Newstar NS-431H Handleiding

Newstar Overige computer accessoire NS-431H

Lees hieronder de 📖 handleiding in het Nederlandse voor Newstar NS-431H (12 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Table of Content

Table of Contents

 Introduction

Overview………...…………………………………………..….1

Content….…………………………………………………..…..1

Features……………….………………………………………..2

 Installations

PC BIOS Notice.……………………………………………….3

Adhesive Rubber Feet.…………………………………….….4

Console Connection……………….……………………..…...4

Computers Connection………………………………….…….4

 Operations

Front Panel operation……………………………………...….7

OSD (On-Screen Display) Operation…………………….....8

Hot-Key Commands……………………………………….…13

 Cascade Configuration

Connection…………………………………………...…..…...16

Computer Selection…..……………………………..…..…...16

Sun Keyboard Mapping……………………...……….…….17

 Appendix

Speciﬁcations………………………………….………………18

Troubleshooting………………………..……...….…………..19

Please read this manual thoroughly and follow the

Installation procedures to prevent any damage to the NewStar

Switch or any connecting device.

This device is tested and complies with Part 15 of FCC/class B, CE

and VCCI rules.

-----------------

---------------------------------- Introduction

Overview

The hybrid USB and PS/2 KVM switches – NS431H, NS831HD, and

NS1631HD extend your computer management to either PS/2 and/or

USB models, or both from a single PS/2 console. With the

Sync-EmuTM Technology, the advanced NS831HD, and NS1631HD

are designed to meet the special requirements from USB-ready HP

Unit systems and Sun servers. Engineered for servers of the highest

level, the NS831HD, and NS1631HD guarantee flawless switching

with zero tolerance.

Installation is as easy as connecting USB A-B cables or PS/2 cables in

between computers and the NewStar switch. Selecting a computer is

as easy as front panel button pressing or by entering hotkey

commands. The innovated KVM technology ensures smooth switching

from one computer to the other and signal conversion from PS/2 to

USB. No more tangled cables and messy working environment; let the

NEWSTAR SWITCH switches do the computer switching for you.

NewStar Switch Content

KVM switch x 1

Power Adapter x 1

Foot Pad x 1 set

Bracket x 2 (optional)

User’s Manual x 1

PS/2 Y-Adapter x 4/6/12 for 4/8/16-port model

8-port KVM Switch configuration

Features

z Manage from 4 to 16 USB-enabled PCs, iMacs from one PS/2

keyboard, one mouse, and one monitor.

z For computer with USB or PS/2 interface.

z Front panel push-buttons for easy computer selection.

z Support keyboard and mouse Plug-and-Play.

z Buzzer sound for computer switching confirmation.

z High VGA resolution up to 1920*1440.

z Activate Auto Scan by front buttons pressing.

z USB specification compliant.

z Support the latest DDC2B VGA monitor.

z OSD menu for server naming and selection. (OSD Models only)

z Support USB-ready HP Unix and Sun servers. (OSD Models

only)

-----------------

---------------------------------- Installation

PC BIOS Notice

The following BIOS setup changes are necessary for PC users using

USB and not necessary for Mac users:

1. In STANDARD CMOS, set HALT ON ERROR to ALL BUT

KEYBOARD.

2. In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set

USB IRQ to ENABLED.

3. For newer computers: in INTEGRATED PERIPHERALS, set USB

CONTROLLER and KEYBOARD SUPPORT to ENABLED.

Also, make sure USB is properly selected in Device Manager under

Control Panel, as shown in Figure 1.

Figure 1: PC BIOS Notice

Note: For NS431H, switching from one computer to the other is

equivalent to unplugging the USB device from one computer

and plugging it to another. For certain computers neither

accept plug-and-play nor USB hub, the OSD models deal with

it by the advanced Sync-EmuTM Technology emulating USB

devices at all ports individually.

Adhesive Rubber Feet

For the desktop operation, you may stick the four round rubber feet

(supplied with the unit) to the bottom of the NewStar Switch. NOTE:

Give the rubber feet a firm press to the enclosure when applying them.

Do not use the rubber feet for rack mount operation.

Console Connection

Before installation, make sure all devices and computers to be

connected to the KVM switch have been turned off.

Plug a monitor to the Console's VGA port; connect a PS/2 mouse and

a keyboard to the port marked with a mouse and a CONSOLE

keyboard as shown in Figure 2.

Figure 2: Console Connection

Computers Connection

Use a HDB15 male-to-female cable to connect from a computer's

VGA output to VGA port of PC side, as shown in Figure 3, Figure 4,

and Figure 5.

For USB computer: Use a USB A-B cable to connect from one of

the PC ports to the USB port on the corresponding computer (A

connector, flat connector), as shown in Figure 3.

Product specificaties

Merk:	Newstar
Categorie:	Overige computer accessoire
Model:	NS-431H
Kleur van het product:	Zwart
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	2048 x 1536 Pixels
Aantal poorten:	4
Aansluiting toetsenbord:	USB, PS/2
Aansluiting muis:	USB, PS/2
Aantal computers:	4