Milwaukee 2567-20 Handleiding

Milwaukee Schroefmachine 2567-20

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 2567-20 (12 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Cat. No. / No de cat.

2566-20, 2567-20

M12 FUEL™ 1/4" AND 3/8" HIGH SPEED RATCHETS

CLIQUET À HAUTE VITESSE DE 1/4" ET 3/8" FUEL™ M12

TRINQUETE DE ALTA VELOCIDAD DE 1/4" Y 3/8" FUEL™ M12

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specica-

tions provided with this power tool. Failure to

follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all

warnings and instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs

and matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

• Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk

of electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply. Use of an GFCI reduces

the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

• Use personal protective equipment. Always wear eye

protection. Protective equipment such as a dust mask,

non-skid safety shoes, hard hat or hearing protection used

for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energizing power tools that have the switch

on invites accidents.

• Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn

it on and o󰀨. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

• Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may a󰀨ect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations di󰀨erent

from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make

a connection from one terminal to another. Shorting

the battery terminals together may cause burns or a re.

• Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or

modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or

risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or temperature

above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging im-

properly or at temperatures outside the specied range

may damage the battery and increase the risk of re.

SERVICE

• Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

RATCHETS

• Hold the power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

“live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

SPECIFICATIONS

Volts 12 DC..............................................................

Battery Type .................................................M12™

Charger Type M12™ ................................................

Cat. No. 2566-20 .....................................................

RPM ............................................................. 0 - 450

Torque Range ........................................0 - 35 ft-lbs

Square Drive Anvil ............................................ 1/4"

Cat. No. 2567-20 .....................................................

RPM ............................................................. 0 - 450

Torque Range ........................................0 - 35 ft-lbs

Square Drive Anvil ............................................ 3/8"

Recommended Ambient

Operating Temperature ......................0°F to 125°F

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

Lock Switch

Read Operator's Manual

C US

UL Listing for Canada and U.S.

FUNCTIONAL DESCRIPTION

1. 1/4" square drive anvil

2. Forward/reverse toggle

3. Fuel gauge

4. Handle

5. 3/8" square drive anvil

6. Paddle switch

7. Lock switch

8. LED

Cat. No. 2566-20

876Cat. No. 2567-20

ASSEMBLY

WARNING

Recharge only with the charger

specied for the battery. For spe-

cic charging instructions, read the operator’s

manual supplied with your charger and battery.

Removing/Inserting the Battery

To remove the battery, push in the release buttons

and pull the battery pack away from the tool.

WARNING

Always lock the trigger or remove

the battery pack any time the tool

is not in use.

To insert the battery, slide the pack into the body

of the tool. Make sure it latches securely into place.

WARNING

Only use accessories specically

recommended for this tool. Others

may be hazardous.

Use only sockets and other accessories spe-

cically designed for use on impact tools. Other

sockets and accessories might shatter or break

causing injury.

Attaching and Removing Accessories

These tools are intended only for use with accesso-

ries designed for impact tools. Other sockets could

shatter or break, causing injury.

1. Use only appropriate Square Drive Sockets.

2. To attach a socket or other accessory, align the

accessory with the drive anvil and push it rmly

onto the tool.

3. To remove the accessory, pull the accessory o󰀨

the drive anvil.

Product specificaties

Merk:	Milwaukee
Categorie:	Schroefmachine
Model:	2567-20

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 2567-20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Schroefmachine Milwaukee

Milwaukee M12 FCIWP12G3 Handleiding

20 November 2024

Milwaukee M12 BDD Handleiding

16 November 2024

Milwaukee M18 BDD Handleiding

16 November 2024

Milwaukee M18 ONEFMTIW2FC12 Handleiding

4 September 2024

Milwaukee M18 FUEL 2953-20 Handleiding

23 Juni 2024

Milwaukee M18 FUEL FSGC Handleiding

10 Juni 2024

Milwaukee M18 ONEFHIWF12 Handleiding

5 Mei 2024

Milwaukee M18 FUEL FMTIW2F38 Handleiding

10 April 2024

Milwaukee M12 FID2 Handleiding

10 April 2024

Milwaukee M12 FUEL FRAIWF12 Handleiding

10 April 2024

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine

Gude MS 4.0-150-17 4in1 Akku-Schrauber inkl. Koffer + Akku 1.5Ah + Zub Handleiding

16 December 2024

Total TCKLI2006 Handleiding

16 December 2024

Total TAT40122 Handleiding

16 December 2024

Total TAT40342 Handleiding

16 December 2024

Hilti SID 2‑A12 Handleiding

9 December 2024

Black Decker 2038 Handleiding

8 December 2024

Silverline 248250 Handleiding

5 December 2024

Bavaria BSD 3,6/1 Li Handleiding

5 December 2024

Hilti HRD-H Handleiding

5 December 2024

Einhell RT-SD 4,8 Handleiding

4 December 2024