Milwaukee 2455-20 Handleiding

Milwaukee Schroefmachine 2455-20

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 2455-20 (11 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S

MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN

COMPRENDRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL

MANUAL DEL OPERADOR.

Cat. No.

No de cat.

2455-20

M12™ CORDLESS NO-HUB COUPLING DRILL DRIVER

PERCEUSE/TOURNEVIS À ACCOUPLEMENT SANS MOYEU M12™

TALADRO-DESTORNILLADOR SIN CUBO DE ACOPLAMIENTO DE M12™

2 3

• Hold power tool by insulated gripping sur-

faces, when performing an operation where the

fastener may contact hidden wiring. Fasteners

contacting a “live” wire may make exposed metal

parts of the power tool “live” and could give the

operator an electric shock.

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Keep hands away from all cutting edges and

moving parts.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

• WARNING: Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to cause

cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and

other masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well venti-

lated area, and work with approved safety equip-

ment, such as those dust masks that are specially

designed to ﬁ lter out microscopic particles.

Cat. No.

Volts

DC No Load RPM

Capacities

Drilling

Wood

Banding

Torque

2455-20 12 0-250 Banding

0-750 Drilling 1/2" 60 in.lbs.

80 in.lbs.

SPECIFICATIONS

FUNCTIONAL DESCRIPTION

PERSONAL SAFETY

GENERAL POWER TOOL SAFETY WARNINGS

WORK AREA SAFETY

ELECTRICAL SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive at-

mospheres, such as in the presence of ﬂ am-

mable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

• Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

• Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁ ed plugs and matching outlets will

reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase

the risk of electric shock.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk

of electric shock.

• If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

• If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.

Failure to follow the warnings and instructions may result in electric shock, ﬁ re and/or

serious injury. Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the switch does not

turn it on and o. Any power tool that cannot be

controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

• Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits

etc., in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations dierent from those intended could

result in a hazardous situation.

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inﬂ uence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

• Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your ﬁ nger on the switch or energising power tools

that have the switch on invites accidents.

• Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

• Recharge only with the charger speciﬁ ed by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of ﬁ re

when used with another battery pack.

• Use power tools only with speciﬁ cally desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and ﬁ re.

BATTERY TOOL USE AND CARE

SPECIFIC SAFETY RULES

• When battery pack is not in use, keep it away

from other metal objects like paper clips,

coins, keys, nails, screws, or other small metal

objects that can make a connection from one

terminal to another. Shorting the battery termi-

nals together may cause burns or a ﬁ re.

• Under abusive conditions, liquid may be eject-

ed from the battery; avoid contact. If contact

accidentally occurs, ﬂ ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

SERVICE

• Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per

Minute (RPM)

Underwriters Laboratories, Inc.

United States and Canada

1. Bit holder collar

2. Mode selector collar

3. Torque LED

4. Fuel gauge

5. Control switch

6. Trigger

7. Worklight LED

4 5

Recalibration:

To maintain high-precision torque, the tool will oc-

casionally need to be recalibrated. To signify that

the tool may be out of an acceptable tolerance

torque range, theTorque LED will ﬂ ash after the

trigger is released. The tool can continue to be used

for jobs not requiring accurate torque, but should

be returned to a MILWAUKEE service facility for

recalibration before using for precision torque work.

Please send the M12™ No–Hub Coupling Drill

Driver needing service of the torque mechanism

(or if tool has reached its 25,000 cycles) to:

Milwaukee Electric Tool Corporation

13135 West Lisbon Road

Brookﬁ eld, Wisconsin 53005

Attention: After–Sales Service

to calibrate the M12™ No–Hub Coupling Drill Driver

to manufacturer’s speciﬁ cation of 60/80 in–lbs,

using calibrated test equipment traceable to the

National Institute of Standards and Technology

Standards. Product will be returned with manu-

facturer’s statement of calibration. There is an ad-

ditional charge to obtain a separate NIST - National

Institute of Standards and Technology Standards

“Certiﬁ cate of Calibration”.

Using the Control Switch

The control switch may be set to

three positions: forward, reverse

and lock. Due to a lockout mecha-

nism, the control switch can only be

adjusted when the ON/OFF switch

is not pressed. Always allow the

motor to come to a complete stop

before using the control switch.

For forward (clockwise) rotation,

push in the control switch from the

right side of the tool. Check the

direction of rotation before use.

For (counterclockwise) reverse

rotation, push in the control switch

from the left side of the tool. Check

direction of rotation before use.

To lock the trigger, push the con-

trol switch to the center position.

The trigger will not work while

the control switch is in the center

locked position. Always lock the

trigger or remove the battery pack

before performing maintenance,

changing accessories, storing the tool and any time

the tool is not in use.

Battery Pack Protection

To protect the battery from damage and extend

its life, the tool’s intelligent circuit monitors current

draw, temperature, and voltage drops.

In extremely high torque, binding, stalling, and short

circuit situations that cause high current draw, the

fuel gauge will ﬂ ash, and the tool will turn OFF. To

reset, release the trigger.

Under extreme circumstances, the internal tem-

perature of the battery could become too high.

If this happens, the fuel gauge will ﬂ ash and the

battery pack will shut o. Let the battery pack cool

and then continue work.

APPLICATIONS

WARNING To reduce the risk of elec-

tric shock, check work area for hidden pipes

and wires before drilling or driving screws.

Forward -

Push from RIGHT

Lock -

Push to CENTER

Reverse -

Push from LEFT

This tool provides a quick, convenient means of drill-

ing small holes and installing and removing bands.

Drilling in Wood, Composition Materials and

Plastic

Always use sharp bits. When using twist drill bits,

pull the bit out of the hole frequently to clear chips

from the bit ﬂ utes. To reduce the chance of splinter-

ing, back work with a piece of scrap wood.

During binding or high torque drilling applications,

the tool may shut down. To reset, release the trigger.

Tightening/Removing Bands

Adjust the clutch to the proper setting as indicated

by the band manufacterer. Place the proper size

socket into the tool. Fit the socket over the band fas-

tener and pull the trigger. When the proper torque

is reqched, the clutch will slip, the tool will stop,

and the torque LED will light. Release the trigger.

When removing bands, it may be necessary to

slightly loosen the band fastener by hand before

using the tool's reverse. Fit the socket over the band

fastener. Manually rotate the tool counterclockwise

to release the torque on the fastener. Put the tool into

reverse and pull the trigger fo fully release the band.

Maintaining Tool

Keep your tool, battery pack and charger in good

repair by adopting a regular maintenance program.

After six months to one year, depending on use,

return the tool, battery pack and charger to A

MILWAUKEE service facility for:

• Lubrication

• Mechanical inspection and cleaning (gears, spin-

dles, bearings, housing, etc.)

• Electrical inspection (battery pack, charger, motor)

• Testing to assure proper mechanical and electrical

operation

If the tool does not start or operate at full power

with a fully charged battery pack, clean the contacts

on the battery pack. If the tool still does not work

properly, return the tool, charger and battery pack,

to a MILWAUKEE service facility for repairs.

MAINTENANCE

WARNING To reduce the risk of per-

sonal injury and damage, never immerse your

tool, battery pack or charger in liquid or allow

a liquid to ﬂ ow inside them.

WARNING To reduce the risk of injury,

always unplug the charger and remove the

battery pack from the charger or tool before

performing any maintenance. Never disas-

semble the tool, battery pack or charger.

Contact a MILWAUKEE service facility for

ALL repairs.

WARNING Recharge only with the

charger speciﬁ ed for the battery. For speciﬁ c

charging instructions, read the operator’s

manual supplied with your charger and battery.

Inserting/Removing the Battery

To remove the battery, push in the release buttons

and pull the battery pack away from the tool.

To insert the battery, slide the pack into the body of

the tool. Make sure it latches securely into place.

