Nec NC1700L Handleiding

Nec Beamer NC1700L

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec NC1700L (85 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 103 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/85
Users Manual
DLP Cinema® Projector
NC1700L
Chiller Unit
NP-17CU01
DLP Cinema® Projector
Model No.
NP-NC1700L
2
Important Information
Precautions: Please read this manual carefully before
using your NC1700L and keep the manual handy for future
reference.
The NC1700L (projector unit) is called the “projector”, the
NP-17CU01 (chiller unit) is called the “chiller unit”, and the
NP-90MS02 (integrated media server) is called the “media
block” or “IMB” in this manual.
DLP, DLP Cinema and their respective logos are trade-
marks or registered trademarks of Texas Instruments.
Microsoft, Windows and Internet Explorer are either reg-
istered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Java is a registered trademark of Oracle and/or its
affiliates.
Other product names and manufacturer names described
in this manual are the registered trademarks or trade-
marks of their respective companies.
The display screens and illustrations shown in this man-
ual may differ slightly from the actual ones.
GPL/LGPL Software Licenses
The product includes software licensed under GNU
General Public License (GPL), GNU Lesser General
Public License (LGPL), and others.
For more information on each software, see “readme.pdf”
inside the “about GPL&LGPL folder on the supplied
CD-ROM.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT OPEN COVER. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact
with any part inside of this unit.
This symbol alerts the user that important lit-
erature concerning the operation and mainte-
nance of this unit has been included. Therefore,
it should be read carefully in order to avoid any
problems.
Laser Safety Caution
This product is classied as Class 1 of IEC60825-1 Third
edition 2014. This product is classied as RG3 of IEC62471-5
First edition 2015. Obey the laws and regulations of your
country in relation to the installation and management of
the device.
CAUTION
Use of controls or adjustments of procedures other than
those specied herein may lead to hazardous laser radi-
ation exposure.
This products is classied as Class 4 of IEC60825-1:2007.
Obey the laws and regulations of your country in relation to
the installation and management of the device.
CAUTION – CLASS 4 LASER PRODUCT
LASER LIGHT – AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
3
Important Information
Do not look into the lens while the projector is on. Serious
damage to your eyes could result.
Keep any items such as magnifying glass out of the light
path of the projector. The light being projected from the
lens is extensive, therefore any kind of abnormal objects
that can redirect light coming out of the lens, can cause
unpredictable outcome such as re or injury to the eyes.
When turning on the projector, ensure that nobody is fac-
ing towards the lens in the path of the light emitted from
the laser.
This product can only be operated in theaters by speci-
ed personnel. Customers should not operate this
product.
DOC Compliance Notice (for Canada only)
This Class A digital apparatus meets all requirements of the
Canadian ICES-003 Standards.
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
CAUTION
In order to reduce any interference with radio and tele-
vision reception use a signal cable with ferrite core
attached. Use of signal cables without a ferrite core
attached may cause interference with radio and televi-
sion reception.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the installa-
tion manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
WARNING
THE END USER IS NOT ALLOWED TO OPEN OR
MODIFY THE PRODUCT.
NO USER SERVICEABLE PARTS.
MAINTAIN AND SERVICE OF THE PRODUCT IS ONLY
TO BE HANDLED BY NEC AUTHORIZED TECHNICIANS.
Important Safeguards
These safety instructions are to ensure the long life of your
projector and to prevent re and shock. Please read them
carefully and heed all warnings.
Installation
1. Do not point the projection beam toward other people or
reective objects.
2. Consult your dealer for information about transporting
and installing the projector. Do not attempt to transport
and install the projector yourself.
The projector must be installed by qualied technicians
in order to ensure proper operation and reduce the risk
of bodily injury.
3. Place the projector on a at, level surface in a dry area
away from dust and moisture. Tilting the front of the pro-
jector up or down from level could reduce laser life.
Do not put the projector on its side when the laser is on.
Doing so may cause damage to the projector.
4. Do not place the projector in direct sunlight, near heaters
or heat radiating appliances.
5. Exposure to direct sunlight, smoke or steam could harm
internal components.
6. Handle your projector carefully. Dropping or jarring your
projector could damage internal components.
7. When moving the projector, be sure to remove the lens
and chiller unit from the projector before moving it.
8. To carry the projector, a minimum of four persons are
required.
9. Do not hold the lens part with your hand. Otherwise the
projector may tumble or drop, causing personal injury.
10. Do not place heavy objects on top of the projector.
11. Turn off the projector, and disconnect the power cable
before moving the projector.
12. The cooling fan settings need to be congured when
using the projector in a location at an altitude of approxi-
mately 5500 feet/1600 meters or higher. Consult your
dealer in advance.
13. Turn off the projector when removing and installing
lenses. Failure to do so can cause loss of vision.
14. Do not install and store the projector in the below
circumstances.
Failure to do so may cause of malfunction.
In powerful magnetic elds
In corrosive gas environment
Outdoors
15. When moving the projector, check the following:
That the projector and chiller unit are turned off, the
power plug is disconnected from the outlet
That the connector cable and hose that connects the
device to the projector is unplugged


Product specificaties

Merk: Nec
Categorie: Beamer
Model: NC1700L

Heb je hulp nodig?

Als je hulp nodig hebt met Nec NC1700L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer Nec

Handleiding Beamer

Nieuwste handleidingen voor Beamer