Olympus VN-1100PC Handleiding
Olympus
Voice recorder
VN-1100PC
Lees hieronder de đź“– handleiding in het Nederlandse voor Olympus VN-1100PC (2 pagina's) in de categorie Voice recorder. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
BZ8174-02-INST-E1 2006.06.30
sYou can switch the time indication between the 12-hour system and the 24-hour system by pressing the
DISPLAY/MENU button while you are setting the hour or minute.
sYou can change the order of the date indication by pressing the DISPLAY/MENU button while you are
setting the year, month, or day.
(Example: June 14, 2006)
-
2
- -
4
--
5
-
4Hold
Set the HOLD switch to the HOLD position.
All operation buttons are disabled. This feature is
useful when the recorder has to be carried in a
handbag or pocket.
Remember to reset the HOLD switch before
attempting to use the recorder.
Notes
sThe alarm will sound at the scheduled time even if
the recorder is set to HOLD. The recorder will then
begin to play the file associated with the alarm once
you press any button (Excluded VN-1100/VN-
1100PC).
sThe recorder functions as follows with the HOLD
switch set to the HOLD position:
–If the recorder is playing, the display goes dark
when playback of the current file has completed.
–
If the recorder is recording, the display goes dark
when the recorder stops recording automatically
upon running out of free memory.
E1-BZ8174-02
AP0607
Current folder
-
3
-
4To Pause Recording
To Pause
Press the REC button during recording.
➥“PAUSE” appears on the display and the record/play indicator
light flashes.
To Resume Recording
Press the REC button again.
➥Recording will resume at the point of interruption.
Notes
sIf “FULL” appears on the display, you cannot record in the selected folder. In such a case, erase
unnecessary files or download to PC (VN-1100PC/VN-2100PC/VN-3100PC).
sIf the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations.
Put a notebook or other item between the table and the recorder so that the vibration is not easily
transmitted for clearer recording.
sEven if you press the DISPLAY button, the display will not change to current recording time if the
remaining recording time is 5 minutes or less.
sWhen remaining recording time falls to 1 minute or less, the Record/play indicator light flashes red.
sThe recorder will enter Stop mode if it has been left paused for 60 minutes or longer.
sIn case of difficult acoustic conditions or low speaker’s voice, recording in XHQ or HQ is recommended.
Also, usage of an external microphone (sold separately) could improve the quality of recordings.
sThe input level cannot be adjusted on this recorder. When you connect the recorder to an external
device, execute a test recording and adjust the output level of the external device.
1
Lightly press down on the
arrow and slide the battery
cover open.
2
Insert two size-AAA alkaline
batteries, observing the correct
polarity.
3
Close the battery cover
completely.
Time/Date screen appears. The hour
indicator flashes, indicating the start of the
Time/Date setup process. (See “Setting
Time/Date (TIME)” for details)
An optional Ni-MH Rechargeable Battery (BR401) from Olympus can be used for the recorder.
Replacing Batteries
When appears on the display, replace the batteries as soon as possible. Size-AAA alkaline
batteries are recommended. When the batteries are depleted, appears on the display, and the
recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace
batteries to maintain the current settings (Time/Date, etc.). For your convenience,the recorder also
logs the current settings in nonvolatile memory at hourly intervals.
4Inserting Batteries
1
Press and hold the MENU
button for 1 second or longer.
2
Press the + or – button until
“TIME” flashes on the
display.
3
Press the PLAY button.
The hour indicator flashes.
4
Press the + or – button to set
the hour.
5
Press the PLAY or 9
button to accept the minute.
The minute indicator flashes.
Pressing the 0 button enables the hour
setting again.
6
Press the + or – button to set
the minute.
Repeat steps 5 and 6 to continue to set
the year, month and date in the same way.
7
After setting the date, press
the PLAY or 9 button.
This completes the time/date setup
procedure.
4Setting Time/Date (TIME)
If you have set the time and date, information as to when a sound file was recorded is
stored automatically with that file.