OPERATION

WARNING Always remove battery

pack before changing or removing accesso-

ries. Only use accessories speciﬁ cally recom-

mended for this tool. Others may be hazardous.

WARNING To reduce the risk of injury,

wear safety goggles or glasses with side shields.

Fuel Gauge

To determine the amount of charge left in the bat-

tery, pull the trigger. The Fuel Gauge will light up for

2-3 seconds. To signal the end of charge, 1 light on

the fuel gauge will ﬂ ash for 2-3 seconds.

Installing Bits and Sockets

Always remove the battery before inserting or

removing accessories. Select the proper style and

size accessories for the job. This driver is intended

for use with drill and driver bits with a 1/4" hex shank

and ball detent recess.

1. To install the accessory, pull out the collar and

insert the accessory. Release the collar.

2. To remove the accessory, pull out the collar and

remove the accessory.

Setting the Mode

The mode selector collar can be

set to 60 in. lbs, 80 in. lbs, or Drill.

When properly adjusted, the clutch

will slip at the set torque to prevent

over-tightening and possibly damag-

ing the bands.

To tighten bands, turn the mode

selector collar so the arrow lines up

with either 60 or 80, as indicated by

the band manufacterer.

To drill, turn the mode selector collar

so the arrow lines up with .

Torque LED

When the speciﬁ ed torque is reached

(60/80 in.lbs), the Torque LED on the

back of the tool will light.

Tightening

Drilling

ASSEMBLY

ACCESSORIES

For a complete listing of accessories refer to your

MILWAUKEE Electric Tool catalog or go online

to www.milwaukeetool.com. To obtain a catalog,

contact your local distributor or service center.

WARNING Always remove battery pack

before changing or removing accessories.

Only use accessories speciﬁ cally recommend-

ed for this tool. Others may be hazardous.

Cleaning

Clean dust and debris from charger and tool vents.

Keep tool handles clean, dry and free of oil or

grease. Use only mild soap and a damp cloth to

clean the tool, battery pack and charger since certain

cleaning agents and solvents are harmful to plastics

and other insulated parts. Some of these include

gasoline, turpentine, lacquer thinner, paint thinner,

chlorinated cleaning solvents, ammonia and house-

hold detergents containing ammonia. Never use

ﬂ ammable or combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and

charger to the nearest service center.

Product specificaties

Merk:	Milwaukee
Categorie:	Schroefmachine
Model:	2455-20

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 2455-20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Schroefmachine Milwaukee

Milwaukee M12 FCIWP12G3 Handleiding

20 November 2024

Milwaukee M12 BDD Handleiding

16 November 2024

Milwaukee M18 BDD Handleiding

16 November 2024

Milwaukee M18 ONEFMTIW2FC12 Handleiding

4 September 2024

Milwaukee M18 FUEL 2953-20 Handleiding

23 Juni 2024

Milwaukee M18 FUEL FSGC Handleiding

10 Juni 2024

Milwaukee M18 ONEFHIWF12 Handleiding

5 Mei 2024

Milwaukee M18 FUEL FMTIW2F38 Handleiding

10 April 2024

Milwaukee M12 FID2 Handleiding

10 April 2024

Milwaukee M12 FUEL FRAIWF12 Handleiding

10 April 2024

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine

Bosch GDR 1440-LI Professional Handleiding

23 November 2024

Makita DDA350Y1J Handleiding

23 November 2024

Makita DDF446RTJ Handleiding

23 November 2024

Makita DDF448Y1J Handleiding

23 November 2024

Proviel HTBS 710 Handleiding

19 November 2024

Prowork PSD 4,8 Handleiding

19 November 2024

Bavaria By Einhell BAS 4,8 L Handleiding

19 November 2024

Alpha Tools AS 12 A Handleiding

17 November 2024

Netter Vibration PKL 740 Handleiding

17 November 2024

Hazet 9022 P-2 Handleiding

15 November 2024