Motorola i776 Handleiding

Motorola Mobiele telefoon i776

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola i776 (228 pagina's) in de categorie Mobiele telefoon. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/228

User Guide

i776 by Motorola®

www.nextel.com

of Sprint. Other marks are the property of their respective owners.

8/6/08

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196

www.hellomoto.com

Note: Do not ship your phone to the above address. If you

need to return your phone for repairs, replacement or warranty

service, please contact the Motorola Customer Support Center

at:

1-800-453-0920 (United States)

1-877-483-2840 (TTY/TDD United States for hearing impaired)

Product Support:

www.motorola.com/support

Certain mobile phone features are dependent on the

capabilities and settings of your service provider’s network.

Additionally, certain features may not be activated by your

service provider, and/or the provider's network settings may

limit the feature’s functionality. Always contact your service

provider about feature availability and functionality. All features,

functionality, and other product specifications, as well as the

information contained in this user's guide are based upon the

latest available information and are believed to be accurate at

the time of printing. Motorola reserves the right to change or

modify any information or specifications without notice or

obligation.

Manual number: NNTN7499A

FCC Notice to Users

The following statement applies to all products that have

received FCC approval. Applicable products bear the FCC

logo, and/or an FCC ID in the format FCC-ID: IHDP56HS1

on the product label.

Motorola has not approved any changes or modifications to

this device by the user. Any changes or modifications could

void the user’s authority to operate the equipment. See 47 CFR

Sec. 15.21.

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation. See 47 CFR Sec. 15.19(3).

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

䢇Reorient or relocate the receiving antenna.

䢇Increase the separation between the equipment and the

receiver.

䢇Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

䢇Consult the dealer or an experienced radio/TV technician for

help.

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Your Phone’s Menu. . . . . . . . . . . . . . . . . . . . . . . . ii

Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Section 1: Getting Started . . . . . . . . . . . . . . . . . . 1

1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . 2

Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . 2

Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . 3

Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . 3

Enabling Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Account Passwords . . . . . . . . . . . . . . . . . . . . . . . . . 4

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1B. Phone Basics . . . . . . . . . . . . . . . . . . . . . . . . 6

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting Started With Your Phone . . . . . . . . . . . . . . 8

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . 15

Navigating Through Phone Menus

and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Displaying Your Phone Number and

Direct Connect Number . . . . . . . . . . . . . . . . . . . . 19

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Section 2: Using Your Phone. . . . . . . . . . . . . . . 27

2A. Making and Answering Calls . . . . . . . . . . 28

Types of Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Making and Answering Phone Calls . . . . . . . . . 29

Making and Answering Direct Connect Calls . 36

Making and Answering Group Connect Calls . 39

Nextel Direct Send . . . . . . . . . . . . . . . . . . . . . . . . . 44

Making and Answering Talkgroup Calls . . . . . . 51

Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Making and Answering Direct Talk Calls . . . . . . 55

2B. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Using the Settings Menu . . . . . . . . . . . . . . . . . . . 60

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . 71

Temporarily Turning Off Transmissions

(Airplane Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Setting One Touch Direct Connect . . . . . . . . . . . 74

Headset Options . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . 80

2C. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

SIM Card Security . . . . . . . . . . . . . . . . . . . . . . . . . 84

Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . 86

Your Phone’s Keypad Lock . . . . . . . . . . . . . . . . . 86

Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . 87

GPS Privacy Options . . . . . . . . . . . . . . . . . . . . . . . 88

Java Applications & GPS Security . . . . . . . . . . . 89

2D. Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . 92

About Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . 92

Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . . . 95

Recent Calls Options . . . . . . . . . . . . . . . . . . . . . . 95

Saving Items From Recent Calls . . . . . . . . . . . . . 96

Deleting Items From Recent Calls . . . . . . . . . . . 96

Prepending a Phone Number From

Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

2E. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

About Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Creating Contacts Entries . . . . . . . . . . . . . . . . . . . 99

Viewing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 102

Adding a Number or Address to an Entry . . . 103

Editing Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Deleting Entries . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Assigning Speed Dial Numbers . . . . . . . . . . . . 104

Selecting a Ringer Type for an Entry . . . . . . . . 105

Checking Capacity . . . . . . . . . . . . . . . . . . . . . . . 105

Dialing Nextel Customer Service . . . . . . . . . . . 105

2F. Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Datebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Java Applications . . . . . . . . . . . . . . . . . . . . . . . . 113

Digital Rights Management (DRM) . . . . . . . . . 117

GPS Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Memo Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Voice Records . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Media Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Call Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

2G. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . 136

2H. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Turning Bluetooth On and Off . . . . . . . . . . . . . . 138

Using the Bluetooth Menu . . . . . . . . . . . . . . . . . 139

Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . 140

Transferring Items Via Bluetooth . . . . . . . . . . . 146

Section 3: Service Features . . . . . . . . . . . . . . 149

3A. Service Features: The Basics . . . . . . . . 150

Message Center . . . . . . . . . . . . . . . . . . . . . . . . . 150

Receiving Messages . . . . . . . . . . . . . . . . . . . . . . 151

Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Multimedia Messages . . . . . . . . . . . . . . . . . . . . 154

Text Messaging (SMS) . . . . . . . . . . . . . . . . . . . . . 173

Caller ID Blocking . . . . . . . . . . . . . . . . . . . . . . . . 174

Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

Putting a Call on Hold and Making a

Second Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Making a Three-Way Call . . . . . . . . . . . . . . . . . . 176

Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

Making International Calls . . . . . . . . . . . . . . . . . 179

Special Dialing Codes . . . . . . . . . . . . . . . . . . . . . 179

Nextel Phone Services . . . . . . . . . . . . . . . . . . . 180

3B. Data Services . . . . . . . . . . . . . . . . . . . . . . 182

Wireless Data Services . . . . . . . . . . . . . . . . . . . 182

Downloading Content . . . . . . . . . . . . . . . . . . . . 185

Using Your Phone as a Modem . . . . . . . . . . . 185

Section 4: Safety and Warranty

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

4A. Important Safety Information . . . . . . . . 190

General Precautions . . . . . . . . . . . . . . . . . . . . . . 190

Maintaining Safe Use of and Access to

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

Using Your Phone With a Hearing

Aid Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Caring for the Environment by Recycling . . . . 195

Caring for the Battery . . . . . . . . . . . . . . . . . . . . . 195

Export Law Assurances . . . . . . . . . . . . . . . . . . . 197

Radio Frequency (RF) Energy . . . . . . . . . . . . . . 198

Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . 200

Patent and Trademark Information . . . . . . . . . . 201

Software Copyright Notice . . . . . . . . . . . . . . . . . 201

Privacy and Data Security . . . . . . . . . . . . . . . . . 202

Smart Practices While Driving . . . . . . . . . . . . . . 202

4B. Manufacturer’s Warranty . . . . . . . . . . . . 204

Motorola Limited Warranty

for the United States and Canada . . . . . . . . . . 204

Service and Repairs . . . . . . . . . . . . . . . . . . . . . . 209

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Introduction

This User Guide introduces you to your wireless service

and all the features of your new phone. It’s divided into

four sections:

⽧Section 1: Getting Started

⽧Section 2: Using Your Phone

⽧Section 3: Service Features

⽧Section 4: Safety and Warranty Information

Throughout this guide, you’ll find tips that highlight

special shortcuts and timely reminders to help you

make the most of your new phone and service. The

Table of Contents and Index will also help you quickly

locate specific information.

You’ll get the most out of your phone if you read each

section. However, if you’d like to get right to a specific

feature, simply locate that section in the Table of

Contents and go directly to that page. Follow the

instructions in that section, and you’ll be ready to use

your phone in no time.

User

Guide

Note

Because of updates in phone software, this

printed guide may not be the most current

version for your phone. Visit www.nextel.com

and sign in to access the most recent version

of the user guide.

WARNING Please refer to the Important Safety

Information section on page 190 to learn

about information that will help you safely use

your phone. Failure to read and follow the

Important Safety Information in this phone

guide may result in serious bodily injury,

death, or property damage.

Your Phone’s Menu

The following table outlines your phone’s menu

structure. For more information about using your

phone’s menus, see “Navigating Through Phone

Menus and Options” on page 18.

Net

Java Apps

Settings

1: Display/Info

1: Wallpaper

1: Buy Wallpapers 2: Auto Cycle

3: Wallpaper

2: Text Size

1: Zoom 2: Standard

3: Compressed

3: Theme

1: Onyx 2: Blue Ice

3: Crimson

4: Home Icons

5: Backlight

6: Clock

7: Menu View

1: Icon View 2: List View

8: Large Dialing

9: Language

2: Phone Calls

1: Set Line

2: Any Key Ans

3: Auto Redial

4: Call Waiting

5: Auto Ans

6: Flip Activation

7: Minute Beep

8: Call Duration

9: TTY

10: Hearing Aid

iii

11: Notifications

12: DTMF Dialing

13: Prepend

3: DC/GC Options

1: Tkgrp Silent

2: Tkgrp Area

3: One Touch DC

4: Alert Type

5: On/Off Settings

6: Store Rcvd Info

7: PTT Backlight

4: Personalize

1: Menu Options

1: Reorder Menu 2: Add/Remove Apps

2: Up Key

3: Down Key

4: Left Key

5: Right Key

6: Center Key

7: Left Sftkey

8: Right Sftkey

9: Power Up

5: Volume

6: Security

1: Phone Lock

2: Keypad Lock

3: SIM PIN

4: GPS PIN

5: Change Passwds

7: Advanced

1: Alert Timeout

2: Headset/Spkr

3: Connectivity

4: Reset Defaults

5: Return to Home

6: Transmitters

7: Baud Rate

Ring Tones

1: Buy Ring Tones

2: Vibrate All

3: < list of ringtones >

4: Vibrate

5: Silent

Contacts

Messagesa

1: [Create Mesg]

2: Voice Mail

3: Inbox

4: Drafts

5: Sent Items

6: Net Alert

7: SMS

Call Forward

Downloads

Bluetooth

1: Hands Free

2: Link to Devices

3: Device History

4: Setup

5: Find Me

My Info

Direct Talk

1: Go To Direct Talk

2: Setup

1: Direct Launch

2: State Tone

3: Help

Direct Connect

VoiceRecord

Please keep in mind that the menu options and order

shown here may change as updates become available

and as you set your own preferences through the

Settings > Personalize > Menu Options feature.

