Newstar FPMA-D100 Handleiding

Newstar Wandbeugel FPMA-D100

Lees hieronder de 📖 handleiding in het Nederlandse voor Newstar FPMA-D100 (6 pagina's) in de categorie Wandbeugel. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Before starting Assembly

Please spend a short time reading this

manual then follow the simple step by step

guide to assembly. Some panels are viewed

differently from the exploded drawing below,

this is for extra clarity.

Do not discard any of the packaging until you

have checked all the parts and the pack of

fittings. If you are missing any of the parts,

contact store where you purchased.

Tools Check-List

Allen Key

Caution:

Qty

Code

Fitting Check-List

Code

Parts Check-List

Description

Component

Bolt

Screw

Base Cover

Clamp Pad

Qty

Arm

Clamp

Connector Plate

Rubber Cap

Cable Cover

01 1

1pair

03 01

06-L

06-R

Regular cleaning with a clean dry cloth is usually sufficient, but for stubborn

marks, wipe over gently with a clean damp cloth. Never use strong detergents or

abrasive cleaners as these may damage the surface finish of your furniture. There

are many small components used in the construction of this unit. These loose

items should be kept away from young children while assembling your unit.

LCD Monitor Arm

NewStar user's Manual

LCD Monitor Arm FPMA-D100

www.NewStar.nl

Phone: + 31 (0) 23 547 88 88

Clamping system is well assembled in standard packing.

However, user could disassemble this unit and re-assemble for

thicker desk fitting by adjusting cranking bar & clamp position.

At least two screws should be used for clamping system.

Remove pad cover and adhere to bottom of larger L bracket.

Suggested thickness of desk is 15mm-100mm, over 30mm is

Check your LCD panel first to find which VESA

standard interface it supports before

assembling.

75 mm x 75 mm VESA standard interface

100 mm x 100 mm VESA standard interface

Secure the arm to the

Secure 100 x 100 mm plate 04 to the arm with

screws 08,then secure the arm to the rear of the

rear of the LCD panel with

screws 08

The loading weight of universal joint is initially

fixed below 6 kgs. Consult the store where you

purchased about adjusting weight over 6 kgs.

Press two sides of 06-L lightly and remove 06-R ,

06-L outwards. Let the cables run through the

bottom of the arm and then press cable cover 03

to the arm to fix cables steady. Assemble 06-L

and 06-R back to arm after finish cable

managing.

Remove the rubber cap 05, use the Allen key provided to

adjust the weight capacity from 3 to 8 kgs. The weight is

originally set up at 3 kgs.

Be sure to adjust the weight in a vertical position as illustrated.

Twist the Allen key in a clockwise direction for less weight;

counterclockwise direction, more weight. Make sure of the

LCD panel weight prior to adjusting the weight according to the

instruction.

Panel weight Counterclockwise direction

4 kgs 4 turns

5-6 kgs 5-7 turns

7-8 kgs 8-10 turns

ADJUSTMENT:

09 x4

08 x8

06-R

06-L

max

min

Assembly Guide

Product specificaties

Merk:	Newstar
Categorie:	Wandbeugel
Model:	FPMA-D100
Kleur van het product:	Grijs
Hoogte:	450 mm
Breedte verpakking:	330 mm
Diepte verpakking:	370 mm
Hoogte verpakking:	170 mm
In hoogte verstelbaar:	Ja
Montagewijze:	Bureau
Land van herkomst:	Taiwan
Maximale gewichtscapaciteit:	10 kg
Netto gewicht kartonnen doos:	11810 g
Draaihoek:	270 °
Montage:	Klem
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Aantal displays ondersteund:	1
(Buitenste) hoofdverpakking hoogte:	170 mm
(Buitenste) hoofdverpakking breedte:	660 mm
(Buitenste) hoofdverpakking brutogewicht:	12620 g
(Buitenste) hoofdverpakking lengte:	370 mm
Hoeveelheid per (buitenste) hoofdverpakking:	2 stuk(s)
Bereik kantelhoek:	0 - 180 °
Maximale schermgrootte:	30 "
Code geharmoniseerd systeem (HS):	85299097
Producten per pallet (EU):	44 stuk(s)
Minimale schermgrootte:	10 "
Afstand tot de muur (min):	150 mm
Afstand tot de muur (max.):	480 mm
Hoogte verstelbaarheidsbereik:	0 - 450 mm
Type hoogteverstelling:	Gastrekveer