Milwaukee M12 TrapSnake 2574-21 Handleiding

Milwaukee Niet gecategoriseerd M12 TrapSnake 2574-21

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M12 TrapSnake 2574-21 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/11
Cat. No. / No de cat.
2574 SERIES, 2576 SERIES, 14-50-2576, 49-16-2574, 49-16-2576
PORCELAIN AUGER SYSTEM
SYSTÈME À TARIÈRE EN PORCELAINE
SISTEMA DEL BARRENO DE PORCELANA
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifica-
tions provided with this power tool. Failure to follow
all instructions listed below may result in electric shock,
îš¿re and/or serious injury. Save all warnings and in-
structions for future reference. The term "power tool"
in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
modiîš¿ed plugs and matching outlets will reduce risk
of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the
inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your îš¿nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before turn-
ing the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in per-
sonal injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust col-
lection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazard-
ous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of îš¿re when used with
another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and îš¿re.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a îš¿re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, ush with water. If liquid con
tacts eyes, additionally seek medical help. Liqui
4
OPERATION
WARNING
Always remove battery pack before
changing or removing accessories.
Only use accessories speciîš¿cally recommended
for this tool. Others may be hazardous.
To reduce the risk of injury, wear safety goggles
or glasses with side shields. Always wear leather
gloves.
Operating the Trapsnakeâ„¢ Driver
Using the forward/reverse switch:
1. For (clockwise) rotation, push in the forward/forward
reverse switch from the right side of the tool â–º. Check
the direction of rotation before use.
2. For reverse (counterclockwise) rotation, push in the
forward/reverse switch from the left side of the tool
â—„. Check direction of rotation before use.
3. To lock the trigger, push the forward/reverse switch
to the center position. The trigger will not work while
the forward/reverse switch is in the center locked
position. Always lock the trigger or remove the bat-
tery pack before performing maintenance, changing
accessories, storing the tool and any time the tool is
not in use.
Starting, stopping and controlling speed:
The Trapsnakeâ„¢ driver may be used at any speed from
0 RPM to full speed.
1. To start the Trapsnakeâ„¢ driver, insert an M12â„¢
battery and pull the trigger.
2. To vary the driving speed, increase or decrease pres-
sure on the trigger. The further the trigger is pulled,
the greater the speed.
3. To stop the tool, release the trigger.
APPLICATIONS
WARNING
Always remove battery pack before
changing or removing accessories.
Only use accessories speciîš¿cally recommended
for this tool. Others may be hazardous.
To reduce the risk of injury, wear safety goggles
or glasses with side shields. Always wear leather
gloves.
Inserting Auger into Drain
1. Unclip the cable from the cable clip.
2. Pull the cable sleeve back so that only the cable tip
is visible at the boot.
3. Carefully insert the boot into the drain, tilting the
auger for easy entry.
WARNING! The boot must be in the drain to support
the cable from whipping. The cable can damage
porcelain.
4. If using the Trapsnakeâ„¢ driver, set the forward/
reverse switch to the forward position â–º. Pull the
trigger while pushing down on the driver to advance
the cable into the drain. If using the auger handle,
rotate the handle in a clockwise motion while pushing
down on the handle.
NOTE: If the cable is not advancing, set the forward/
reverse switch to the reverse position â—„, and continue
advancing the cable. Once the cable becomes unstuck,
set the forward/reverse switch back to the forward
position â–º.
5. If more cable is needed, release the second half of
the cable.
Releasing the Second Half of Cable
1. Pull up the cable sleeve to the red cable lock indicato
SYMBOLOGY
Volts
Direct Current
No-Load Revolutions per Minute (RPM)
C US
UL Listing Mark for
Canada and U.S.
Always wear leather gloves
SPECIFICATIONS
Cat. No. 49-16-2574 ....................................................
Description......................Trapsnakeâ„¢ 4' Urinal Auger
Applications Urinal .......................................................
Cable Type .............................................3/8" x 4' Bulb
Cat. No. 49-16-2576 ....................................................
Description....................... Trapsnakeâ„¢ 6' Toilet Auger
Applications Toilet ........................................................
Cable Type ............................. 1/2" x 6' Retriever Bulb
Cat. No. 14-50-2576 ....................................................
Description........................ M12â„¢ Trapsnakeâ„¢ Driver
Applications Toilet, Urinal, Floor Trap ...........................
Volts 12 DC ...................................................................
No Load RPM 0 - 500 ...................................................
Battery Type ..................................................... M12â„¢
Charger Type .................................................... M12â„¢
ASSEMBLY
WARNING
Recharge only with the charger
speciîš¿ed for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons and
pull the battery pack away from the Trapsnakeâ„¢ driver.
WARNING
Always remove battery pack before
changing or removing accessories.
To insert the battery, slide the pack into the body of
the Trapsnakeâ„¢ driver. Make sure it latches securely
into place.
Fuel Gauge
To determine the amount of charge left in the battery,
pull the Trapsnakeâ„¢ driver trigger. The fuel gauge
will light up for 2-3 seconds.
To signal the end of charge, 1 light on the fuel gauge
will ash for 2-3 seconds.
Installing the Auger Handle/
Trapsnakeâ„¢ Driver
Always remove the battery before inserting or remov-
ing the Trapsnakeâ„¢ driver.
1. To install the auger handle or Trapsnakeâ„¢ driver,
press the auger connection into the auger socket
until the auger collar snaps back and the auger
connection is locked into place.
2. To remove the auger handle or Trapsnakeâ„¢ driver,
pull out the auger collar, then pull out the auger
connection.

Product specificaties

Merk: Milwaukee
Categorie: Niet gecategoriseerd
Model: M12 TrapSnake 2574-21

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M12 TrapSnake 2574-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Milwaukee

Milwaukee

Milwaukee M12 FUEL 2559-21 Handleiding

2 December 2024
Milwaukee

Milwaukee L4 RLEPB Handleiding

19 November 2024
Milwaukee

Milwaukee M18 Fuel Angler 2873B-22 Handleiding

16 November 2024
Milwaukee

Milwaukee M18 Radius ONE-KEY 2150-20 Handleiding

25 Juni 2024
Milwaukee

Milwaukee MXF041 Handleiding

23 Juni 2024
Milwaukee

Milwaukee ROLL-ON 3300R Handleiding

23 Juni 2024
Milwaukee

Milwaukee MXF NRG Handleiding

10 Juni 2024
Milwaukee

Milwaukee TRB 1 Handleiding

10 Juni 2024
Milwaukee

Milwaukee M12 IR-201B Handleiding

10 Juni 2024
Milwaukee

Milwaukee L4 PPS Handleiding

10 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024
Profoto

Profoto RFi Softbox Octa Handleiding

24 December 2024
Koenic

Koenic KAP 2523 Handleiding

24 December 2024
Philips

Philips HD9921 Handleiding

24 December 2024
Philips

Philips Senseo HD7008 Handleiding

24 December 2024
Onkyo

Onkyo IRK1804C Handleiding

24 December 2024