When you install batteries for the first time or each time you replace the batteries, the
hour indication will flash. In such a case, be sure to set the time and date by following
steps 4 through 7 described below.
4Notes on the Folders
The recorder provides four folders, A, B, C, and D (D is for VN-2100/
VN-2100PC/VN-3100/VN-3100PC only).
To change the folder selection, press the FOLDER button while the
recorder is stopped. Each recorded file is stored in a folder. Using folders
to classify files makes it convenient to find files you want to access
later. Up to a total of 100 files can be recorded in each folder.
4
Recording from External Microphone or Other Devices
The external microphone and other devices can be connected and
the sound can be recorded.
sWhen the external microphone is connected to the microphone jack of the
recorder, the built-in microphone will not operate.
sWhen using an external microphone, choose adequate microphone, such as a
Noise-Cancellation microphone or Electret condenser microphone (optional).
sWhen connecting an external equipment, use the connecting cord KA333 (optional).
-
1
-
4How to Use the
Strap
4Power Supply
The HOLD switch functions as a power button. When you
do not use the recorder, set the HOLD switch to the HOLD
position while the recorder is stopped. This will power off
the recorder and minimize the battery drain.
Power on…Reset the HOLD switch.
Power off…Set the HOLD switch to the HOLD position.
Standby Mode and Display Shut Off
If the recorder is stopped or paused for 60 minutes or longer during recording or play back,
it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode
and turn on the display, press any button.
Earphone jack
Microphone jack
Strap hole
4LCD Display Information
You can select an option for the display of the recorder. This help review and confirm different
recorder settings and file information.
RecordingGetting Started Playing Back
1
Press the FOLDER button to
select the desired folder.
2
Press the 9 or 0 button
to select the file to play back.
3
Press the PLAY button to
start playback.
The Record/play indicator light turns
green, and the elapsed playing time is
indicated on the display.
4
Press the + or – button to select
the proper sound volume.
The display shows the volume level. You
can choose between 0 to 30.
1
Press the FOLDER button to
select the desired folder
2
Press the REC button to start
recording.
The Record/play indicator light turns red,
and recording starts.
3
To stop recording, press the
STOP button.
New recordings are saved as the last file
in the folder.
4Identification of Parts
aCurrent folder
bCurrent recording
mode
cCurrent file number
dRecording time
eRemaining recording
time
b
c
A audio input
terminal of
other devices
bCurrent file number
cPlaying time
DIGITAL VOICE RECORDER
VN-3100/VN-3100PC
VN-2100/VN-2100PC
VN-1100/VN-1100PC
EN
INSTRUCTIONS
Thank you for purchasing an Olympus
Digital Voice Recorder.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we recommend that
you test the record function and volume before use.
Record/play indicator light
Display (LCD panel)
DISPLAY/MENU button
ERASE button
Hold switch
Built-in speaker
Battery cover
Built-in Microphone
REC (Record) button
STOP button
PLAY button 9 (Fast Forward) button
0 (Rewind) button
+ button
– button
4Canceling Playback
To Stop
Press the STOP button.
➥The recorder stops in the middle of the file being played.
To Resume Playback
Press the PLAY button again.
➥Playback will resume at the point of interruption.
s
The end of the file is located by pressing and holding the 9 button during fast forwarding. The recorder will
pause at the end of the file. If you do not release the 9 button, the recorder will continue fast forward.
s
The beginning of the file is located by pressing and holding the 0 button during rewinding. The recorder will
pause at the beginning of the file. If you do not release the 0 button, the recorder will continue rewinding.
sWhen the index mark is shown in the middle of a file, it will stop temporarily in the position of the index mark.
4Changing Playing Speed
You can change the playing speed by pressing the PLAY button while
the recorder is playing back.
sWhen the slow playback mode is selected, the “SLOW” appears and, for the fast playback mode,
“FAST” appears on the display while the recorder is playing back.
sThe recorder stops playing when you press the STOP button while playing back in the slow/fast mode,
or when it reaches to the end of the file. If you once press the STOP button and start playback again,
the recorder will play back files in normal speed as well.
4Locating the Beginning of the File
While the recorder is playing back or playing back in slow/fast mode, pressing the 9 or 0
button forwards or rewinds to the beginning of the next file or the file being played respectively. If an
index mark is encountered midway, playback begins at that point. (See “Index Marks” for details)
4Listening with Earphones
You can listen to files by connecting earphones to the earphone jack.
If an earphone is connected, the speaker doesn't emit sound. Sound will
be played back monaurally.
sTo avoid irritation to the ear, insert the earphone after turn down the volume level.
sWhen you listen with the earphone during playback, do not raise the volume too
much. It may cause hearing impairment and decrease in hearing ability.
*Earphones are not supplied. You can use any standard 3.5mm monaural earphone or headphone.
4Forwarding and Rewinding
Fast Forward
Press and hold the 9 button while playing a file.
➥When you release the 9 button, the recorder will resume
normal playback.
Rewind
Press and hold the 0 button while playing a file.
➥When you release the 0 button, the recorder will resume
normal playback.
Normal speed Slow playback
(-25%)
Fast playback
(+50%)
*PC (USB) terminal....
VN-1100PC/VN-2100PC/VN-3100PC
State of the
recorder
While in stop
mode
While in
record mode
While in stop
mode or
playback mode
Operation
Press and hold
the STOP button
Press the
DISPLAY button
Press the
DISPLAY button
Display
The total number of files recorded in the folder and
remaining recording time appears on the display.
The display switches between current recording time and
remaining recording time.
Playing time → Remaining playing time → Recording date
of the file → Recording time of the file → Playing time . . .
USB terminal*
For customers in North and South America
USA RFI
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Canadian RFI
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the Canadian Depart-
ment of Communications.
Cet appareil numérique ne dépasse pas les limites de Catégorie B pour les émissions de
bruit radio émanant d’appareils numériques, tel que prévu dans les Règlements sur
l’Interférence Radio du Département Canadien des Communications.
For customers in Europe
“CE” mark indicates that this product complies with the European
requirements for safety, health, environment and customer protection.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection
of waste electrical and electronic equipment in the EU countries. Please do not throw
the equipment into the domestic refuse. Please use the return and collection systems
available in your country for the disposal of this product.
Applicable Product : VN-3100/VN-3100PC/VN-2100/VN-2100PC/VN-1100/VN-1100PC
HOLD
*Strap is not supplied.
Use the optional accessory.
a
b
c
d
e
a
aCurrent folder
FOLDER/INDEX button
BZ8174-02-INST-E1 2006.06.30
-
6
--
7
--
8
--
9
--
10
-
Erase
1
Press the FOLDER button
to select folder.
2
Press the 9 or 0
button to select the file to
be erased.
3
Press the ERASE button.
4
Press the 9 or 0
button to select the “YES”.
5
Press the PLAY button.
4Erasing
You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.
Erasing One File at a Time
Erase All Files from a Folder
Other Functions
sThe recording time shown above is for one continuous file. The available recording time may be shorter
than specified if several files are recorded. (Use the remaining time and recorded time only as references.)
4Recording Modes (XHQ HQ SP LP)
The recording mode can be chosen from XHQ (extra high quality
sound recording) and HQ (high quality sound recording), SP
(standard recording), and LP (long-term recording).
In Menu mode selection... XHQ, HQ, SP, LP
Notes
sAn erased file cannot be restored.
sIf operation is not executed for 8 seconds during the setting, it will return to the stop
status.
sCompletion of erasing may take several seconds.
Do not attempt to remove, replace battery or attempt any other functions on the voice
recorder during this period because
data may be corrupted.
1
Press and hold the MENU
button for 1 second or longer
while the recorder is stopped.
2
Press the + or – button to
select what you would like to
set up.
The selected menu item flashes.
3
Use the 9 or 0 button
to change the setting.
4
Press the PLAY button to
confirm the setting.
5
Press the STOP button to
close the menu.
4Basic Operation of the Menu Mode
Using the menu function, you can change various settings according to your preference.
Menu
4
Using The Variable Control Voice Actuator (VCVA)
When the microphone senses that sounds has reached a preset volume,
the built-in Variable Control Voice Actuator (VCVA) starts recording
automatically, and stops it when the volume drops.
Particularly helpful for extended recording, the VCVA not only conserves
memory by turning off recording during silent periods, but also makes
playback more efficient and convenient.
In Menu mode selection... On, OFF
sDuring recording, use the + and – buttons to adjust the VCVA level in 15 levels.
sThe Record/play indicator light is lit during recording. When the recorder is in
Standby mode, the Record/play indicator light flashes and “VCVA” flashes on
the display.
4Index Marks
Index marks can be placed in a file during recording or playback to
provide and quick and easy way of keeping track of important sections
in the file.
1Press the INDEX button during recording (pause recording)
or playback to set an index mark.
An index number appears on the display.
Clearing an Index Mark
Press the ERASE button while the index number appears on the display.
sUp to 10 index marks can be set in a file.
sSequential index marks numbers are reassigned automatically.
4Microphone Sensitivity (HI LOW)
Microphone sensitivity is adjustable to meet your recording needs.
In Menu mode selection... HI, LOW
HI: High-sensitivity mode that records sounds in all directions.
LOW: Low-sensitivity mode suited for dictation.
sTo ensure successful recording, make a test recording to choose appropriate
microphone sensitivity before recording.
sIf you choose “HI”, we recommend setting the recording mode to XHQ or HQ to
best take advantage of the higher sensitivity.
s
If you choose “HI”, background noise may be high depending on the recording conditions.
4Timer Recording (TIMER)
(Excluded VN-1100/VN-1100PC)
You can schedule for automatic recording, specifying the start time
and end time of recording. When the timer-controlled recording
completes, the setting is released.
In Menu mode selection... SET, On, OFF→After selecting SET, press
the PLAY button to set the time.
4System Sounds (BEEP)
The recorder beeps to alert you to button operations or warn you of
errors. System sounds may be turned off.
In Menu mode selection... On, OFF
s
If the alarm playback function has been set, the alarm will sound at the scheduled
time even if the system sounds are disabled (Excluded VN-1100/VN-1100PC).
Batteries
Warning
•Batteries should never be exposed to flame, heated, short-circuited or disassembled.
•Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.
•Never use any battery with a torn or cracked outer cover.
•Keep batteries out of the reach of children.
•If you notice anything unusual when using this product such as abnormal noise, heat,
smoke, or a burning odor:
1remove the batteries immediately while being careful not to burn yourself, and;
2call your dealer or local Olympus representative for servicing.
Troubleshooting
Q1 Nothing happens when a button is pressed.
A1 • The HOLD switch may be set to HOLD.
•The batteries may be depleted.
•The batteries may be inserted incorrectly.
Q2 No sound or quiet sound is heard from the speaker while playing back.
A2 • The earphone plug may be plugged into the recorder.
•The volume may be set to the minimum level.
Q3 Recording is not possible.
A3 By pressing the STOP button repeatedly while the recorder stops, check if the
display shows:
•
The remaining recording time in the selected folder may have reached“00:00”.
•The number of files is 100.
Check if the display shows “FULL” by pressing the REC button.
Q4 The playback speed is too fast (slow).
A4 The recorder may be set to Fast (slow) Playback.
