Nec PlasmaSync 50XM3 Handleiding

Nec Monitor PlasmaSync 50XM3

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec PlasmaSync 50XM3 (62 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/62
NEC plasma display
External Control Manual
(for PX- -42XM2/PX 50XM3/PX-61XM2)
2
Application
These specifications are applicable to NEC plasma monitors and
communications control from external equipment.
"Please also support the command of VP series and refer to the manual of the
conventional model about specification."
Connections
Connections should be made as described below.
1) Connector on the plasma monitor side: EXTERNAL CONTROL connector.
Type of connector: D- -Sub 9 pin male
No.
Pin Name
1 No Connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
plasma monitor
External equipment
e.g., Personal computer
3
2) Connector on the external equipment side: Serial port (RS-232C) connector.
See the specifications of the equipment that is to be connected for the type of
connector and the pin assignment.
3) Wiring
Use a crossed (reverse) cable.
Wire the cable so that each pair of data lines cross between the two devices.
These data line pairs are RXD (Receive data) and TXD (Transmit data), DTR
(DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS
(Clear to send).
Communication Parameters
(1) Communication system Asynchronous
(2) Interface RS-232C
(3) Baud rate 9600 bps
(4) Data length 8 bits
(5) Parity Odd
(6) Stop bit 1 bit
(7) Communication code Hex


Product specificaties

Merk: Nec
Categorie: Monitor
Model: PlasmaSync 50XM3

Heb je hulp nodig?

Als je hulp nodig hebt met Nec PlasmaSync 50XM3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Nec

Handleiding Monitor

Nieuwste handleidingen voor Monitor