Omega Speedmaster HB-SIA Handleiding

Omega Horloge Speedmaster HB-SIA

Lees hieronder de 📖 handleiding in het Nederlandse voor Omega Speedmaster HB-SIA (2 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

1 / 2

SPEEDMASTER

HB-SIA CO-AXIAL GMT CHRONOGRAPH NUMBERED EDITION 44.25MM

Titanium on titanium

Caliber

3603 321.90.44.52.01.001

VCo-Axial escapement

lAutomatic

UChronometer

iTime zone function

jSecond time zone

ZTachymeter

oSapphire crystal

tAnti-reﬂective treatment on both sides

CNumbered Edition

G3-year International Warranty

TWater-Resistant to a relative pressure of 10 bar

(100 metres/330 feet)

WATCH FUNCTIONS

The crown has 3 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 55 hours or more, wind it

up with the crown in position 1.

2. Setting the time zone and correcting the date: pull the crown out to position

2. Turn the crown forwards or backwards, and only the hour hand will move

forwards or backwards by 1-hour intervals. By passing the hour hand over

midnight, the date can be changed forwards or backwards. Push the crown back

to position 1.

Synchronisation of the hour hand and the ’24-hour’ hand

Pull the crown out to position 2 and turn it to synchronise the hour hand with the

time indicated by the ’24-hour’ hand on the 24-hour scale in the centre of the

dial. Make sure you set the hour hand in the correct half of the day!

After synchronising the hour hand with the ’24-hour’ hand, you must set the local

time on your watch. Push the crown back to position 1.

3. Time setting: 24 hours - hours – minutes – seconds. Pull the crown out to

position 3. The seconds hand will stop. Turn the crown forwards or backwards.

Synchronise the seconds by pushing the crown back to position 1 to coincide with

a given time signal.

SECOND TIME ZONE

Thanks to the ’24-hour’ hand with its triangular point, travellers can read the time

back home at a glance on the 24-hour scale at the centre of the dial.

2 / 2

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc.

Timing to 1/8 of a second for up to 12 hours.

• Pusher B: reset (after a stop).

Note: resetting/zeroing of the sub dials must only be carried out after the

chronograph has stopped. Never push the chronograph’s two pushers (A and B)

simultaneously.

TACHYMETRIC SCALES

The desired information is read between the central seconds hand of the

chronograph and the corresponding scale, over a maximum duration of 60

seconds.

Example: calculating the speed of a car.

Record the time the car takes to cover a distance of 1 kilometre. Read off the

tachymetric scale the speed indicated by the central seconds hand. In this case,

the car is travelling at 120 km/h.

Product specificaties

Merk:	Omega
Categorie:	Horloge
Model:	Speedmaster HB-SIA
Type horloge:	Horloge
Mechanismetype:	Mechanical (auto winding), Mechanical (hand winding)
Chronograaf:	Ja
Chronometer:	Ja
Type wijzerplaat horloge:	Analoge wijzerplaat
Waterdicht:	Ja
Waterbestendig druk:	10 ATM
Waterbestendig diepte:	100 m
Klokmodus:	24 uur
Horlogekast materiaal:	Titanium
Kleur behuizing:	Black, Dark metallic
Band materiaal:	Titanium
Hoofdkleur van band:	Donker metallic
Glas type van horloge:	Kristal
Hoesvorm:	Rond
Krasbestendig glas:	Ja
Hoofdkleur van wijzerplaat:	Zwart
Geslacht:	Man
Stijl becijfering horloge:	Arabische cijfers
Kleur becijfering horloge:	Wit
Energiereserve:	52 uur
Antireflecterende coating:	Ja
Kastdiameter:	44.25 mm
Tachymeter:	Ja
Fabrikant beweging:	Omega
Model beweging:	3603
Coaxiaal echappement:	Ja