Specifications
Recording medium: Built-in flash memory
Overall frequency response: XHQ mode 300 to 7,200 Hz
HQ mode 300 to 7,200 Hz
SQ mode 300 to 5,400 Hz
LP mode 300 to 3,100 Hz
Recording time: VN-3100/VN-3100PC: 128 MB
XHQ mode: Approx. 5 hours 40 minutes
HQ mode: Approx. 11 hours 40 minutes
SP mode: Approx. 23 hours 30 minutes
LP mode: Approx. 71 hours 40 minutes
VN-2100/VN-2100PC: 64 MB
XHQ mode: Approx. 2 hours 50 minutes
HQ mode: Approx. 5 hours 50 minutes
SP mode: Approx. 11 hours 40 minutes
LP mode: Approx. 35 hours 50 minutes
VN-1100/VN-1100PC: 32 MB
XHQ mode: Approx. 1 hour 25 minutes
HQ mode: Approx. 2 hours 50 minutes
SP mode: Approx. 5 hours 50 minutes
LP mode: Approx. 17 hours 50 minutes
Microphone: Electret Condenser Microphone (monaural)
Speaker: Built-in ø 28 mm round dynamic speaker
Maximum power: 120 mW
Earphone jack (monaural): ø 3.5 mm diameter, impedance 8 Ω
Microphone jack(monaural): ø 3.5 mm diameter, impedance 2 kΩ
Power supply: Two AAA (LR03 or R03) batteries or
Two Ni-MH rechargeable batteries
Continuous battery use time:
Alkaline batteries. 25 hours
Ni-MH rechargeable batteries: Approx. 15 hours
Dimensions: 102(L) Ă— 39 (W) Ă— 19.5 (T) mm
Weight: 63 g (including battery)
*
Battery life is measured by Olympus. It varies greatly according to the type of batteries
used and the conditions of use.
*
Your recorded contents are for your personal use or pleasure only. It is prohibited to record
copyrighted material without permission of the copyright holders according to copyright law.
*Specifications and design are subject to change without notice for improvement of performance.
Accessories (Optional)
Ni-MH Rechargeable Battery Charger: BU-400 (Europe only)
Ni-MH Rechargeable Battery: BR401
Connecting cord (Earphone jack ↔ Microphone jack): KA333
Noise-Cancellation microphone: ME52
Electret condenser microphone: ME15
Dual monaural earphone: E20
Telephone pickup: TP7
Neck Strap: ST26
General Precautions
Read this manual carefully to ensure that you know how to operate it safely and correctly.
Keep this manual in an easily accessible location for future reference.
•The warning symbols indicate important safety related information. To protect yourself and oth-
ers from personal injury or damage to property, it is essential that you always read the warnings
and information provided.
Warning regarding data loss
Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction,
or during repair work. For important recorded content, we recommend you to write it down some-
where (for VN-1100/VN-2100/VN-3100) or make a back-up by downloading to a PC (for VN-1100PC/
VN-2100PC/VN-3100PC).
Any liability for passive damages or damage of any kind occurred due to data loss incurred by a
defect of the product, repair performed by the third party other than Olympus or an Olympus autho-
rized service station, or any other reasons is excluded from the Olympus’s liability.
1
Press the FOLDER button
to select folder.
2
Press the ERASE button
twice.
3
Press the 9 or 0
button to select the “YES”.
4
Press the PLAY button.
Menu setting screen Move the selection one position
up/increase the number.
Move the selection one position
down/decrease the number.
Move the selection
one position
to the left.
Move the selection
one position
to the right.
Confirm the setting
Notes
sThe recorder will stop if you leave it idle for 3 minutes during a menu setup operation,
when a selected item is not applied.
sIf you press the STOP button during a menu setup operation, the recorder will stop and
apply the items that were set to that point.
4Alarm Playback Function ( )
(Excluded VN-1100/VN-1100PC)
You can use the alarm playback function to sound the alarm tone for 5
minutes at the scheduled time. Within this 5 minutes, pressing any button
other than the HOLD switch starts the recorder to play back the pre-
selected file.
In Menu mode selection... SET, On, OFF→After selecting SET, press
the PLAY button to set the time.
With the alarm playback function, only one file can be played back.
Select a file for the function before setting the time.
To cancel an alarm playback
For in the menu mode, select OFF and press the PLAY button.
sRegardless of the selected folder, once the alarm playback is set, it operates every day unless the
setting is canceled.
sTo view the current setting, select On, and then press the PLAY button.
sThe alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts. The
file is not played back in this case.
sIf the recorder has no recorded file in the selected folder, the alarm playback function is not available.
sAlarm playback occurs every day unless it is set to OFF.
