Monitor Audio C165-T2 Handleiding

Monitor Audio Speaker C165-T2

Lees hieronder de 📖 handleiding in het Nederlandse voor Monitor Audio C165-T2 (10 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

INSTALLATION GUIDE

MANUALE DEL PRODOTTO E DI INSTALLAZIONE

GUIDE PRODUIT & INSTALLATION

PRODUKT- UND INSTALLATIONSHANDBUCH

GUÍA DE INSTALACIÓN Y DEL PRODUCTO

GUIA DO PRODUTO E INSTALAÇÃO

PRODUCT- EN INSTALLATIEHANDLEIDING

ῼ☖◡Ⳟ娚㑜⒬

インスタレーションガイド

РУКОВОДСТВО ПО УСТАНОВКЕ И ЭКСПЛУАТАЦИИ

 

 

INSTRUKCJA INSTALACJI

Custom Install

ENGLISH

Custom Install Series2

Optimum Speaker Positioning

5 or 7 Channel System Atmos

90°-90°

110°-110°

135°-135°

150°-150°

0°

30°-30°

22°

-22°

65°

100°

2 Atmos speakers (in line with front left and right)

30°

125°

150°

135°

45° 55°

4 Atmos Speakers (in line with front left and right)

Prior to Fitting the Custom Install Series Speakers

CAUTION: These Custom Install loudspeakers can only be

ﬁxed into plasterboard (dry-lined) or suspended ceilings/ walls

with a thickness of up to 45mm (1 3/4

”). Solid wall installation will

require channelling out and frame work constructed to provide a

structure for the Tri Grip dog legs to clamp to. For safety reasons, if you

are unsure of your ability to provide a secure and safe ﬁxing, do not

attempt to ﬁx these speakers, please obtain the services of a competent

and qualiﬁed trades person.

CAUTION: Ensure that there are no water pipes or electricity

cables running within the wall structure before cutting the

speaker apertures. Work from secure steps and avoid trailing

wires.

Painting the Grilles

NOTE: If choosing to paint the grille, we recommend you follow

these simple steps:

1. Remove the membrane scrim from the inside of the grille.

2. Paint all grilles required for the installation with the same batch of

paint (if they are to be the same colour). Spray paint is easier to

apply or use a stippling action when brushing to avoid blocking the

holes of the grille.

3. When dry, attach the spare membrane scrim (where supplied) into

the inside of the grille.

4. Fit the grille to the speaker (s).

Over Tightening Warning

ATTENTION INSTALLERS:

Do not over-tighten the Tri-Grip Dog Leg clamps. Over tightening the

clamping mechanism on any in ceiling/ in wall speaker can result in

damage to the speaker mounting hardware, ceiling/ wall or speaker

frame, and/ or deﬂection in the speaker frame during installation.

If you notice any of the above during installation, you have overtightened

the Tri Grip dog leg. Back off the mounting screw until deﬂection is

reduced to allow the product to sit ﬁrmly against the ceiling / wall.

Do not exceed 5Kgf/cm (4.34 lbf/inch.) or 0.5 NM when

tightening the Tri Grip dog leg screws.

When using a cordless screwdriver/ drill to install this product ensure the

clutch is set to it’s lowest setting to avoid over-tightening and damaging

the mounting hardware.

Speaker Controls

High Frequency Level Adjust

With the HF setting on the ‘0’ position, the speaker will give you a neutral

sound with no additional adjustments made. Switching to the ‘+db’

position will give the high frequencies a boost, giving you more clarity and

presence in the treble while switching to the ‘-db’ will do the opposite.

This position can be useful if you want more prominence in the bass

frequencies.

Mid Frequency Level Adjust

With the Mid setting on the ‘0’ position, the speaker will give you a neutral

sound with no additional adjustments made. Switching to the ‘+db’

position will give the Mid frequencies a boost, giving you warmer sound

with more presence in the vocal register while switching to the ‘-db’ will

do the opposite.

Boundary Compensation Switch

When a speaker is placed near a corner or wall it can sometimes make

the bass too ‘boomy’ as low frequencies reﬂect off the nearby surfaces.

If the bass is too ‘boomy’ for your liking then, like a port bung, the

Boundary Compensation switch can be used to dampen the bass being

produced by the speaker.

NOTE: As with all audio, the settings you chose to use are subject

to your own personal tastes and the affect your room has on the

acoustics. Experimentation is strongly advised to ﬁnd the best

setting for you.

Guarantee

Both the craftsmanship and the performance of this product is

guaranteed against manufacturing defects for a period of ﬁve years

for speakers from the date of purchase (see conditions in the Important

Safety Instructions booklet), provided that the product was supplied by an

authorised Monitor Audio retailer under the consumer sale agreement.

To help us ﬁnd your warranty details within our customer database,

should the need arise, please take a few minutes to register your

product(s) online at: monitoraudio.com.

ENGLISH

1Draw around template and mark centre lines if necessary

Template

Cut around marked line

Fitting the Custom Install Loudspeakers Images for illustration only

4Guide speaker into cut out

Fit grilles. They are held in place magnetically and should

‘snap’ into place.

5 6

Tighten Tri-Grip screws.

monitoraudio.com 3

c u t ou t t e m p l a t e

99mm

7/8

”)

Diameter: 170mm (6

11/16

”)

Connect speaker cables by pushing down on the

terminals and clamping the bare wire in the through hole.

See over tightening warning.

Product specificaties

Merk:	Monitor Audio
Categorie:	Speaker
Model:	C165-T2
Kleur van het product:	Zwart
Gewicht:	2080 g
Diepte:	120 mm
Bluetooth:	Nee
Connectiviteitstechnologie:	Bedraad
Diameter:	250 mm
Gemiddeld vermogen:	65 W
Aantal per verpakking:	1 stuk(s)
Aanbevolen gebruik:	Universeel
Impedantie:	12 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Plafond-montage
Aantal drivers:	1
Frequentiebereik:	60 - 25000 Hz
Gevoeligheid:	88.5 dB
Luidspreker soort:	2-weg
Versterker:	Extern
Diameter hogetonenluidspreker:	1 "
Aantal tweeter drivers:	2
Tweeter:	Ja
Aanbevolen versterkingskracht (max):	65 W
aanbevolen versterkingskracht (min):	20 W