Nec PlasmaSync 42VP4 Handleiding

Nec Monitor PlasmaSync 42VP4

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec PlasmaSync 42VP4 (60 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/60
NEC plasma display
NEC plasma display
NEC plasma display
NEC plasma display NEC plasma display
External Control Manual
External Control Manual
External Control Manual
External Control ManualExternal Control Manual
(for PX-50XM3/PX-42XM2/PX-42VP4)
Application
Application
Application
Application Application
These specifications are applicable to NEC plasma monitors and
communications control from external equipment.
"Please also support the command of VP series and refer to the manual of the
conventional model about specification."
Connections
Connections
Connections
Connections Connections
Connections should be made as described below.
External equipment
e.
g
.
,
Personal com
p
ute
r
plasma monitor
1) Connector on the plasma monitor side: EXTERNAL CONTROL connector.
T
T
T
TType of connector: D-Sub 9-pin male
ype of connector: D-Sub 9-pin male
ype of connector: D-Sub 9-pin male
ype of connector: D-Sub 9-pin maleype of connector: D-Sub 9-pin male
No. Pin Name
1 No Connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
2
2) Connector on the external equipment side: Serial port (RS-232C) connector.
See the specifications of the equipment that is to be connected for the type of
connector and the pin assignment.
3) Wiring
Use a crossed (reverse) cable.
Use a crossed (reverse) cable.
Use a crossed (reverse) cable.
Use a crossed (reverse) cable.Use a crossed (reverse) cable.
Wire the cable so that each pair of data lines cross between the two devices.
These data line pairs are RXD (Receive data) and TXD (Transmit data), DTR
(DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS
(Clear to send).
Communication Parameters
Communication Parameters
Communication Parameters
Communication ParametersCommunication Parameters
(1) Communication system Asynchronous
(2) Interface RS-232C
(3) Baud rate 9600 bps
(4) Data length 8 bits
(5) Parity Odd
(6) Stop bit 1 bit
(7) Communication code Hex
3


Product specificaties

Merk: Nec
Categorie: Monitor
Model: PlasmaSync 42VP4

Heb je hulp nodig?

Als je hulp nodig hebt met Nec PlasmaSync 42VP4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Nec

Handleiding Monitor

Nieuwste handleidingen voor Monitor

Dell

Dell S2725HS Handleiding

3 December 2024
Dell

Dell S2725H Handleiding

3 December 2024
Dell

Dell S2721DS Handleiding

3 December 2024
Dell

Dell S2721HGFA Handleiding

3 December 2024
Dell

Dell E170S Handleiding

3 December 2024
Dell

Dell P190s Handleiding

3 December 2024
Dell

Dell ST2320L Handleiding

3 December 2024
Dell

Dell C2423H Handleiding

3 December 2024
Dell

Dell S2722DZ Handleiding

3 December 2024