To cancel the timer setting
For the timer in the menu mode, select OFF, and then press the PLAY button.
sTo view the current setting, select On, and then press the PLAY button.
sWith this function, you can set only the start and the end time of recording. The current settings of the
recording mode, microphone sensitivity, VCVA and folder are applied for the settings before you set
timer-controlled recording.
sThe setting exceeding the remaining recording time is not allowed.
sYou can record at any time even it is not within the specified recording duration. However, if that makes
the remaining recording time insufficient for the timer-controlled recording, the recording will not complete.
sIf any operation is ongoing, the timer-controlled recording is overridden.
4Moving File Between Folders
(Excluded VN-1100/VN-1100PC)
You can move files recorded in folders A, B, C and D to other folders.
The moved file is added at to the end of the destination folder.
1Choose the file you want to transfer and press the PLAY button
to play it.
2Press and hold the MENU button for 1 second or longer
while the file is playing.
3Press the 9 or 0 button to choose a destination folder.
4Press the PLAY button.
The destination folder and the number of the moved file appear
on the display, and moving is completed.
s
If the destination folder is full (100 files), “FULL” appears on the display, and you
cannot move the file to that folder.
4Resetting the Recorder (CLEAR)
This function resets the current time and other settings to their initial
status. It is useful if you are having problems with the recorder, or if you
want to erase the entire memory of the recorder.
1Hold the STOP button, and hold the ERASE button for 3
seconds or longer.
2Press the 9 or 0 button to select the “YES”.
3Press the PLAY button.
s
If you leave the recorder untouched for 8 seconds or longer before you press the PLAY button in Step 3,
Clear mode will be canceled, and the recorder will enter Stop mode.
For safe And Correct Usage
•Do not leave the recorder in hot, humid locations such as inside a closed automobile
under direct sunlight or on the beach in the summer.
•Do not store the recorder in places exposed to excessive moisture or dust.
•Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.
•Do not place the recorder on top of or near electric appliances such as TVs or refrigerators.
•Avoid sand or dirt. These can cause irreparable damage.
•Avoid strong vibrations or shocks.
•Do not disassemble, repair or modify the unit yourself.
•Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart).
•Keep the unit out of the reach of children.
File to be erased
Folder to be erased
Microphone
sensitivity display
VCVA indicator
Alarm indicator
a
b
aDestination folder
bDestination
number of the file
XHQ HQ SP LP
Model Mode
Approx.1 hour 25 minutes Approx.2 hours 50 minutes
Approx.5 hours 50 minutes
Approx.17 hours 50 minutes
Approx.35 hours 50 minutes
Approx.11 hours 40 minutes
Approx.5 hours 50 minutes
VN-1100/
VN-1100PC
VN-2100/
VN-2100PC
Approx.2 hours 50 minutes
Current recording
mode
Approx.71 hours 40 minutes
Approx.23 hours 30 minutes
Approx.11 hours 40 minutes
VN-3100/
VN-3100PC
Approx.5 hours 40 minutes
Product specificaties
| Merk: | Olympus |
| Categorie: | Voice recorder |
| Model: | VN-1100PC |
Heb je hulp nodig?
Als je hulp nodig hebt met Olympus VN-1100PC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Voice recorder Olympus
7 Februari 2022
16 Augustus 2022
17 Augustus 2022
8 Februari 2022
17 Augustus 2022
7 Februari 2022
17 Augustus 2022
15 Augustus 2022
17 Augustus 2022
8 Februari 2022
Handleiding Voice recorder
- Voice recorder Sony
- Voice recorder Grundig
- Voice recorder Aiwa
- Voice recorder Mpman
- Voice recorder Zoom
- Voice recorder LifeGood
Nieuwste handleidingen voor Voice recorder
11 Juli 2023
12 Mei 2023
12 Mei 2023
4 Februari 2023
12 Mei 2023
4 Februari 2023
12 Mei 2023
5 Juli 2022
30 Augustus 2022
16 Augustus 2022