GPS

1: Position

2: Privacy

3: Interface

Datebook

Memo

Call Timers

1: Last Call

2: Phone Reset

3: Phone Lifetime

4: DC/GC Reset

5: DC/GC Lifetime

6: Kbytes Reset

Recent Calls

Shortcuts

Profiles

1: [New Profile]

2: Standard

3: Car

4: Meeting

5: Office

6: Outdoors

7: Headset

8: PRVT Only

9: CONTCS Only

10: Surveillance

Call Alert

Camera

Media Center

a.The Messaging menus may look slightly different,

depending on the messaging setup of your phone.

Use and Care

To care for your Motorola phone, keep it away from:

liquids of any kind

Don’t expose your phone to water, rain,

extreme humidity, sweat, or other

moisture.

extreme heat or cold

Avoid temperatures below -10°C/14°F or

above 45°C/113°F.

microwaves

Don’t try to dry your phone in a

microwave oven.

dust and dirt

Don’t expose your phone to dust, dirt,

sand, food, or other inappropriate

materials.

cleaning solutions

To clean your phone, use only a dry soft

cloth. Don’t use alcohol or other

cleaning solutions.

the ground

Don’t drop your phone.

Section 1

Getting Started

2 Section 1A. Setting Up Service

Section 1A

Setting Up Service

⽧Setting Up Your Phone (page 2)

⽧Activating Your Phone (page 3)

⽧Setting Up Your Voicemail (page 3)

⽧Enabling Security (page 4)

⽧Account Passwords (page 4)

⽧Getting Help (page 5)

Setting up service on your new phone is quick and easy. This

section walks you through the necessary steps to

unlock your phone, set up your voicemail, establish

passwords, and contact Nextel for assistance with your

wireless service.

Setting Up Your Phone

1. Make Sure your SIM card is in Place.

2. Install the battery.

䡲See “Installing the Battery” on page 11.

3. Press P to turn the phone on.

䡲If your phone is activated, it will turn on, search for

service, and enter standby mode.

䡲If your phone is not yet activated, see “Activating

Your Phone” on page 3 for more information.

4. Make your first call.

䡲Use your keypad to enter a phone number.

䡲Press N.

Note You may see a prompt to update your browser

information. Press the left softkey (the top left key

below the display screen) to select Ok and complete

the task.

Setting Up Service

Section 1A. Setting Up Service 3

Activating Your Phone

䢇If you purchased your phone at a Nextel Store, it is

probably activated and ready to use.

䢇If your phone is not activated, please call Nextel

Customer Service at 1-800-639-6111 from any other

phone.

䢇When you power up your phone the first time, it

performs a series of security checks. For example, it

verifies the phone is Nextel-approved and the correct

SIM card is installed. If you don’t pass the security

checks, your phone displays messages and screen

prompts showing what to do next. If you still

encounter security messages, call Nextel Customer

Service at 1-800-639-6111 from any other phone.

Setting Up Your Voicemail

All unanswered calls to your phone are automatically

transferred to your voicemail, even if your phone is in

use or turned off. Therefore, it is recommended that you

set up your voicemail and personal greeting as soon

as your phone is activated.

1. Using your i776 phone, call your wireless phone

number.

2. Follow the system prompts to:

䡲Create your passcode.

䡲Record your name announcement.

䡲Record your greeting.

For more information about using your voicemail, see

“Voicemail” on page 153.

Note Your phone’s battery should have enough charge for

your phone to turn on and find a signal, set up your

voicemail, and make a call. You should fully charge

your battery as soon as possible. See “Charging the

Battery” on page 12 for details.

Tip You must be in an area covered by the Nextel

National Network when you first power up your

phone.

4 Section 1A. Setting Up Service

Enabling Security

You must enable security the first time you power on

your phone or within ten days of first activation of your

phone.

1. Press and hold P for two seconds to power on

your phone.

2. Press Ok (right softkey).

3. You are prompted to enable security. Press Yes

(right softkey). A series of screens followed by the

default homepage displays.

4. Press P to return to standby mode.

Account Passwords

With Nextel service, you enjoy unlimited access to your

personal account information and voicemail account.

To ensure that no one else has access to your

information, you need to create passwords to protect

your privacy.

Account Username and Password

If you are the account owner, you will create an account

username and password when you sign on to

www.nextel.com. (Click Need to register for access? to get

started.) If you are not the account owner (if someone

else receives the bill for your service), you can get a

sub-account password at www.nextel.com.

Note When you go to www.nextel.com, you will be

redirected to www.sprint.com by default. Follow the

account.

Setting Up Service

Section 1A. Setting Up Service 5

Voicemail Password

You’ll create your voicemail password (or passcode)

when you set up your voicemail. See “Setting Up Your

Voicemail” on page 3 for more information on your

voicemail password.

Getting Help

Managing Your Account

Online: www.nextel.com

䢇Access your account information.

䢇Check your minutes used (depending on your

service plan).

䢇View and pay your bill.

䢇Enroll for online billing and automatic payment.

䢇Purchase accessories.

䢇Shop for the latest phones.

䢇View available service plans and options.

From Your i776 Phone

䢇Press

N to check minute usage and account

balance.

䢇Press

N to make a payment.

From Any Other Phone

䢇Nextel Customer Service: 1-800-639-6111.

䢇Business Customer Service: 1-800-390-9545

Operator Services

Operator Services provides assistance when you place

collect calls or when you place calls billed to a local

telephone calling card or third party.

䊳Press

For more information or to see the latest in products

and services, visit us online at www.nextel.com.

6 Section 1B. Phone Basics

Section 1B

Phone Basics

⽧Your Phone (page 6)

⽧Getting Started With Your Phone (page 8)

⽧Features of Your Phone (page 15)

⽧Navigating Through Phone Menus and Options (page 18)

⽧Displaying Your Phone Number and Direct Connect

Number (page 19)

⽧Entering Text (page 21)

⽧Accessories (page 25)

Your phone is packed with features that simplify your life and

expand your ability to stay connected to the people and

information that are important to you. This section will guide

you through the basic functions and calling features of

your phone.

Your Phone

21. External

Display Screen

12. Display Screen

7. Charger

Connector

14. Smart Button

16. Camera Lens

17. Volume

Button

1. Left

Softkey 11. Right Softkey

4. Navigation

Key

9. End/Power Key3. Talk Key

10. Camera Key2. Menu Key

15. Speaker Button

18. Direct Connect

Button

5. Headset

Jack

8. OK key

6. Speaker/Microphone

13. Antenna

20. Messaging LED

19. Bluetooth LED

Phone Basics

Section 1B. Phone Basics 7

Key Functions

1. Left Softkey ( )-lets you select softkey actions or

menu items corresponding to the bottom left line

on the display screen.

2. Menu (M) lets you access the phone’s menu from

standby mode and allows you to access context-

sensitive menus from other screens.

3. Talk Key (N) allows you to place or receive calls,

answer Call Waiting, or use Three-Way Calling.

4. Navigation Key scrolls through the phone’s menu

options and acts as a shortcut key from standby

mode.

䡲Press Up to access Ringtones.

䡲Press Down to access Recent Calls.

䡲Press Right to launch Java Applications.

䡲Press Left to access Net.

5. Headset Jack allows you to plug in either a stereo

headset or an optional headset for convenient,

hands-free conversations. Your Direct Connect

headset can only use this connector.

6. Speaker/Microphone lets you hear the caller and

automated phone prompts when using

speakerphone mode and allows other callers to

hear you clearly when you are speaking to them.

7. Charger Connector allows you to connect your

battery charger or other accessories to your

phone.

8. OK Key (r) selects the highlighted choice when

navigating through a menu.

9. End/Power Key (P) allows you to end calls, return to

standby mode, or turn the phone on or off.

10. Camera Key (e) allows you to activate the phone’s

built-in camera.

11. Right Softkey (-) lets you select softkey actions

corresponding to the bottom right line on the display

screen.

12. Display Screen displays all the information needed to

operate your phone, such as the call status, the

Contacts list, the date and time, and the signal and

battery strength.

WARNING Inserting an accessory into the incorrect jack

may damage the phone.

Phone Basics

Section 1B. Phone Basics 9

After you’ve completed these items, you are ready to

begin using your new phone.

Your SIM Card

Locating the SIM Card

Your SIM (Subscriber Identity Module) card is a small

card inserted into the SIM card holder within your

phone behind the battery area.

If no SIM card came with your phone, contact Nextel

Customer Service at 1-800-639-6111.

Most users will never need to remove or insert the SIM

card. However, if you wish to, follow the instructions in

“Removing and Inserting the SIM Card” on page 9.

Removing and Inserting the SIM Card

To remove your SIM card:

1. With your phone powered off, remove the battery

door and battery. See “Removing the Battery” on

page 12.

2. Lift the rubber flap directly above the SIM card

holder, and then with your fingernail, carefully slide

the SIM card out from under the edge.

Important The SIM card is designed for optimal

Contacts storage and feature use. For Nextel

SIM card compatibility information, visit

www.nextel.com/sim.

