Motu M64 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Motu M64 (108 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/108
ā„¢
M64
User Guide
1280 Massachusetts Avenue
Cambridge, MA 02138
Business voice: (617) 576-2760
Business fax: (617) 576-3609
Web site: www.motu.com
Tech support: www.motu.com/support
SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS FOR THE M64 (ā€œPRODUCTā€)
CAUTION! READ THIS SAFETY GUIDE BEFORE YOU BEGIN INSTALLATION OR OPERATION. FAILURE TO COMPLY WITH SAFETY
INSTRUCTIONS COULD RESULT IN BODILY INJURY OR EQUIPMENT DAMAGE.
HAZARDOUS VOLAGES: CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN. TURN OFF UNIT BEFORE SERVICING.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS
1. Read these instructions. All the safety and operating instructions should be read before operating the product.
2. Keep these instructions. These safety instructions and the product ownerā€™s manual should be retained for future reference.
3. Heed all warnings. All warnings on the product and in the ownerā€™s manual should be adhered to.
4. Follow all Instructions. All operating and use instructions should be followed.
5. Do not use the product near water.
6. Cleaning - Unplug the product from the computer and clean only with a dry cloth. Do not use liquid or aerosol cleaners.
7. Ventilation - Do not block any ventilation openings. Install in accordance with the manufacturerā€™s instructions.
8. Heat - Do not install the product near any heat sources such as radiators, heat registers, stoves, or another apparatus (including an ampliļ¬er)
that produces heat.
9. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of ļ¬re or electrical shock.
10.Power supply cord - Protect the product power supply cord from being walked on or pinched by items placed upon or against them.
11.Power switch - Install the product so that the power switch can be accessed and operated at all times.
12.Disconnect - The main power supply plug is considered to be the disconnect device for the product and shall remain readily operable.
13.Accessories - Only use attachments/accessories speciļ¬ed by the manufacturer.
14.Surge protection - Unplug the product during lightning storms or when unused for long periods of time.
15.Servicing - Refer all servicing to qualiļ¬ed service personnel. Servicing is required when the product has been damaged in any way, such as
when a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed
to rain or moisture, does not operate normally, or has been dropped.
16.Power Sources - Refer to the manufacturerā€™s operating instructions for power requirements.
17.Installation - Do not install the product in an unventilated rack, or directly above heat-producing equipment such as power ampliļ¬ers. Observe
the maximum ambient operating temperature listed below.
18.Power ampliļ¬ers- Never attach audio power ampliļ¬er outputs directly to any of the unitā€™s connectors.
19.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts speciļ¬ed by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ļ¬re, electric shock or other
hazards.
20.Safety Check - Upon completion of any service or repairs to this MOTU product, ask the service technician to perform safety checks to
determine that the product is in safe operating conditions.
ENVIRONMENT, HEAT AND VENTILATION
Operating Temperature: 10Ā°C to 40Ā°C (50Ā°F to 104Ā°). The product should be situated away from heat sources or other equipment that produces
heat. When installing the product in a rack or any other location, be sure there is adequate space around the product to ensure proper ventilation.
Improper ventilation will cause overheating and can damage the unit.
TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE
Do not handle the power supply with wet hands. Do not pull on the power supply cord when disconnecting it from an AC wall outlet. Grasp it by
the plug. Do not expose this apparatus to rain or moisture. Do not place objects containing liquids on it.
DC INPUT
10 - 24V DC ā€¢ 1.0A max
III
Contents
Part 1: Getting Started
7Quick Start Guide
9M64 Front Panel
10 M64 Rear Panel
11 MOTU Pro Audio Control Web App
23 About the M64
27 Packing List and System Requirements
29 Software Installation
33 Hardware Installation
Part 2: Using the M64
49 Presets
53 The Front Panel LCD
55 Working with Host Audio Software
63 Mixer Effects
71 MOTU Audio Tools
87 Networking
Part 3: Appendices
95 Troubleshooting
97 Audio Specifications
99 Mixer Schematics
103 Updating Firmware
105 OSC Support
107 Index


Product specificaties

Merk: Motu
Categorie: DJ Gear
Model: M64

Heb je hulp nodig?

Als je hulp nodig hebt met Motu M64 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DJ Gear Motu

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear