Nec MDG3-BNDL1 Handleiding

Nec Monitor MDG3-BNDL1

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec MDG3-BNDL1 (18 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

MD211G3

MD211G3 paper manual.indb 1

MD211G3 paper manual.indb 1MD211G3 paper manual.indb 1 3/27/12 11:18:27 AM

3/27/12 11:18:27 AM

3/27/12 11:18:27 AM3/27/12 11:18:27 AM

Registration Information

Declaration

Declaration of the Man

Declaration of the Manufacturer

ufacturer

Declaration of the Manufacturer

Means of Conformity

Device Classiﬁ cation: Class I, non-measuring function

Applicable Rules: Annex IX, Rules 1.4 (Section 1)

and 1.1 (Section 3)

Product Name: MD211G3

21.3” Diagnostic Imaging

Grayscale LCD Monitor

Model Number: MD211G3

UMDNS Code: 16-603

NEC Display Solutions Europe GmbH declares that the product

listed is in conformity with the essential requirements and

provisions of the Council Directive 93/42/EEC, including the

amendments of the Council Directive 2007/47/EC, and conforms

to the applicable clauses of the following standards:

– EN 60601-1

– EN 60601-1-2

– EN 61000-3-2

– EN 61000-3-3

NEC Display Solutions Europe GmbH

Landshuter Allee 12-14. 80637 Muenchen, Germany

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 601-1:08.

FCC Information

1. Use the attached speciﬁ ed cables with the MD211G3 grayscale monitor so as not to interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to ensure FCC compliance.

(2) Please use the supplied shielded video signal cable or DVI-D to DVI-D cable.

Use of other cables and adapters may cause interference with radio and television reception.

2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.

The user may ﬁ nd the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve

Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Ofﬁ ce, Washington, D.C., 20402,

Stock No. 004-000-00345-4.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.

Address: 500 Park Boulevard, Suite 1100

Itasca, Illinois 60143

Tel. No.: (630) 467-3000

Type of Product: Display Monitor

Equipment Classiﬁ cation: Class B Peripheral

Model: MD211G3

We hereby declare that the equipment speciﬁ ed above conforms

to the technical standards as speciﬁ ed in the FCC Rules.

Classiﬁ cation

According to the type of protection against electric shock: CLASS I

According to the degree of protection against electric shock: No applied part

According to the degree of protection against ingress of water as detailed in the current edition of IEC529: IPX0

According to the method of sterilization or disinfection recommended by the manufacturer: Not Speciﬁ ed

According to the degree of safety of application in the presence of a FLAMMABLE AN AESTHETIC MIXTURE WITH AIR or a WITH OXYGEN

OR NITROUS OXIDE: Not AP or APG category

According to the mode of operation: Continuous operation

MD211G3 paper manual.indb 2

MD211G3 paper manual.indb 2MD211G3 paper manual.indb 2 3/27/12 11:18:28 AM

3/27/12 11:18:28 AM

3/27/12 11:18:28 AM3/27/12 11:18:28 AM

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s

top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-

friendly products, and always strive to help deﬁ ne and comply with the latest independent standards from agencies such as

ISO (International Organisation for Standardization).

Disposing of your old NEC product

The aim of recycling is to gain an environmental beneﬁ t by means of re-use, upgrading, reconditioning or reclamation of

material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely

disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS oﬀers a variety of recycling procedures

and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.

All required information concerning the disposal of the product and country-speciﬁ c information on recycling facilities can be

found on our following websites:

http://www.nec-display-solutions.com/greencompany/ (in Europe),

http://www.nec-display.com (in Japan) or

http://www.necdisplay.com (in USA).

Energy Saving

This monitor features an advanced energy saving capability. When a VESA Display Power Management Signalling (DPMS)

Standard signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.

Mode Power consumption LED colour

Normal Operation Approx. 105 W Green

Energy Saving Mode Less than 2 W Amber

O Mode Less than 1 W Unlit

WEEE Mark (European Directive 2002/96/EC)

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic

products carrying the mark (left) must be disposed of separately from normal household waste. This includes

monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your

NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased

the product, or if applicable, follow any agreements made between yourself and NEC.

The mark on electrical and electronic products only applies to the current European Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority

so as to comply with the correct disposal method.

Manufacturer’s Recycling and Energy Information

MD211G3 paper manual.indb 3

MD211G3 paper manual.indb 3MD211G3 paper manual.indb 3 3/27/12 11:18:29 AM

3/27/12 11:18:29 AM

3/27/12 11:18:29 AM3/27/12 11:18:29 AM

Product specificaties

Merk:	Nec
Categorie:	Monitor
Model:	MDG3-BNDL1
Kleur van het product:	Zwart
Bluetooth:	Nee
Aan/uitschakelaar:	Ja
In hoogte verstelbaar:	Ja
Beeldscherm:	LCD
Beeldschermdiagonaal:	21.3 "
Resolutie:	2048 x 1536 Pixels
Touchscreen:	Nee
Oorspronkelijke beeldverhouding:	4:3
Ondersteuning voor plaatsing:	Horizontaal/Verticaal
Ethernet LAN:	Ja
Kijkhoek, horizontaal:	176 °
Kijkhoek, verticaal:	176 °
Meegeleverde kabels:	AC,DisplayPort,DVI,USB
Typische contrastverhouding:	600:1
Snelstartgids:	Ja
Frequentiebereik horizontaal:	31.5 - 99.4 kHz
Frequentiebereik verticaal:	50 - 85 Hz
Bevestigingsmogelijkheid voor kabelslot:	Nee
Ingebouwde luidsprekers:	Nee
Stroomverbruik (in standby):	- W
Certificering:	C-UL, EN 60601-1, ISO 9241-307, ISO 13406-2, US Mercury Regulations, ECMA-370, SB50 (California), WEEE, RoHS, PC Recycle, CCC, CEL Grade AAPM-TG18, DIN V 6868-57, FDA 501(k)
HDCP:	Nee
HD type:	Niet ondersteund
Ingang stroom:	Ja
3D:	Nee
Responstijd:	13 ms
Pixel pitch:	0.21 x 0.21 mm
Ondersteunde grafische resoluties:	2048 x 1536 (QXGA)
VESA-montage:	Ja
Paneelmontage-interface:	100 x 100 mm
Picture-in-Picture:	Nee
DVI-D poorten:	1
Helderheid (typisch):	1450 cd/m²
Beeldverhouding:	4:3
Digitale horizontale frequentie:	31.5 - 126.3 kHz
Digitale verticale frequentie:	50 - 85 Hz
Geïntegreerde TV Tuner:	Nee
Diepte ( zonder voet ):	104 mm
Hoogte (zonder voet ):	361.6 mm
Breedte ( zonder voet ):	467.8 mm
Gewicht (zonder voet):	7500 g
Plug and play:	Ja
Aantal DisplayPorts:	1
Breedte apparaat (met standaard):	467.8 mm
Diepte apparaat (met standaard):	227.6 mm
Hoogte apparaat (met standaard):	377.6 mm
Gewicht (met standaard):	1700 g
On Screen Display (OSD):	Nee
Aantal USB Type-A downstream-poorten:	1
Versie USB-hub:	2.0
Stroomverbruik (PowerSave):	2 W
Thin client geïnstalleerd:	Nee
Temperatuur bij opslag:	-10 - 60 °C
Luchtvochtigheid bij opslag:	10 - 85 procent
Bedrijfstemperatuur, bereik:	41 - 140 °F
Hoogte, in bedrijf:	0 - 3000 m
Scharnier:	Ja
Compatibiliteit:	MDA-V5800
Wifi:	Nee
Stroomverbruik (typisch):	105 W
Bedrijfstemperatuur (T-T):	5 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 80 procent
Aantal producten inbegrepen:	2 stuk(s)