MXL R144 Handleiding

MXL Microfoon R144

Lees hieronder de 📖 handleiding in het Nederlandse voor MXL R144 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Ribbon Microphone

A Division of Marshall Electronics

Phone: 310-333-0606 • 800-800-6608 • Fax: 310-333-0688

www.mxlmics.com • sales@mxlmics.com

Contents

Warranty

Care

General Characteristics

Microphone Cable

Shock Mount

Power Requirements

Unpack your MXL R144 Microphone package carefully and verify that all of the following items are

included:

• MXL Ribbon Microphone

• Shock Mount

• Microﬁber Cleaning Cloth

If any of these items are missing or damaged, contact the company from which you purchased the

microphone.

MXL microphones are guaranteed against defects in materials and workmanship for one year from

the date of purchase. If you encounter any problem with this unit, promptly contact the company

from which you purchased it for assistance. The original dated sales receipt will be necessary

for any warranty claim. Do not send any unit directly to us without prior authorization from our

service department. Warranty coverage is limited to repair or replacement (at our option) of the

microphone, and does not cover incidental damages due to use of this unit, nor damage caused

by accidental misuse of this product.

The ribbon element is very fragile. Although each unit has been thoroughly checked by MXL, it is

important to check the microphone as soon as you receive it to insure that it was not damaged

in shipping. To help prevent transducer failure, avoid large vibrations and severe shock such

as dropping the microphone. Never expose the microphone to large bursts of air as it can

stretch or tear the ribbon element. It is highly recommended to use a pop-ﬁlter when using this

microphone. Dust and foreign material (especially metal shavings) can degrade the performance

of a microphone so always store the unit in its case. Never intentionally or accidentally apply

power to the microphone as it can permanently damage the ribbon element. Please note: Damage

to the ribbon is not covered by the warranty, and there will be a charge for a replacement.

The MXL R144 Ribbon microphone uses an aluminum ribbon transducer which by nature is a

bidirectional (ﬁgure-8) pickup pattern. A ﬁgure-8 pattern will pick up sounds from the front and

back sides of the microphone with equal sensitivity while maintaining a large amount of rejection

90° off access. The front of the microphone is indicated by the MXL logo where the audio signal

is “in-phase” while the back side has an inverted phase. Ribbon mics typically have a lower

output than condenser microphones and may require a preampliﬁer with a lot of gain. It is highly

recommended to use a preamp with low noise, high gain, and an input impedance of 1500 ohms

or greater. We strongly advise experimentation with placement and isolation requirements with the

gain initially set low to avoid possible equipment (and hearing) damage.

The microphone cable can have a profound effect on the sound of any microphone. Even the ﬁnest

microphone will sound poor if the interconnect cable allows noise to enter or causes distortion and

loss of information. We recommend that you use the best microphone cable that your budget

will allow.

The MXL shock mount can shift in shipment. Simply shift the nylon bands to center the microphone

in the assembly. Be sure that the wire clamp does not rest on the chassis of the mount, as this

impairs mechanical isolation. Slide the mount all the way to the rim of the microphone for the most

secure hold.

IMPORTANT! This microphone does NOT require a power supply. Use of phantom power with

this microphone is NOT recommended as it can severely damage the ribbon element and cause

the microphone to be unusable.

Speciﬁcations

Polar PatternFrequency Chart

Thank you for choosing the MXL R144 Ribbon Microphone. For best results, please take a few

moments to read this manual and familiarize yourself with proper operation and care of this

microphone.

AD071817a

Ribbon Microphone

Type Ribbon Velocity Microphone

Ribbon Element 1.8-micron aluminum ribbon

Ribbon Length 47 mm

Frequency Response 20Hz -17kHz

Polar Pattern Figure 8

Impedance 250 ohms

Sensitivity -56 dB (0 dB=1V/Pa)

Rated Load Impedance >1500 Ohms

Max SPL for 0.5% THD >130 dB @1 kHz

Size 47mm x 171mm/1.85 in. x 6.75 in.

Weight 400g/0.85 lbs

Metal Finish Purple and chrome

90270

180

Product specificaties

Merk:	MXL
Categorie:	Microfoon
Model:	R144

Heb je hulp nodig?

Als je hulp nodig hebt met MXL R144 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Microfoon MXL

MXL CR89 Handleiding

29 Augustus 2024

MXL AC-360-Z V2 Handleiding

29 Augustus 2024

MXL AC-44 Handleiding

29 Augustus 2024

MXL CR21 Handleiding

29 Augustus 2024

MXL Genesis HE Handleiding

29 Augustus 2024

29 Augustus 2024

26 Augustus 2024

26 Augustus 2024

26 Augustus 2024

26 Augustus 2024

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Vonyx CM300W Handleiding

4 December 2024

Sennheiser XSW-D Mobile Cable Handleiding

4 December 2024

Sennheiser MMD 935 Handleiding

4 December 2024

Sennheiser MMD 945 Handleiding

4 December 2024

Sennheiser EZL 2020-20L Handleiding

4 December 2024

Sennheiser SL Tablestand 133-S DW Handleiding

4 December 2024

Sennheiser ME 9005 Handleiding

4 December 2024

Sennheiser MME 865 Handleiding

4 December 2024

Sennheiser MMK 965 Handleiding

4 December 2024

Sennheiser MMD 845 Handleiding

4 December 2024