Mill MB1200DN Handleiding

Mill Heater MB1200DN

Lees hieronder de 📖 handleiding in het Nederlandse voor Mill MB1200DN (15 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

ASSEMBLY AND INSTRUCTION MANUAL (EN)

Please read the instrucons carefully before use. Take good care of this manual for later use.

This assembly and instrucon manual applies to the following panel heaters:

IB300, IB600DN, IB900DN, IB1200DN, IB800L DN, IB1000L DN

IB600DN G, IB1200DN G, IB800L DN G

MB300, MB600DN, MB900DN, MB1200DN, MB800L DN, MB1000L DN

PH600DN, PH1000DN, PH600L DN, PH800L DN

PH600DN S, PH1000DN S, PH600L DN S, PH800L DN S

PH600DN G, PH1000DN G, PH600L DN G, PH800L DN G

Series: Steel & Glass

Contents

Important safety informaon .................................................................................................... 3

Descripon of the heater ........................................................................................................... 6

Assembly .................................................................................................................................... 7

Electronic thermostat — Instrucons….……………...................................………………………………………………8

Day/night thermostat – Instrucons ....................................................................................... 10

Maintenance ............................................................................................................................ 15

Warranty .................................................................................................................................. 15

Waste disposal ......................................................................................................................... 15

EN 2 millheat.com

Important safety informaon

You must obey common safety guidelines when using electrical products, especially in the presence of children.

WARNING! To avoid electric shock or damage due to the heat, always make sure the plug is pulled out before the heater is moved or

cleaned.

Read the instrucons carefully.

The product is intended for home use only.

Make sure the heater is connected to the house's regular mains (230 V), as it indicated on the heater.

New heaters will produce a specic odor when used the rst me. This will stop aer a short me and is completely

harmless.

Check for any pieces of packing foam or cardboard that may have fallen into the heang elements of the heater. These

pieces must be removed in order to avoid unpleasant odors.

Prevent the heater from overheang – do not cover.

Always turn o the heater and unplug it when not used for a long me.

Pay special aenon if the heater is used in rooms where children, the handicapped or elderly reside.

The heater should not be set up directly beneath an electrical socket outlet.

The cord must not be laid under any kind of carpet. Make sure the cord is laid in such a way that nobody can trip on it.

The heater must not be used if either the cord or plug is damaged. The heater must not be used if it has been dropped on

the oor or is damaged in any other way causing it to malfuncon.

The cord must be repaired by the manufacturer or by an expert if it has been damaged, to avoid dangerous situaons.

Avoid using extension cords, which may overheat and could possibly start a re.

Never cover the air vents on the heater. Avoid potenal re hazards by making sure the air intakes are not blocked or

covered. The heater should be used in rooms with normal at oors.

The heater should not be installed in close proximity to ammable materials of any kind because there can always be a risk

of re.

The heater must never be used in rooms where gasoline, paint or other ammable liquids are stored, such as in a garage.

The heater is approved for use in zone 2 in bathrooms.

Never touch an electric heater with wet hands. The heater should be installed so a person showering or taking a bath

cannot come into direct contact with it.

The heater becomes hot when it is on. Therefore, be careful and avoid burning or scorching your skin.

The heater must be switched o, the plug removed and the heater must cool down before it is moved.

Avoid overloading the mains (the circuit) where the heater is connected. The heater may overload the electrical circuit if

other electrical devices are plugged into the same socket outlet.

EN 3 millheat.com

Product specificaties

Merk:	Mill
Categorie:	Heater
Model:	MB1200DN
Kleur van het product:	Wit
Ingebouwd display:	Nee
Breedte:	1065 mm
Diepte:	78 mm
Hoogte:	400 mm
Soort:	Olievrije radiator
Materiaal behuizing:	Staal
Vermogen:	1200 W
Geschikt voor:	Binnen
Wifi:	Ja
Verwarmingsvermogen:	- W
Plaatsingsopties:	Muur
Verwarmingselement type:	Aluminium