In some cases, Contacts and Groups may not

be accessible if you move your SIM card to

another phone. Contacts and Groups created

with your i776 phone may not be readable by

an older iDEN SIM-based phone.

Important To avoid losing information stored in your SIM

card, do not remove it from your phone

unless absolutely necessary.

Phone Basics

Section 1B. Phone Basics 11

Installing the Battery

1. With your thumbs, press down on the battery cover

on the back of your phone and slide it up toward

the antenna to release it.

2. Remove the battery cover from the back of the

phone

3. Insert the battery into the opening, making sure the

connectors align. Gently press down to secure the

battery.

Note Long backlight settings, searching for service, vibrate

mode, browser use, and other variables may reduce

the battery’s talk and standby times.

Tip Watch your phone’s battery level indicator and

charge the battery before it runs out of power.

12 Section 1B. Phone Basics

4. Replace the battery cover and press down until

you hear a click.

Removing the Battery

1. Make sure the power is off so that you don’t lose

any stored numbers or messages.

2. Remove the battery cover and remove the battery

from the phone.

Charging the Battery

Charge your battery as soon as possible so you can

begin using your phone.

Keeping track of your battery’s charge is important. If

your battery level becomes too low, your phone

automatically turns off, and you will lose any

information you were just working on. For a quick

check of your battery level, glance at the battery charge

indicator located on your display screen.

Always use a Nextel-approved or Motorola-approved

desktop charger, travel charger, or vehicle power

adapter to charge your battery.

WARNING Do not handle a damaged or leaking Li-Ion

battery as you can be burned.

Phone Basics

Section 1B. Phone Basics 13

Using the Phone Charger

䊳Plug the flat end of the charger into the phone’s

charger connector and the other end into an

electrical outlet.

●Your display screen lets you know the battery

is charging.

●Both the battery icon and a text message

show the charging status.

With the approved Li-Ion battery, you can recharge the

battery before it becomes completely run down.

Battery Use and Battery Safety

䢇Motorola recommends you always use Motorola-branded

batteries and chargers. The warranty does not cover

damage caused by non-Motorola batteries and/or

chargers.

䢇Battery usage by children should be supervised.

WARNING Use of an unqualified battery or charger

may present a risk of fire, explosion, leakage,

or other hazard. Improper battery use, or

use of a damaged battery, may result in a

fire, explosion, or other hazard.

14 Section 1B. Phone Basics

䢇New batteries or batteries stored for a long time may

take more time to charge.

䢇Charging precautions: When charging your battery,

keep it near room temperature. Never expose

batteries to temperatures below 0°C (32°F) or above

45°C (113°F) when charging. Always take your

mobile device with you when you leave your vehicle.

䢇When storing your battery, keep it in a cool, dry

place.

䢇It is normal for battery life to decrease over time, and

for the battery to exhibit shorter runtime between

charges or require more frequent or longer charging

times.

䢇Avoid damage to battery and mobile device. Do not

disassemble, open, crush, bend, deform, puncture,

shred, or submerge the battery or mobile device.

Avoid dropping the battery or mobile device,

especially on a hard surface. If your battery or mobile

device has been subjected to such damage, take

it to a Motorola Authorized Service Center before

using. Do not attempt to dry it with an appliance or

heat source, such as a hair dryer or microwave oven.

䢇Use care when handling a charged battery — particularly

when placing it inside a pocket, purse, or other

container with metal objects. Contact with metal

objects (e.g., jewelry, keys, beaded chains) could

complete an electrical circuit (short circuit), causing

the battery to become very hot, which could cause

damage or injury.

Important Motorola mobile devices are designed to

work best with qualified batteries. If you see a

message on your display such as Invalid

Battery or Unable to Charge, take the

following steps:

• Remove the battery and inspect it to

confirm that it bears a Motorola “Original

Equipment” hologram;

• If there is no hologram, the battery is not

a qualified battery;

• If there is a hologram, replace the battery

and retry charging it;

• If the message remains, contact a

Motorola Authorized Service Center.

Phone Basics

Section 1B. Phone Basics 15

Promptly dispose of used batteries in

accordance with local regulations. Contact your

local recycling center for proper battery

disposal.

Turning Your Phone On and Off

Turning Your Phone On

䊳Press and hold P for approximately two seconds.

As your phone connects to the network, you see a

connecting message. Your phone may require you to

enter identifying information to use it or to access

specific features.

Turning Your Phone Off

䊳Press and hold P for two seconds until you see

the powering down animation on the display

screen.

Your screen remains blank while your phone is off

(unless the battery is charging).

Features of Your Phone

The i776 is easy to use, and reliable, and it offers many

features and service options. This list previews some of

those features and provides page numbers where you

can find out more:

䢇Nextel Direct Connect provides instant, coast-to-coast

2-way “walkie-talkie-style” communication at the

click of a button (page 36).

䢇Nextel Direct Talk allows for two-way radio

communication “off the network” between two or

more phones equipped with this capability

(page 55).

䢇Text Messaging (also known as Multimedia

Messaging), provides quick and convenient

messaging capabilities (page 154).

䢇Built-in Speakerphone allows you to enjoy easy

hands-free communication.

䢇Games, ringers, screen savers, and other applications can

be downloaded to make your phone as unique as

you are (page 185). Additional charges may apply.

WARNING Never dispose of batteries in a fire because

they may explode.

16 Section 1B. Phone Basics

䢇Your Contacts list allows you to store up to 600

entries, with several numbers or addresses per entry

(page 98).

䢇The built-in Datebook offers several personal

information management features to help you

manage your busy lifestyle (page 106).

䢇The GPS Enabled feature works in connection with

available location-based services (page 118).

䢇Word English Text Input lets you quickly type messages

with one keypress per letter (page 21).

䢇Bluetooth® capability that allows you to wirelessly

connect to other Bluetooth enabled devices

(page 138).

䢇Speed dial lets you dial phone numbers quickly

(page 35).

Viewing the Status Information

Your phone’s display screen provides information

about your phone’s status and options. This list

identifies the symbols you’ll see on your phone’s

display screen:

abc

def

Battery Strength — A fuller battery indicates a

greater charge.

opq

Signal Strength — More bars next to the

antenna indicate a stronger signal.

6No Service — Your phone is without service.

You cannot make or receive any type of call.

APhone In Use — Your phone is active on a

phone call.

BDirect Connect In Use — Your phone is active

on a Direct Connect call.

SGroup In Use — Your phone is active on a

Group Connect call.

nDirect Talk — Your phone is off network and

set to Direct Talk mode.

CTalkgroup In Use — Your phone is active on a

Talkgroup call.

Phone Basics

Section 1B. Phone Basics 17

BBluetooth In Use — Your phone is using

Bluetooth. If this icon is blinking, then your

phone is in discoverable mode. If this icon is

static, your phone is active in a Bluetooth

connection.

12 Active Phone Line — 1 indicates phone line 1

is ready to make calls; 2 indicates phone

line 2 is ready to make calls.

GLI

JHK

Call Forward — Your phone is set to forward

calls. See “Call Forwarding” on page 176.

Ringer Off — Your phone is set to not ring.

See “Vibrate All” on page 67.

uSpeaker Off — Direct Connect sound is set to

come through the earpiece rather than

through the speaker.

Messages — You have one or more

messages. See “Message Center” on

page 150.

QRS

TUV

Text Input — You are using one of the phone’s

text entry methods. See “Selecting a Text

Input Mode” on page 21.

DE Internet — You are ready to browse the

Internet or are browsing the Internet using a

secure connection. See “Data Services” on

page 182.

9Transmitters — Your phone is set not to

receive calls and other transmissions. See

“Temporarily Turning Off Transmissions

(Airplane Mode)” on page 73.

Y Z Packet Data — You are ready to transfer

packet data or are transferring packet data.

See “Using Your Phone as a Modem” on

page 185.

N O TTY — You are ready to use your phone to

make calls using a teletypewriter device.

See “Telecommunications Relay Service” on

page 179.

18 Section 1B. Phone Basics

Navigating Through Phone Menus

and Options

The navigation key on your phone lets you scroll

through menus quickly and easily.

To navigate through a list-type menu, simply press your

navigation key up or down. The scroll bar at the right of

the menu keeps track of your position in the menu at

all times.

For a diagram of your phone’s menu, please see “Your

Phone’s Menu” on page ii.

Many features provide context-sensitive menus that let

you access related features and actions. This icon S

appears any time a context-sensitive menu is available.

Press M to access the menu

Selecting Menu Items

As you navigate through the menu, menu options are

highlighted. Select an item by highlighting it and

pressing r .

For example, to view your text messages:

1. Press M to access the main menu.

2. Select Messages by highlighting Messages and

pressing r.

3. Select Inbox by highlighting it and pressing r.

(If you have any text messages, they are displayed.)

7Hearing Aid — Your phone is set for use with a

hearing aid and is active on a phone call.

See “Using Your Phone With a Hearing Aid

Device” on page 193.

cVoice Record — You have one or more voice

records stored. See “Voice Records” on

page 126.

Tip When scrolling through the main menu, it may be

necessary to select More to view additional main

menu options. Depending on which menu view

you’re using, either highlight More and press r or

press More (right softkey).

Note For the purposes of this guide, the above steps

condense into “Press M > > Messages Inbox.”

Phone Basics

Section 1B. Phone Basics 19

Backing Up Within a Menu

To go to the previous menu:

䊳Press Back (right softkey).

To return to standby mode:

䊳Press P.

Shortcuts and Personalized Keys

In standby mode, your phone gives you ways to quickly

access features you use frequently:

䢇Use the Shortcuts feature (page 80) to quickly access

most menu options by pressing a number on your

keypad or saying the voice name of the shortcut.

䢇Use the Personalize feature (page 62) to assign main

menu items to the navigation keys, softkeys, r, and

M, as well as setting a main menu item to appear

when your turn on your phone.

Help

Your phone contains an in-device help program to

help you understand complicated or seldom used

features. When you access a feature, Help sometimes

appears as a menu item or softkey. Select Help and

read the text for a quick overview of the feature. For

more information, refer to this guide.

Displaying Your Phone Number and

Direct Connect Number

My Info

My Info lets you view your phone number, Direct

Connect number, and other phone information.

To view information about your phone:

1. Press

> My Info.

2. Press r.

3. Scroll to see your information:

䡲My Name — You can enter your name here.

䡲Line 1 and Line 2 — your phone numbers for

phone lines 1 and 2. Each number appears when

you receive your alert notification after enabling

security on your phone.

Note You may need to select More to display My Info.

Phone Basics

Section 1B. Phone Basics 23

Characters scroll in the following order:

Entering Symbols, Numbers, and Quick

Notes

To enter symbols:

䊳Select the Symbols mode. (See “Selecting a Text

Input Mode” on page 21.) To enter a symbol, press

the appropriate key indicated on the display.

To enter numbers:

䊳Select the Numeric mode and press the appropriate

key. (See “Selecting a Text Input Mode” on

page 21.)

To enter Quick Notes:

1. From a text entry screen, press QNotes (left softkey).

2. Select a message and press r.

English Sequence

Key

Space . ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥

A B C 2 Á Ã Â À Ç

D E F 3 É Ê È

G H I 4 Í Ì

J K L 5

M N ñ O 6 Ó Õ Ô Ò

P Q R S 7 ß

T U V 8 Ú Ü Û Ù

W X Y Z 9

+ - 0 * / \ [ ] = > < # §

Space Shift Caps Lock

Back

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Tip To add a quick note after you have already started

entering a message, press M, select

Add QNotes,

and select a message.

Note Quick Notes preset messages make composing text

messages easier by allowing you to enter quick

messages, such as “Meet me at,” “Let’s get lunch,” or

a customized message of your own.

24 Section 1B. Phone Basics

Special Function Keys

Some of the phone’s keys assume different functions

while in Alpha or Word mode.

Spaces

Press # for a space.

Capitalization

When you press and hold the # key, it acts as a

three-way toggle. Press and hold # to make the next

letter typed uppercase (shift), to make all subsequent

letters typed uppercase (caps lock), or to go back to

lowercase letters.

These icons appear:

When none of these icons appear, letters typed are

lowercase. Scrolling up after typing a letter makes that

letter uppercase.

Your phone automatically makes the first letter of a

sentence uppercase.

Punctuation

Press 1 0 or to insert punctuation. Continue to press

the key to view the list of symbols available through that

key. Pause to select the symbol you want.

R U or Shift is on.

S V or Caps lock is on.

Note When creating a text message, you may not be able

to make a letter uppercase by scrolling up,

depending on the type of text message and the text

entry mode.

Note Additional punctuation symbols are available in

Symbols mode.

28 Section 2A. Making and Answering Calls

Section 2A

Making and Answering Calls

⽧Types of Calls (page 28)

⽧Making and Answering Phone Calls (page 29)

⽧Making and Answering Direct Connect Calls (page 36)

⽧Making and Answering Group Connect Calls (page 39)

⽧Nextel Direct Send (page 44)

⽧Making and Answering Talkgroup Calls (page 51)

⽧Call Alerts (page 53)

⽧Making and Answering Direct Talk Calls (page 55)

Your i776 phone offers many different ways to connect to your

family, friends, and associates. In addition to traditional

wireless phone calls, you can make Nextel Direct

Connect calls to both individuals and groups,

participate in Talkgroups, use Nextel Direct Talk, and

send Call Alerts.

Types of Calls

With the Nextel National Network, Nextel Direct

Connect, and your i776 phone, you have the following

traditional wireless phone and Nextel Direct Connect

services available to you:

䢇Digital Wireless Phone Calls offer clear calls and many

extra services, including missed call notification,

Three-Way Calling, speakerphone, and speed dialing

(page 29).

䢇Direct Connect Calls allow two-way radio

communication with other Nextel Direct Connect

users within the Nextel National Network (page 36).

䢇Group Connect Calls allow coast-to-coast two-way

radio calling to up to 20 Nextel Direct Connect

customers simultaneously (page 39).

䢇Nextel Direct Send allows you to send contact

information about yourself and others in Nextel Direct

Connect calls and Nextel Group Connect calls and

send pictures in Nextel Direct Connect calls

(page 44).

Making Calls

Section 2A. Making and Answering Calls 29

䢇Talkgroup Calls allow two-way radio calling to up to

100 Nextel Talkgroup customers simultaneously

(page 51).

䢇Nextel Direct Talk allows for two-way radio

communication “off the network” between two or

more phones equipped with this capability

(page 53).

Making and Answering Phone Calls

Making Calls

Placing a traditional wireless phone call from your i776

is as easy as making a call from any landline phone.

1. Make sure your phone is on.

2. Enter a phone number from standby mode. (If you

make a mistake while dialing, press Delete [right

softkey] to erase the numbers.)

3. Press N.

4. Press P when you are finished.

You can also place calls from your phone by using

Voice Names (page 35), speed dialing numbers from

your Contacts (page 35), and using your Recent Call

list (page 34).

Answering Calls

1. Make sure your phone is on.

2. Press N to answer an incoming call.

Depending on your settings, you may also answer

incoming calls by opening the phone, or pressing any

number key. See “Call Answer Mode” on page 82 for

more information.

Note To learn more about the differences between Nextel

Group Connect calls and Talkgroup calls, please see

“Difference Between Group Connect and Talkgroup

Calls” on page 51.

Tip To redial your last outgoing call, press and hold N.

Note When your phone is off, calls go directly to voicemail.

30 Section 2A. Making and Answering Calls

Your phone notifies you of incoming calls in the

following ways:

䢇The phone rings or vibrates.

䢇The indicator light flashes.

䢇The backlight illuminates.

䢇The screen displays an incoming call message.

If the incoming call is from a number stored in your

Contacts, the entry’s name is displayed. The caller’s

phone number may also be displayed, if available.

Ending a Call

䊳To end a call press P or close the phone.

Sending a Call to Voicemail

䊳Press P, press No (right softkey), or press the

Smart Button.

Missed Phone Calls

Missed phone calls are forwarded to voicemail. When

an incoming call is not answered, a Missed Call

notification is displayed on your screen.

To display the Missed Call entry from the notification screen:

䊳Press View (left softkey). (To dial the phone number,

press N after displaying the call entry.)

To display a Missed Call entry from standby mode:

1. Press M > Recent Calls. (You may also be able to

press the navigation key down to display Recent

Calls.)

2. Select the entry you wish to view and press r.

Calling Emergency Numbers

Your phone supports emergency calling. Emergency

phone calls can be made even when your SIM card is

blocked or not in your phone.

䊳Dial 911 and press N to be connected to an

emergency response center. If you are on an active

call, you must end it before calling 911.

Tip When the phone is closed, you can answer a call by

pressing

To set the phone to answer and end calls by opening

and closing the phone, press M > Settings >

Phone Calls > Flip Activation and set Flip To Ans and

Flip To End to On.

Making Calls

Section 2A. Making and Answering Calls 31

When you make an emergency call, your phone’s GPS

Enabled feature can help emergency service

personnel find you, if you are in a location where your

phone's GPS antenna has established a clear view of

the open sky and your local emergency response

center has the equipment to process location

information. See “GPS Enabled” on page 118, and

particularly “IMPORTANT: Things to Keep in Mind” on

page 119 and “Making an Emergency Call” on

page 120, for more information on the limitations of this

feature. Because of the limitations of this feature, always

provide your best knowledge of your location to the

emergency response center when you make an

emergency call.

Important Always report your location to the 911 operator

when placing an emergency call. Some

designated emergency call takers, known as

Public Safety Answering Points (PSAPs) may not

be equipped to receive GPS location information

from your phone.

Emergency calls cannot be placed while the

keypad is locked.

If you have not registered on the network,

emergency calls cannot be placed while your

SIM card is in your phone.

If you are bringing your phone number to Nextel

from your previous carrier, you may receive a

temporary telephone number while your Nextel

phone is being programmed with your

permanent phone number. If you make a call to

911 and the call fails, the 911 emergency

response center will not be able to call you back

on your Nextel phone if in the meantime, your

Nextel phone has been programmed with your

permanent telephone number. If the call is

disconnected before location and details have

been provided, call 911 again and advise that you

were disconnected.

32 Section 2A. Making and Answering Calls

In-Call Options

Pressing M during a call displays a list of available

in-call features. To select an option, highlight the option

and press r. The following options may be available

through the Options menu:

䢇Hold to place the call on hold.

䢇3 Way to initiate a three-way call.

䢇Use Bluetooth to switch from the phone’s microphone

to a Bluetooth device.

䢇2nd Call to place a second.

䢇Contacts to display your Contacts list.

䢇Recent Calls to display Recent Calls list.

䢇My Info to display your phone’s Information.

䢇Memo to display the phone’s electronic notepad.

䢇Datebook to enter a datebook event.

䢇Messages to create a message.

䢇Store to store a new contact.

䢇Record to record the phone call.

䢇GPS to enter the GPS application.

䢇In Call Setup to modify the in-call features.

Press Spkr (right softkey) during a call to route the

phone’s audio through the speaker or the earpiece.

Press Mute (left softkey) during a call to mute the

microphone. Press Unmute (left softkey) to unmute the

microphone.

End-of-Call Options

After you receive or make a call, the call duration is

briefly displayed. You are then automatically taken to

the Recent Calls list.

To save a number that is not in your contacts:

䊳Highlight the entry you want to add to your

Contacts and press Save (left softkey). (See “Saving

a Phone Number” on page 33.)

To view Call Details and Call Info:

1. Select a recent call.

2. Press r to view the Call Details.

3. Press r to view the Call Info.

WARNING Because of higher volume levels, do not

place the phone near your ear during

speakerphone use.

Making Calls

Section 2A. Making and Answering Calls 33

After you receive a call from or make a call to a phone

number that is already in your Contacts, you are

automatically taken to the Recent Calls list. Highlight

the Recent Calls entry and press r to view the name

of the contact, the time the call was received or made,

and the call duration.

Saving a Phone Number

Your phone can store up to 10 phone numbers in each

of 600 Contacts entries. Each entry’s name can contain

20 characters. Your phone automatically sorts the

Contacts entries alphabetically. (For more information,

see “Contacts” on page 98.)

1. Enter a phone number and press M.

2. Select Store Number and press r.

3. To store the number as a new entry, select

[New Contact] and press r to add the new entry.

– or –

Search for an existing contact name and press r

to save the new number.

4. Enter or edit information as necessary. When you

are finished press Save (left softkey) to save the

Contact.

Finding a Phone Number

To find Contacts entries you can either scroll through

the list using your navigation key or you can search

Contacts entries by name.

1. Press Contcs (left softkey).

2. Press Search (left softkey).

3. Enter the first few letters of a Contact's name and

press r. (The first contact entry that matches the

entered text will be highlighted.)

4. To display the Contacts entry, press r. To dial the

entry's default phone number, press N.

Dialing and Saving Phone Numbers With

Pauses

You can dial or save phone numbers with pauses for

use with automated systems, such as voicemail or

credit card billing numbers.

Note The End-of-Call options are not displayed for calls

identified as No ID or Restricted.

34 Section 2A. Making and Answering Calls

There are two types of pauses available on your phone:

䢇Wait sends the next set of numbers when prompted.

䢇Pause automatically sends the next set of numbers

after three seconds.

To dial or save phone numbers with pauses:

1. Enter the phone number.

2. Press and hold * until the letter P appears. The P

represents a three-second pause. If you want a

pause longer than three seconds, press and hold

* more than once. Each P represents a three-

second pause.

– or –

Press and hold * until the letter W appears. The

W means your phone waits before dialing further. A

message appears asking if you want to send the

rest of the digits.

3. Enter additional numbers.

4. Press N to dial the number.

– or –

Press M > Store Number to save the number in

your Contacts.

Dialing From the Contacts List

1. Press M .> Contacts

2. Highlight the entry you want to call and press N to

dial the entry’s default phone number.

– or –

To dial another number from the entry, highlight

the name, press the navigation key right or left until

the correct number type appears, and then

press N.

Making a Call From Recent Calls

If you have numbers stored in the Recent Calls list, you

can use these numbers to make calls. For information

on the Recent Calls list, see “Recent Calls” on page 92.

Note You can have multiple pauses in a phone number

and combine waits and pauses.

Note When dialing a number with a wait, press Yes (left

softkey) to send the next set of numbers.

Shortcut From standby mode, press Contacts (left

softkey) to list entries.

Making Calls

Section 2A. Making and Answering Calls 35

1. Press M > Recent Calls.

2. Select an entry and press N.

– or –

Press the Direct Connect button to make a Direct

Connect or Group Connect call.

Making a Phone Call Using a Voice Name

If you have created a voice name in Contacts for the

number you want to call (see page 101), say the voice

name into your phone to enter the number.

1. Press and hold

until a prompt appears telling

you to say the voice name.

2. Speaking into the microphone, say the voice name

assigned to the number you want to call. Your

phone plays the name back to you.

3. The call is placed automatically.

Using Speed Dialing

Each phone number stored in Contacts is assigned a

Speed Dial number, which you can use to call that

number. You can store up to 600 numbers in your

phone’s speed dial memory.

To use speed dialing:

1. Enter a speed dial number and then press #.

2. Press N to dial the number.

To use Turbo Dial® for speed dial locations 1–9:

䊳Press and hold the appropriate key for

approximately two seconds. The display confirms

that the number has been dialed when it shows

“Calling...”.

Redialing the Last Number

䊳Press and hold N.

Note You cannot make calls from recent Calls to entries

identified as No ID or Restricted.

Tip To stop a phone call from being completed, press

P ( or .

36 Section 2A. Making and Answering Calls

Using Speakerphone

Turning on speakerphone makes incoming sound

come out of the phone’s speaker instead of the

earpiece. Speakerphone is available whenever you are

on an active phone call.

To turn speakerphone on or off:

䊳Press

or press Spkr (right softkey).

Using Mute

Muting calls lets you listen to incoming sound without

transmitting sound. Mute is available whenever you are

on an active call.

To turn mute on:

䊳Press Mute (left softkey).

While mute is on, Unmute appears as the left softkey

option.

To turn mute off:

䊳Press Unmute (left softkey).

Making and Answering Direct

Connect Calls

Nextel offers the following Direct Connect services:

䢇Nationwide Direct Connect allows coast-to-coast Direct

Connect calling to Nextel subscribers to and from

anywhere on the Nextel National Network (U.S.).

䢇International Direct Connect allows Direct Connect

calling to and from select countries.

䢇Group Connect allows nationwide Direct Connect

calling to up to 20 Nextel subscribers simultaneously.

(See “Making and Answering Group Connect Calls”

on page 39).

䢇Talkgroups allows Direct Connect calling to up to 100

Nextel subscribers in the same Direct Connect

network. (See “Making and Answering Talkgroup

Calls” on page 51).

See www.nextel.com for more details on these Direct

Connect services. Pricing for each of these services is

based on your service contract.

Making Calls

Section 2A. Making and Answering Calls 37

Making Direct Connect Calls

1. Enter the Direct Connect number you want to call.

(See “Dialing Nextel Direct Connect Numbers”

below.)

2. Press and hold the Direct Connect button on the

side of your phone. Begin talking after your phone

emits a chirping sound.

3. Release the Direct Connect button to listen.

A Direct Connect call ends automatically after there is

no activity on the call for several seconds.

Dialing Nextel Direct Connect Numbers

Every Direct Connect number has three parts:

䢇An area ID.

䢇A network ID.

䢇A member ID.

An asterisk separates each part (for example:

999*999*9999). When you enter a number containing

all three parts, you must separate them with asterisks.

Using Just the Member ID

If you are contacting someone sharing your network

and area IDs, you only need to enter the member ID

(the last part of the number).

1. Enter the member ID of a Direct Connect number.

2. Press and hold the Direct Connect button on the

side of your phone. Continue as you would on any

Direct Connect call.

Note The number of digits in each part of a Direct

Connect number may vary. For example, your Direct

Connect number may be formatted as

999*999*9999, while another valid number may

appear as 555*555555*55.

If you are calling or saving a Direct Connect number

for a Sprint phone with Direct Connect capabilities,

the Direct Connect number may be the same as the

wireless phone number. When saving the Direct

Connect number, insert asterisks in place of

hyphens (913*555*1234).

Tip When you store a Direct Connect number in

Contacts, be sure to include the entire number,

including the asterisks.

40 Section 2A. Making and Answering Calls

Group Connect Call With a Direct Connect

Number” on page 41.

2. Press the Direct Connect button.

Answering Group Connect Calls

䊳Proceed as if answering a Direct Connect call from

one user. Only one person at a time may speak on

a Group Connect call.

Creating Groups in Contacts

1. Press M > Contacts.

2. Select [New Group].

3. If you want to assign a name to the Group, enter

the name.

4. Add Group members. See “Adding Group

Members” on page 40.

5. If you want to create a voice name for the Group,

select [Options] > Voice Name. As directed by the

screen prompts, say and repeat the voice name

you want to assign to the Group. Speak clearly into

the microphone. When you have finished, press

Back (right softkey).

6. Press Save (left softkey).

Adding Group Members

You can add Group members that have a Direct

Connect number and Group Connect-compatible

phone to your Group by selecting them from Contacts,

the Recent Calls list, Memo, or by manually entering

the Direct Connect number from your keypad. You can

also add all members in an existing Group to another

Group by selecting the Group name from Contacts.

To add Group members from Contacts, the Recent Calls

list, or Memo:

1. While creating a Group, select [Add Member].

– or –

Select [Add Number] and press Browse (left softkey).

Note If you do not assign a name, the Group is named

“Group” followed by the number of members in the

Group. For example, “Group (8)” for a group with

eight members.

Making Calls

Section 2A. Making and Answering Calls 41

2. Scroll to the members you want from Contacts and

press r. To chose a number from the Recent

Calls list, or Memo, press M. A checkmark

appears next to each selected member.

3. Press Done (left softkey) and then press Save (left

softkey) to save the group.

To add Group members manually from the keypad:

1. While creating a Group, select [Add Number].

2. Enter the Direct Connect number using the

keypad.

3. Press r and then press Save (left softkey) to save

the group.

Starting a Group Connect Call With a

Direct Connect Number

1. Press M > Direct Connect, choose the Contacts

entries containing the Direct Connect numbers you

want in the Group Connect call, and go to step six.

(To add members or numbers from Recent Calls

or Memo, go to step four.)

– or –

From standby mode, enter the Direct Connect

number.

– or –

From Contacts or Recent Calls, scroll to an entry

containing the Direct Connect number.

2. Press M.

3. Select Call New Group.

4. Add more Group members. See “Adding Group

Members” on page 40.

Note To move between Contacts, the Recent Calls list, and

Memo, scroll left or right, or press * or #.

Note To deselect a member, scroll to a selected member

and press r.

