Preparing
Accessories
x 4
(M4 x L20)
(Only SQ-G2ST55, SQ-G2ST65)
(Only SQ-G2ST8377)
How to Assemble the Stand
β€’ξ˜ƒ When assembling the stand,
put the product on a table
or a flat floor with its screen
facing downward. Here, first
put a soft and fluffy cloth
on the place, and then put
the product on top of it to
prevent the screen from being
damaged.
β€’ξ˜ƒ When assembling the stand,
check if the screws are
completely fastened. (If they
are not completely fastened,
the product may lean forward
after being installed.) Avoid
fastening the screws with
excessive force because
otherwise the joint part of the
screws may be worn out, and
the screws might come off.
β€’ξ˜ƒ When assembling the
product, do not use foreign
substances (oil, lubricant,
etc.) on the screws.
- It may cause damage to
the product.
β€’ξ˜ƒ Before installing a wall mount
support, disassemble the
Stand by conducting the
method to assemble the
stand in a reverse order.


Product specificaties

Merk: Omnitronic
Categorie: Speaker
Model: QI-5T

Heb je hulp nodig?

Als je hulp nodig hebt met Omnitronic QI-5T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Omnitronic

Handleiding Speaker

Nieuwste handleidingen voor Speaker