Netgear Powerline HD Plus Ethernet Adapter HDX111 Handleiding
Netgear
Powerline adapter
Powerline HD Plus Ethernet Adapter HDX111
Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear Powerline HD Plus Ethernet Adapter HDX111 (38 pagina's) in de categorie Powerline adapter. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/38
202-10302-02
March 2008
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
HDX111 Powerline HD
Plus Ethernet Adapter
User Manual
ii
v1.1, March 2008
Technical Support
See the support information card that shipped with your product. By registering your product at http://
www.netgear.com/register
, we can provide you with faster expert technical support and timely notices of product
and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: support@netgear.com
website: http://www.netgear.com
Trademarks
© 2008 NETGEAR, Inc. NETGEAR and the NETGEAR logo are registered trademarks, and RangeMax and Smart
Wizard are trademarks of NETGEAR. Inc. in the United States and/or other countries. Microsoft, Windows, and
Windows NT are registered trademarks and Windows Vista is
a trademark of Microsoft Co
rporation. Other brand and
product names are registered trademarks or trademarks of their respective holders. Information is subject to change
without notice. All rights reserved.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice. NETGEAR does not assume any liability that
may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Safety Instructions
Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential
damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following
precautions.
• Observe and follow service markings.
- Do not service any product except as explained in your system documentation.
- Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to
electrical shock. Only a trained service technician should service components inside these compartments.
• If any of the following conditions occur, unplug the product from the electrical outlet and replace the part or contact
your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat
sources. Also, do no
t block cooling vents.
• Do not spill food or liquids on your system components, and never operate the product in a wet environment. If the
system gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.
• Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by shorting out
interior components.
v1.1, March 2008
iii
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• Operate the product only from the type of external power source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your service provider or local power company.
• To help avoid damaging your system, be sure that the voltage selection switch (if provided) on the power supply is
set to match the power available at your location:
- 115 volts (V), 60 hertz (Hz) in most of North and South America and some Far Eastern countries such as South
Korea and Taiwan
- 100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in western Japan
- 230 V, 50 Hz in most of Europe, the Middle East, and the Far East
• Also, be sure that attached devices are electrically rated to operate with the power available in your location.
• Use only approved power cables. If you have not been provided with a power cable for your system or for any AC
powered option intended for your system, purchase a power cable that is approved for use in your country. The
power cable must be rated for the product and for the voltage and current marked on the product’s electrical ratings
label. The voltage and current rating of the cable should be greater than the ratings marked on the product.
• To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical
outlets.
• The peripheral power cables are equipped with three-prong plugs to help ensure proper grounding. Do not use
adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a three-wire cable
with properly grounded plugs.
• Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into
the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or
power strip.
• To help protect your system from sudden, transient increases and decreases in electrical power, use a surge
suppressor, line conditioner, or uninterruptible power supply (UPS).
• Position system cables a bles so that they cannot be stnd power cables carefully; route ca epped on or tripped over. Be
sure that nothing rests on any cables.
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications.
• Always follow your local and national wiring rules.
• Move products with care; ensure that all casters and stabilizers are firmly connected to the system. Avoid sudden
stops and uneven surfaces.
Regulatory Notices
FCC Statement
The HDX111 has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Product specificaties
| Merk: | Netgear |
| Categorie: | Powerline adapter |
| Model: | Powerline HD Plus Ethernet Adapter HDX111 |
Heb je hulp nodig?
Als je hulp nodig hebt met Netgear Powerline HD Plus Ethernet Adapter HDX111 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Powerline adapter Netgear
20 Juni 2023
12 Juni 2023
17 Mei 2023
15 Mei 2023
14 Mei 2023
11 Mei 2023
8 Mei 2023
8 Mei 2023
8 Mei 2023
8 Mei 2023
Handleiding Powerline adapter
- Powerline adapter Asus
- Powerline adapter Medion
- Powerline adapter Allnet
- Powerline adapter AVM
- Powerline adapter D-Link
- Powerline adapter DeLock
- Powerline adapter Devolo
- Powerline adapter Edimax
- Powerline adapter Eminent
- Powerline adapter Hama
- Powerline adapter Hirschmann
- Powerline adapter ICIDU
- Powerline adapter Konig
- Powerline adapter LevelOne
- Powerline adapter Maginon
- Powerline adapter Manhattan
- Powerline adapter Mikrotik
- Powerline adapter Nedis
- Powerline adapter Renkforce
- Powerline adapter Silvercrest
- Powerline adapter Sitecom
- Powerline adapter Strong
- Powerline adapter Tiptel
- Powerline adapter TP Link
- Powerline adapter Trendnet
- Powerline adapter Western Digital
- Powerline adapter ZyXEL
- Powerline adapter Hamlet
- Powerline adapter NPG
- Powerline adapter Cisco
- Powerline adapter Comtrend
- Powerline adapter Planet
- Powerline adapter I-Tec
- Powerline adapter NetComm
- Powerline adapter Totolink
- Powerline adapter Mercusys
- Powerline adapter StarTech.com
- Powerline adapter Eero
- Powerline adapter Sabrent
- Powerline adapter Readynet
- Powerline adapter TELE System
- Powerline adapter GBS Elettronica
Nieuwste handleidingen voor Powerline adapter
14 November 2024
14 November 2024
14 November 2024
2 Oktober 2024
19 September 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024