42 Section 2A. Making and Answering Calls

5. If you want to save the Group you have created,

press M and select Store Group.

– or –

If you do not want to save the Group, press

Done (left softkey).

6. To make the call, press the Direct Connect button.

Removing Members or Groups

To remove a member from a Group:

1. From Contacts, scroll to the Group you want to

delete the member from.

2. Press Edit (left softkey).

3. Scroll to the member you want to remove.

4. Press M.

5. Select Remove Member.

6. Press Save (left softkey).

To remove all members from a Group:

1. From Contacts, select a Group.

2. Press Edit (left softkey).

3. Press M.

4. Select Remove All.

5. Press Yes (left softkey).

To delete a Group from Contacts:

1. From Contacts, highlight a Group.

2. Press M.

3. Select Delete Group.

4. Press Yes (left softkey).

Storing Groups

To store a group to Contacts from the Recent Calls list:

1. From the Recent Calls list, select a Group.

2. Press Save (left softkey).

3. If you want, add more information to the entry.

4. Press Save (left softkey).

Making Calls

Section 2A. Making and Answering Calls 43

To store a group to Contacts from an active Group Connect

call:

1. During an active Group Connect call, press M.

2. Select Store Group.

3. If you want, add more information to the entry.

4. Press Save (left softkey).

Storing Members of Groups

To store a member from the Recent Calls list or within

Contacts:

1. Display the Group containing the number or

member you want to store.

2. Press M.

3. Select Store Number.

4. Select the number or member you want to store.

5. If you want, add more information to the entry.

6. Press Save (left softkey).

To store a member from an active Group Connect call:

1. During an active Group Connect call, press M.

2. Press M.

3. Select Store Number.

4. Select the number or member you want to store.

5. If you want, add more information to the entry.

6. Press Save (left softkey).

Group Connect Call Information

While you are in a Group Connect call, the following

appears on the screen:

䢇The name of the Group.

䢇The name or the Direct Connect number of the

person speaking.

䢇The number of members who are participating in the

Group Connect call.

Note You cannot record a voice name during an active

call.

Note You cannot record a voice name during an active

call.

44 Section 2A. Making and Answering Calls

Group Connect Call Details

During a Group Connect call, you can view details

about the other group members, such as their name or

Direct Connect number, and their status on the call.

To view Group Connect call details:

䊳Press Details (left softkey).

In the Details view, these icons appear next to member

names or Direct Connect numbers:

Nextel Direct Send

Nextel Direct Send lets you exchange pictures, My Info,

contact information, and Groups with other phones that

have this capability. You do this through Direct Connect

calls.

Nextel Direct Send cannot be used during Talkgroup

calls. Pictures cannot be sent in Group Connect calls.

Sending a Picture

When you send a picture using Nextel Direct Send, the

picture you send appears on the display of the phone

you are engaged in the Direct Connect call with, and is

saved by that phone.

Sending a Picture During a Call

You can send a picture at any time during a Direct

Connect call, whether you made or received the call*.

* Additional charges may apply.

TThe member of the Group who is

speaking.

AA member of the Group who is active on

the Group Connect call, but not speaking.

OA member of the Group who has exited

the call.

UA member of the Group who could not be

reached on the Group Connect call.

uA member of the Group whose status is

unknown.

Making Calls

Section 2A. Making and Answering Calls 45

You cannot talk or listen on a Direct Connect call while

a picture is being transmitted. Other activities, such as

searching for a picture, do not prevent you from talking

or listening.

To send a picture during a call:

1. While in a Direct Connect call, press Picture (right

softkey). A list of pictures that can be included in a

Direct Connect call appears.

2. Select the picture you want to send.

3. Press the Direct Connect button to send the

picture.

4. Wait while the picture is transmitted. The Direct

Connect call is temporarily interrupted while a

picture is transmitted.

5. When prompted, press the Direct Connect button

to resume the Direct Connect call.

Starting a Call by Sending a Picture

You can start a call by choosing a stored picture from

the Media Center.

To do this, you must have the Direct Connect number

and IP address of the person you want to send to

stored in your Contacts.

To start a call by sending a picture:

1. Press M > Media Center and then scroll to or select

the picture you want to send in a Direct Connect

call.

2. Press M.

3. Select Send Via... > Send via PTT.

4. Select A Contact or A Recent Call. These names have

Direct Connect numbers and IP addresses stored.

5. Select the name of the person you want to send

the picture to.

Note The first time you send a stored picture after turning

the phone on, the message Picture Fees May Apply

appears and you are prompted to respond. Press

Yes (left softkey) to send the picture. Press No (right

softkey) to not send the picture.

Tip When a person sends you My Info from his or her

phone, including his or her Direct Connect number

and IP address, you can then easily store this

information to Contacts from the Recent Calls list

46 Section 2A. Making and Answering Calls

6. Press the Direct Connect button to send the

picture.

7. Wait while the picture is transmitted. The Direct

Connect call is temporarily interrupted while a

picture is transmitted.

8. When prompted, press the Direct Connect button

to resume the Direct Connect call.

Receiving a Picture

When someone sends you a picture using Nextel

Direct Send, your phone emits a tone or vibrates and a

message appears on the display asking you if you

want to accept the picture.

Pictures you receive are saved to your phone’s memory

and are accessible through the Media Center.

When you receive a picture, it appears every time you

are in a Direct Connect call with the person who sent it

unless you delete the picture from the Media Center.

This occurs for the last 20 people who sent you

pictures.

Accepting a Picture

1. When you see the message asking you if you want

to accept the picture, press Yes (left softkey).

2. Wait while the picture is transmitted. The Direct

Connect call is temporarily interrupted while a

picture is transmitted.

3. When prompted, press the Direct Connect button

to resume the Direct Connect call.

Declining a Picture

䊳When you see the message asking you if you want

to accept the picture, press No (right softkey).

The picture is not transmitted.

Note The first time you accept a stored picture after

turning the phone on, the message Messaging

Fees May Apply appears and you are prompted to

respond. Press Yes (left softkey) to accept the

picture. Press No (right softkey) to not accept the

picture.

Tip If you want to stop the transmission before it is

finished, press Cancel (right softkey).

Making Calls

Section 2A. Making and Answering Calls 47

Setting Picture Capability

To turn your phone’s ability to send and receive pictures in

Direct Connect calls on or off:

1. Press M > Settings > DC/GC Options >

On/Off Settings.

2. Select Pictures and press r to check or uncheck

the box.

3. Press Done (left softkey) to save the setting.

This setting does not affect your phone’s ability to send

and receive My Info or contact information.

Sending My Info and Contact Information

When you send My Info or contact information using

Nextel Direct Send, the information you send appears

on the display of the phone you are engaged in the

Direct Connect call with. After the call, the information

appears on the Recent Call list of that phone.

Sending My Info

You can control what portion of the information in My

Info is sent and whether it is sent automatically in every

Direct Connect call or only when you choose to send it.

The information your phone sends always includes My

Name and Direct Connect.

It may include Line 1, Line 2, and Carrier IP depending on

the options provided by your service provider and how

you set your sending options.

The default setting is Line 1 only.

To change which fields are sent:

1. Press M .> My Info

2. Press M.

3. Select Direct Send Setup > Info To Send.

Tip When you send My Info, certain information, such as

your email address or fax number, cannot be

included. To send complete contact information,

create an entry for yourself in Contacts and send it.

48 Section 2A. Making and Answering Calls

4. A checkmark appears next to the fields that will be

sent. To add or remove the checkmark, select the

field.

5. When you are finished, press Done (left softkey).

To control whether your information is sent automatically:

1. Press M .> My Info

2. Press M.

3. Select Direct Send Setup > Auto Send.

4. Select On to send your information automatically,

or Off to send your information only when you

choose to send it.

To send My Info during a call:

1. While in a Direct Connect call, press M.

2. With Direct Send My... highlighted, press r.

3. When Ready to Send appears on the display, press

the Direct Connect button to send the information.

To start a call by sending My Info:

1. Press M .> My Info

2. Press M.

3. With Direct Send My Info highlighted, press r.

4. Use the keypad to enter the Direct Connect

number you want to send the information to.

– or –

Press Browse (left softkey). Select Contacts, Recent

Calls, or Memo. Select the number you want to

enter.

5. When Ready to Send appears on the display, press

the Direct Connect button to send the information.

Sending Contact Information

You can send contact information by selecting a

Contacts entry.

Contacts entries that contain only addresses cannot be

sent. When Contacts entries are received, they do not

include ring tones or pictures.

Note When you receive your phone, it is set to send your

information automatically.

Making Calls

Section 2A. Making and Answering Calls 49

To send contact information during a call:

1. While in a Direct Connect call, press M.

2. Select Contacts.

3. Scroll to the Contacts entry you want to send and

select Send Via... > Send via PTT.

4. When Ready to Send appears on the display, press

the Direct Connect button to send the contact

information.

To start a call by sending contact information:

1. From Contacts, scroll to or select the entry you

want to send.

2. Press M and select Send Via... > Send via PTT.

3. Use the keypad to enter the Direct Connect

number you want to send the contact to.

– or –

Press Browse (left softkey). Select Recent Calls,

Contacts, or Memo. Select the number you want to

enter.

4. When Ready to Send appears on the display, press

the Direct Connect button to send the contact

information.

Receiving My Info or Contact Information

When you receive My Info or contact information from

another phone, an icon appears on the display.

To view the information while still in the Direct Connect call:

1. Press M.

2. Select View Contact.

Note If the Contacts entry you scrolled to is a Group, you

may be prompted to allow yourself to be a part of the

group being sent. Press Yes (left softkey) to become

part of the group.

