Milwaukee M12 Fuel 0960-21 Handleiding

Milwaukee Stofzuiger M12 Fuel 0960-21

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M12 Fuel 0960-21 (11 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Cat. No. / No de cat.
0960-20
M12 FUELâ„¢ 1.6 GALLON WET/DRY VACUUM
ASPI RAT EUR DE D É TRIT U S SECS E T LI QUIDE S DE
6,1 L (1,6 GAL) M12 FUELâ„¢
ASPIRADORA PARA MATERIALES HÚMEDOS/SECOS DE
6,1 L (1,6 GALONES) M12 FUELâ„¢
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Vacuums have motors and other parts that can
produce sparks during normal use. Do not use
within 30 feet of areas where explosive materials
may be present (such as gasoline pumps and places
where liquids like paint thinners, cleaners, solvents,
etc. are stored).
• Do not use in the presence of explosive dust,
liquids or vapors.
• Do not use where oxygen or anesthetics are used.
• Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
• Use extra care when using on stairs.
ELECTRICAL SAFETY
• Do not handle battery pack or vacuum with wet
hands.
PERSONAL SAFETY
• STAY ALERT. Watch what you are doing and use
common sense. Do not use vacuum when you are
tired, distracted or under the inuence of drugs,
alcohol or medication causing diminished control.
• The operation of a vacuum can result in foreign
objects being blown into eyes, which can result
in eye damage. Always wear safety goggles or
glasses with side shields when operating vacuum.
• Wear a dust mask or use an OSHA compliant
vacuum solution when working in dusty situations.
Dust particles can harm your lungs.
• Avoid accidental starting. Ensure the switch is
in the o󰀨-position before inserting battery pack.
Inserting battery pack in vacuum that has the switch
on invites accidents.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
vacuum in unexpected situations.
• Keep hair, loose clothing, ngers, and all parts
of body away from openings and moving parts.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your îš¿nger on
the switch or energizing power tools that have the
switch on invites accidents.
VACUUM USE AND CARE
• Do not use without dust canister and/or lter in
place.
• Do not use to pick up ammable or combustible
liquids such as gasoline or use in areas where they
may be present.
• Do not pick up anything that is burning or smok-
ing such as cigarettes, matches, or hot ashes.
• Do not pick up soot, cement, plaster or drywall
dust without îš¿lter in place. These are very îš¿ne
particles that may a󰀨ect the performance of the
motor or be exhausted back into the air.
•This product is suitable for collection of silica
dust when used in accordance with these in-
structions. To reduce the risk of health hazards
from other vapors or dust, do not vacuum
carcinogenic, toxic or hazardous materials
such as asbestos, arsenic, barium, beryllium, lead,
pesticides or other health endangered materials.
• Use special care when emptying heavily loaded
tanks.
• To avoid spontaneous combustion, empty dust
box after each use.
• Do not leave vacuum unattended when battery
pack is installed. Remove battery pack when not
in use and before servicing.
• Disconnect the battery pack from the appliance
before making any adjustments, changing ac-
cessories, or storing appliance. Such preventive
safety measures reduce the risk of starting the ap-
pliance accidentally.
• Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything else that may reduce air ow.
• Maintain vacuum. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may a󰀨ect the vacuum's
operation. If damaged, have the vacuum repaired
before use. Many accidents are caused by poorly
maintained tools.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of îš¿re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and îš¿re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a îš¿re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modiîš¿ed. Damaged or modiîš¿ed batteries
may exhibit unpredictable behavior resulting in îš¿re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re o
excessive temperature. Exposure to îš¿re or tem
IMPORTANT SAFETY INSTRUCTIONS
WARNING
WHEN USING AN ELECTRICAL VACUUM, BASIC
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, IN-
CLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING
VACUUM. BEFORE USING THE VACUUM, READ THIS OPERATOR’S MAN-
UAL, BATTERY PACK AND CHARGER OPERATOR’S MANUALS, AND ALL
LABELS ON THE VACUUM, BATTERY PACK, AND CHARGER. FAILURE TO
FOLLOW THE WARNINGS AND INSTRUCTIONS MAY RESULT IN ELEC-
TRIC SHOCK, FIRE AND/OR SERIOUS INJURY.
4
ASSEMBLY
WARNING
To reduce the risk of
injury, always remove
the battery pack before removing the tank.
CAUTION
Keep lter clean. E󰀩ciency
of the vacuum is largely
dependent on the îš¿lter. A dirty îš¿lter will reduce
the air ow and overall e󰀩ciency of the system.
Remove from tank and tap clean.
WARNING
Recharge only with the
charger specified for
the battery. For speciîš¿c charging instructions,
read the operator’s manual supplied with your
charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove battery
pack before changing
or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
Removing/Installing the Filter
Use the îš¿lter for dry pickup only.
1. Remove the battery pack. Close and latch the
battery compartment.
2. Release the tank latches and lift o󰀨 the motor
housing. Place it upside down on a at surface.
3. To remove the îš¿lter, turn it 1/2" counter clockwise
and pull it o󰀨 of the motor housing/oat cage.
4. Empty all debris from the tank.
NOTE: When applicable, adhere to jobsite guide-
lines pertaining to the disposal of silica dust.
5. To install the lter, slide it over the oat cage. Line
up the îš¿lter tabs with the motor housing notches
and turn it 1/2" clockwise to lock in place.
6. Replace the motor housing and secure both
latches.
Pick-Up/Blower
The vacuum can be used for debris pick-up or as a
blower, depending on the port used.
1. For the debris , insert the large end of the pick-up
hose into the intake port of the motor housing,
lining up the tabs on the hose with the notches in
the port. Twist to secure and form a tight îš¿t.
2. To use as a , insert the large end of hose blower
into the blower port of the motor housing, lining
up the tabs on the hose with the notches in the
port. Twist to secure and form a tight îš¿t.
WARNING
Only use accessories
spec ific al ly rec om-
mended for this tool. Others may be hazardous.
Installing/Removing the Accessories
To install the nozzles, hoses or extensions, push
the accessory onto the vacuum inlet.
OPERATION
FUNCTIONAL
DESCRIPTION
1 1
2
3
4
5
6
7
7
8
9
10
11
1. Battery compartment
latches
2. Motor housing
3. Tank
4. Tank latches (front and
back)
5. Vacuum inlet
6. Blower port
7. Accessory storage
areas
8. Intake port
9. Battery bay
10. Switch
11. Fuel gauge


Product specificaties

Merk: Milwaukee
Categorie: Stofzuiger
Model: M12 Fuel 0960-21

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M12 Fuel 0960-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stofzuiger Milwaukee

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger