Motu 24I Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Motu 24I (70 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/70
Mark of the Unicorn, Inc.
1280 Massachusetts Avenue
Cambridge, MA 02138
Business voice: (617) 576-2760
Business fax: (617) 576-3609
Tech support fax: (617) 354-3068
Tech support email: techsupport@motu.com
Web site: http://www.motu.com
MOTU 24i
User’s Guide for Macintosh
SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: DO NOT PERMIT FINGERS TO TOUCH THE TERMINALS OF PLUGS WHEN INSTALLING OR REMOVING THE PLUG TO OR FROM THE OUTLET.
WARNING: IF NOT PROPERLY GROUNDED THE 24i audio interface COULD CAUSE AN ELECTRICAL SHOCK.
The 24i audio interface is equipped with a three-conductor cord and grounding type plug which has a grounding prong, approved by Underwriters' Laboratories and the Canadian Standards
Association. This plug requires a mating three-conductor grounded type outlet as shown in Figure A below.
If the outlet you are planning to use for the 24i audio interface is of the two prong type, DO NOT REMOVE OR ALTER THE GROUNDING PRONG IN ANY MANNER. Use an adapter as shown below
and always connect the grounding lug to a known ground. It is recommended that you have a qualied electrician replace the TWO prong outlet with a properly grounded THREE prong outlet. An
adapter as illustrated below in Figure B is available for connecting plugs to two-prong receptacles.
WARNING: THE GREEN GROUNDING LUG EXTENDING FROM THE ADAPTER MUST BE CONNECTED TO A PERMANENT GROUND SUCH AS TO A
PROPERLY GROUNDED OUTLET BOX. NOT ALL OUTLET BOXES ARE PROPERLY GROUNDED.
If you are not sure that your outlet box is properly grounded, have it checked by a qualied electrician. NOTE: The adapter illustrated is for use only if you already have a properly grounded two-prong
receptacle. Adapter is not allowed in Canada by the Canadian Electrical Code. Use only three wire extension cords which have three-prong grounding type plugs and three-prong receptacles which
will accept the 24i audio interface plug.
IMPORTANT SAFEGUARDS
1. Read instructions - All the safety and operating instructions should be read before operating the 24i audio interface.
2. Retain instructions - The safety instructions and owner's manual should be retained for future reference.
3. Heed Warnings - All warnings on the 24i audio interface and in the owner's manual should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug the 24i audio interface from the computer before cleaning and use a damp cloth. Do not use liquid or aerosol cleaners.
6. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of re or electrical shock.
7. Power Sources - This 24i audio interface should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your local power company.
8. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords and plugs, convenience receptacles, and
the point where they exit from the 24i audio interface.
9. Lightning - For added protection for the 24i audio interface during a lightning storm, unplug it from the wall outlet. This will prevent damage to the 24i audio interface due to lightning and power line surges.
10. Servicing - Do not attempt to service this 24i audio interface yourself as opening or removing covers will expose you to dangerous voltage and other hazards. Refer all servicing to qualied service personnel.
11. Damage Requiring Service - Unplug the 24i audio interface from the computer and refer servicing to qualied service personnel under the following conditions.
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the 24i audio interface.
c. If the 24i audio interface has been exposed to rain or water.
d. If the 24i audio interface does not operate normally by following the operating instructions in the owner's manual.
e. If the 24i audio interface has been dropped or the cabinet has been damaged.
f. When the 24i audio interface exhibits a distinct change in performance, this indicates a need for service.
12. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specied by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in re, electric shock or other hazards.
13. Safety Check - Upon completion of any service or repairs to this 24i audio interface, ask the service technician to perform safety checks to determine that the product is in safe operating conditions.
ENVIRONMENT
Operating Temperature: 10°C to 40°C (50°F to 104°)
AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
Do not handle the power cord with wet hands. Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
INPUT
Line Voltage: 100 - 120 volts AC, RMS (US and Japan) or 220 - 250 volts AC, RMS (Europe). Frequency: 47 - 63 Hz single phase. Power: 7 watts maximum.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BYMANUFAC-
TURER. DISPOSE OF USED BATTERY ACCORDING TO MANUFACTURERS INSTRUCTIONS.
3-prong plug
Grounding prong
Properly grounded 3-prong outlet
Grounding lug
Screw
3-prong plug
Adapter
Make sure this is connected
to a known ground.
Two-prong receptacle
Figure A Figure B
III
Contents
5Quick Reference: 24i I/O Front Panel
6Quick Reference: 24i I/O Rear Panel
7Quick Reference: PCI-324 Audio Card
9Quick Reference: 24i Expansion I/O
11 Quick Reference: MOTU 324 Console Window
13 About the 24i
17 Core System Packing List and
Macintosh System Requirements
19 Installing the 24i Hardware
27 Installing the 24i Macintosh Software
31 MOTU 324 Console Window
39 Using the 24i with Digital Performer
43 Using the 24i with AudioDesk
47 Using the 24i with Cubase VST
51 Sound Manager
57 Expanding Your 24i System
61 Reducing Latency
67 Troubleshooting


Product specificaties

Merk: Motu
Categorie: DJ Gear
Model: 24I

Heb je hulp nodig?

Als je hulp nodig hebt met Motu 24I stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DJ Gear Motu

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear

BeamZ

BeamZ Fingers 7 Handleiding

21 November 2024
BeamZ

BeamZ StrobeMoon Handleiding

21 November 2024
Denon DJ

Denon DJ MCX8000 Handleiding

17 November 2024
Saramonic

Saramonic SR-EA5 Handleiding

15 November 2024
Yamaha

Yamaha MW12C Handleiding

14 November 2024
Yamaha

Yamaha MW12 Handleiding

14 November 2024
Yamaha

Yamaha MW8CX Handleiding

14 November 2024
Yamaha

Yamaha MW10C Handleiding

14 November 2024