Note If the Contacts entry you scrolled to is a Group, you

may be prompted to allow yourself to be a part of the

group being sent. Press Yes (left softkey) to become

part of the group.

jMy Info

dContact Information

52 Section 2A. Making and Answering Calls

Joining a Talkgroup

To participate in a Talkgroup, the account administrator

must first add you to the membership and then you

must “join” the Talkgroup.

1. Press Contacts (right softkey).

2. Scroll to the Talkgroup you want to join.

3. Press Join (left softkey).

You can now receive communications from other

members of this Talkgroup.

You will hear all active Talkgroup conversations on your

phone. To silence them, press M > Settings >

DC/GC Options > Tkgrp Silent and then select On.

Adding More Talkgroups

You can be included in additional Talkgroups by doing

one of the following:

䢇Using Talkgroup Management at www.nextel.com. You

must be an account administrator to use Talkgroup

Management.

䢇Contacting your Nextel Sales Representative at the

time of activation.

Making Talkgroup Calls

1. Press # and then enter the Talkgroup number

using the keypad.

– or –

Select the Talkgroup from Contacts or the Recent

Calls list.

2. Press the Direct Connect button and continue as if

making a Direct Connect call.

Receiving Talkgroup Calls

䊳Answer it as you would a regular Direct Connect

call.

Only one person at a time may speak on a Talkgroup

call. The Direct Connect number or name of the person

who is speaking appears on the display screen below

the Talkgroup number.

During and immediately after a Talkgroup call ends,

press Options (right softkey). Your phone displays

actions you can take at this time.

Making Calls

Section 2A. Making and Answering Calls 53

Call Alerts

Sending a Call Alert lets the recipient know you want to

talk to him or her on a Nextel Direct Connect call. When

you send a Call Alert, the recipient’s phone alerts them

and displays your name or Direct Connect number.

Sending Call Alerts

1. Enter the Direct Connect number you want to send

the alert to.

2. Press Alert (left softkey).

3. When “Ready to Alert” appears, press the Direct

Connect button to send the Call Alert.

Responding to a Call Alert

To answer a Call Alert:

䊳Press the Direct Connect button to make a Direct

Connect call to the sender.

To clear a Call Alert:

䊳Press Clear (right softkey).

To store a Call Alert in the Call Alert queue:

䊳Press Queue (left softkey).

Note You can send a Call Alert from Recent Calls or

Contacts. Find the Direct Connect number you want

to send a Call Alert to and continue as explained

above.

Note You can set a distinctive ringer for Call Alerts. See

“Ring Tones” on page 65.

Note The Recent Calls list also stores Call Alerts you have

received. They appear as Direct Connect calls. Call

Alerts remain in your Recent Calls list until you delete

them or until they reach the end of the list.

Making Calls

Section 2A. Making and Answering Calls 55

Deleting Call Alerts

To delete a Call Alert from the queue:

1. From the Call Alert queue, scroll to the Call Alert

you want to delete.

2. Press M.

3. Select Delete.

4. Press r or press Yes (left softkey) to confirm.

To delete all Call Alerts from the queue:

1. From the Call Alert queue, press M.

2. From the Call Alert menu, select Delete All.

3. Press r or press Yes (left softkey) to confirm.

Making and Answering

Direct Talk Calls

Nextel Direct Talk allows for two-way radio

communication “off the network” between two or more

phones equipped with this capability. This feature is

very useful in areas without network coverage.

You can make:

䢇Code calls – two-way radio calls conducted off the

network and using open channels and codes. In

these calls, anyone using your same channel and

code can hear your conversation.

䢇Private calls – two-way radio calls conducted off the

network and using the wireless phone numbers of

the participants. In these calls, others using the same

channel cannot listen in.

When using Direct Talk mode, the two phones should

be a minimum of six feet apart to maximize

performance and improve transmission range. You can

only make Direct Talk calls to users located within your

range. This varies according to terrain, man-made

structures, and atmospheric conditions.

56 Section 2A. Making and Answering Calls

The following features are not available while in Direct

Talk mode:

䢇On-network phone calls.

䢇On-network Direct Connect, Group Connect,

Talkgroup calls, and Call Alerts.

䢇Data services.

䢇Sending and receiving messages.

䢇Call timer.

䢇Sending Call Alerts.

䢇Call forwarding.

Setting Your Phone to Direct Talk

Before you and another caller can use Direct Talk, both

of your phones must be set to Direct Talk mode.

1. Press

> Direct Talk.

2. Select Go To Direct Talk.

After a few seconds, your channel and code appear on

the display screen. Your phone displays the last

channel and code used for Direct Talk.

To return to network mode from Direct Talk:

1. Press

> DT Options.

2. Select Exit Direct Talk.

After a few seconds, your phone returns to network

service.

Code Direct Talk Calls

Your phone has 10 channels and 15 codes within each

channel. Channels represent the radio frequencies on

which you make and receive Nextel Direct Talk calls.

Codes allow you to minimize interference from others

using the same channel as you.

To make Direct Talk Code calls, both parties must be

on the same channel and code and have their phones

set to Direct Talk. Be aware that others using both your

same code and channel can hear your conversation.

And, you can hear their conversations as well.

To set a channel and code:

1. In Direct Talk mode, press Edit (left softkey).

2. Select Channel.

3. Select a channel.

Making Calls

Section 2A. Making and Answering Calls 57

4. Select Code.

5. Select a code.

6. Press Back (right softkey) to return to the Direct Talk

standby screen.

Making and Receiving Code Calls in Direct Talk

Mode

To make a Code call using Direct Talk:

䊳In Direct Talk mode, press and hold the Direct

Connect button. Your phone displays Transmitting,

along with the channel and code selected.

The tone emitted from your phone when making a

Direct Talk call is four beeps and sounds different from

the tone heard on Direct Connect calls conducted on

the network.

If you receive an error message, this means:

䢇There may be no parties on your channel or code.

䢇You are out of range.

When you receive a Code call using Direct Talk, your

phone displays Receiving, along with the channel and

code selected. Answer a Direct Talk Code call just like

you would any other Direct Connect call.

Private Direct Talk Calls

Private Direct Talk allows you to silence all the calls on

a channel that are not directed specifically at you. To

do this, you must first set your phone to Private Only.

To set your phone to Private Only:

1. In Direct Talk mode, press Edit (left softkey).

2. Select Code.

3. Select Pvt Only.

4. Press Back (right softkey) to return to the Direct Talk

standby screen.

To reach you, other Direct Talk callers must be on your

same channel and dial your ten-digit wireless phone

number to reach you.

58 Section 2A. Making and Answering Calls

Receiving a Private Direct Talk Call

The number or name of the person who initiated the

call appears on your display screen. Answer the call in

the same way you answer a regular Direct Connect

call.

A Private Direct Talk call ends a short time after the last

party releases the Direct Connect button. The display

screen returns to Direct Talk standby mode.

Making a Private Direct Talk Call

You can make Private Direct Talk calls to any person on

your same channel. You do not need to set your phone

to Private Only.

To make a private Direct Talk Call:

1. In Direct Talk mode, enter the ten-digit wireless

phone number of the person you want to call on

your channel. (You can also scroll to the number in

Contacts or Recent Calls list.)

2. Make the call in the same way you make a regular

Direct Connect call. The number or name of the

person you are calling appears on your display

screen.

If you receive an error message, it means:

䢇You may not be using a valid wireless phone

number.

䢇The person that you are trying to reach may not be in

Direct Talk mode.

䢇The person that you are trying to reach is set to a

different channel, or is out of range.

Receiving All Calls on a Channel

You can set your phone to receive all Direct Talk

transmissions that are within range and set to the same

channel. Do this by selecting Receive All, instead of a

code.

However, you cannot initiate a call when the code is set

to Receive All. If you press the Direct Connect button to

initiate a Direct Connect call and your code is set to

Receive All, you receive an error message.

Note You do not need to set your phone to Private Only to

receive Private calls. As long as you are on the same

channel as your caller, you can receive Private Direct

Talk calls.

Settings

Section 2B. Settings 61

䢇Clock — controls whether the time and date appear in

standby mode; sets time and date format; sets year.

䢇Menu View — controls whether the items on your main

menu and Java applications menu appear as large

icons or a list.

䢇Large Dialing — sets large digits to appear in standby

mode when you enter a number.

䢇Language — sets the language that your phone

displays.

Phone Calls Features

The Phone Calls menu controls how your phone

handles phone calls:

䢇Set Line — sets phone line 1 or phone line 2 as the

active line for outgoing calls. If you are not

provisioned for a second line and you set your line to

line 2, you will not be able to make or receive calls.

䢇Any Key Ans — lets you answer calls by pressing any

key on the keypad.

䢇Auto Redial — sets your phone to automatically redial

calls you make when the system is busy.

䢇Call Waiting — See “Call Waiting” on page 174.

䢇Auto Ans — sets your phone to automatically answer

an incoming call after a specified number of rings.

When this feature is on, the phone answers by

connecting you to the caller; it does not send the call

to voicemail, unless you are out of coverage or on

the line.

䢇Flip Activation — sets your phone to answer a call by

opening the phone or end a call by closing the

phone.

䢇Minute Beep — causes a beep to sound every minute

of an active call.

䢇Call Duration — causes the duration of a call to appear

on the display when the call ends.

䢇TTY — See “Telecommunications Relay Service” on

page 179.

䢇Hearing Aid — Supports the use of select Hearing Aid

devices. Set to Off, Microphone or Telecoil depending

on your Hearing Aid device. See “Using Your Phone

With a Hearing Aid Device” on page 193.

䢇Notifications — See “Message Notifications” on

page 151.

䢇DTMF Dialing — sets whether you can hear DTMF (dual

tone multi-frequency) tones with your keypad

64 Section 2B. Settings

Security Features

The Security menu lets you turn security features on and

off and change passwords:

䢇Phone Lock — turns on a feature that locks your

phone: Lock Now takes effect immediately; Auto Lock

takes effect when your phone is powered off and

then on. An unlock code is required to enable this

feature, to unlock the phone, and to set a new unlock

code. Contact Nextel Customer Service for your

default unlock code.

䢇Keypad Lock — locks the phone’s keypad, either

immediately or automatically after a set period of

inactivity.

䢇SIM PIN — enables and disables your phone’s SIM

PIN security feature. See “Turning SIM PIN On and

Off” on page 84.

䢇GPS PIN — enables and disables your phone’s GPS

PIN security feature. See “Setting the GPS PIN

Security Feature” on page 89.

䢇Change Passwds — changes your phone unlock code,

security code, SIM PIN, and GPS PIN.

Advanced Features

The Advanced menu contains advanced Settings

features.

䢇Alert Timeout — sets the amount of time a tone

continues to sound and the logo backlight continues

to flash when you receive a message notification,

Call Alert, or Datebook reminder.

䢇Headset/Spkr — sets headset options. See “Headset

Options” on page 75.

䢇Connectivity — Network ID sets the phone’s network IDs

and their roaming options under the direction of

Nextel Customer Service; Master Reset lets Nextel

Customer Service reset your service in the event of a

security or provisioning problem.

䢇Reset Defaults — Reset Settings returns all settings to

their original defaults; Reset All returns all settings to

their original defaults and erases all stored lists. Use

only under the direction of Nextel Customer Service.

䢇Return to Home — After Phone controls how long the

Recent Calls list displays after phone calls; After DC

controls how long the Recent Calls list displays after

Direct Connect calls.

Settings

Section 2B. Settings 65

䢇Transmitters — controls your phone’s radio

transmitters. Selecting Off prevents your phone from

making or receiving phone calls, Direct Connect

calls, Group Connect calls, or Talkgroup calls, or

transferring data.

䢇Baud Rate — sets the baud rate at which your phone

communicates with a laptop computer or similar

device.

Sound Settings

Ring Tones

Ringer types help you identify incoming calls and

messages. You can assign ringer types to individual

Contacts entries, types of calls, and types of messages.

Selecting Ringer Types

Your phone provides a variety of ringer options that

allow you to customize your ring and volume settings.

These options allow you to identify incoming calls by

the ring.

1. Press M > Ring Tones.

2. Scroll through the list of ring tones. A sample

ringer will sound as you highlight each option.

3. Press r or press Assign (left softkey).

4. Select the function(s) to which you want to assign

the current ringer by highlighting the option and

pressing r. (A check mark will appear next to

selected options).

䡲 Phone Line 1

䡲 Phone Line 2

䡲 Call Alert

䡲 Voice Mail

䡲 Messages

䡲 Net Alert

䡲 Direct Send Alert

䡲 Reminders

5. When you are finished, press Done (left softkey) to

assign the ringer to the selected function(s).

Settings

Section 2B. Settings 67

2. Make sure Vibrate All Off is set to .

3. Highlight any ring tone and press M >

Memory Usage.

Deleting custom ring tones frees memory.

Deleting Custom Ring Tones

Deleting a ring tone from the list of ring tones deletes it

from your phone.

Except for DRM ring tones, if you delete a ring tone that

you purchased from your phone, you will have to

purchase it again. Under certain conditions, some DRM

vendors will not charge you if you download an item

multiple times within a given time frame. Please contact

the DRM vendor to learn more about their download

regulations.

To delete a custom ring tone:

1. Press M > Ring Tones.

2. Make sure Vibrate All is set to Off.

Vibrate Settings

Vibrate All

The Vibrate All option allows you to be notified of calls

and messages with a vibration instead of an audible

alert.

To activate Vibrate All:

䊳With the phone open, press and hold the volume

button down in standby mode. (Pressing and

holding displays “VibeAll: On.” Continuing to hold

the button down displays “VibeAll: Locked.”

– or –

Press M > Ring Tones > Vibrate All. Set this option to

On or Locked.

Note Ring tones are stored in your phone using the same

memory space used to store messages, voice

records, pictures, and Java application data that are

stored in your phone’s memory. Deleting or moving

some of these other items frees memory for ring

tones.

Tip Setting this option to Locked requires you to press

and hold the volume control up to turn

Vibrate All off.

The Locked option helps prevent you from

accidentally turning Vibrate All off.

Settings

Section 2B. Settings 69

To deactivate Silence All:

䊳Press the volume key up repeatedly to select a

volume level.

To set your phone to vibrate instead of making a sound for

some features but not others:

1. Press M > Ring Tones.

2. Make sure Vibrate All is set to Off.

3. Select Vibrate from the list of ring tones.

4. Select the features you want to set to make no

sound.

5. When you are finished, press Done (left softkey).

Adjusting the Phone’s Volume Settings

Adjust your phone’s volume settings to suit your needs

and your environment.

1. Press M .> Settings > Volume

2. Select Line 1, , Line 2, Messages Earpiece, Speaker,

Keypad, Java Earpiece, Java Spkr or Data.

3. Using the navigation key, choose a volume level

and press r.

4. Scroll to the ring tone you want to delete and

press M > Delete.

5. Press Yes (left softkey) to confirm.

Minute Beep

Set your phone to alert you with an audible tone once

a minute during a voice call.

1. Press M > Settings > Phone Calls > Minute Beep.

2. Highlight On or Off and press r.

Note To set ring options for Direct Connect calls, Group

Connect calls, and Talkgroup calls, see “Vibrate

Settings” on page 67.

Tip You can adjust the ringer volume in standby mode

(or the earpiece volume during a call) by using the

volume key on the left side of your phone.

Settings

Section 2B. Settings 71

2. Select an option and press r.

䡲Icon View to view the main menu as a grid of

Icons. Icons animate when they are highlighted.

䡲List View to display the menu as a list.

Changing the Theme

Customize your phone’s display appearance by

selecting a theme to reflect your personality.

1. Press M > Settings > Display/Info > Theme.

2. Select an option and press r.

Changing the Clock Display

Select a format for the time and date display and

choose whether the time and date appear in standby

mode.

1. Press M > Settings > Display/Info > Clock.

2. Select Display, Time Format, or Date Format and then

press r.

3. Select an option and press r to apply the setting.

Changing the Text Size

Adjust the font when entering text (for example, when

using the notepad or when adding a Contacts entry).

1. Press M > Settings > Display/Info > Text Size.

2. Select Zoom, Standard, or Compressed and

press r.

Messaging Settings

Staying connected to your friends and family has never

been easier. With your phone’s advanced messaging

capabilities, you can send and receive many different

kinds of text messages without placing a voice call.

(For more information see “Multimedia Messages” on

page 154.)

Messaging settings make text messaging easier by

letting you decide how you would like to be notified of

new messages, create a signature with each sent

message, and create your own preset messages.

Note The year is set by the network, and even though it is

an option, it cannot be changed.

Settings

Section 2B. Settings 75

䡲Press Search (left softkey). Select Contacts, Recent

Calls, or Memo. Select the number you want to

enter.

3. Press r.

To set your phone to send a picture:

1. Press M > Settings > DC/GC Options >

One Touch DC.

2. Set this option to Send .Picture

To set your phone to send your phone’s information:

1. Press M > Settings > DC/GC Options >

One Touch DC.

2. Set this option to Send .My Info

To set your phone to send a contact:

1. Press M > Settings > DC/GC Options >

One Touch DC.

2. Set this option to Send .Contact

To turn off One Touch Direct Connect:

1. Press M > Settings > DC/GC Options >

One Touch DC.

2. Set this option to Off.

Headset Options

To set your phone to send incoming sound to a headset

only, or to a headset and a speaker at the same time:

1. Press M .> Settings > Advanced > Headset/Spkr

2. Select HdsetOnly to send incoming sound to the

headset only.

– or –

Select Hdset&Spkr to send incoming sound to the

headset and ring tones to the speaker.

Tip If you are entering a Talkgroup number, enter #

before the number.

Product specificaties

Merk:	Motorola
Categorie:	Mobiele telefoon
Model:	i776

Heb je hulp nodig?

Als je hulp nodig hebt met Motorola i776 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Mobiele telefoon Motorola

Motorola RAZR+ Handleiding

16 November 2023

Motorola MOTO VE440 Handleiding

26 Augustus 2023

Motorola Moto G Power 5G Handleiding

26 Augustus 2023

Motorola MOTO W259 Handleiding

26 Augustus 2023

Motorola Moto Q9m Handleiding

19 Juni 2023

Motorola V260 Handleiding

18 Juni 2023

Motorola Milestone A854 Handleiding

17 Juni 2023

Motorola Sidekick Slide Handleiding

17 Juni 2023

Motorola i412 Handleiding

16 Juni 2023

Motorola Hint QA30 Handleiding

16 Juni 2023

Handleiding Mobiele telefoon

Nieuwste handleidingen voor Mobiele telefoon

Samsung Galaxy Express Prime 3 Handleiding

25 Maart 2025

Samsung Evergreen Handleiding

25 Maart 2025

Primo 406 Handleiding

10 Maart 2025

Tiny Love My Natural Pals Handleiding

26 Februari 2025

Tiny Love Take-Along Handleiding

26 Februari 2025

Tiny Love Classic Developmental Handleiding

26 Februari 2025

Tiny Love Tiny Princess Handleiding

26 Februari 2025

Honor Magic 7 Pro 5G Handleiding

25 Februari 2025

Maxwest Neo Clam Handleiding

25 Februari 2025

Maxwest Neo M6 Handleiding

25 Februari 2025