Miele WXI860 WCS Handleiding

Miele Wasmachine WXI860 WCS

Lees hieronder de 📖 handleiding in het Nederlandse voor Miele WXI860 WCS (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

 fold here  fold here  fold here  fold here  fold here  fold here

OPERATION

PREPARING THE LAUNDRY/SELECTING A PROGRAM

ADDING LAUNDRY

Damage from incorrect installation

and connection.

Installing and connecting the washing ma-

chine incorrectly will cause serious dam-

age to property.

See “Installation”.

Damage resulting from failure to re-

move the shipping struts.

Failure to remove the shipping struts can

result in damage to the washing machine

and to adjacent cabinetry or appliances.

Remove the shipping struts as described

in “Installation and connection”.

Switching on the washing machine

Turn the program selector to the Normal

program.

The welcome tone will sound and the wel-

come screen will light up.

The display will now guide you through the

initial commissioning process, which is di-

vided into 5steps.

For additional information, please refer to

the separate operating instructions sup-

plied.













    

    

Operating the sensor buttons

The sensor buttons react to fingertip con-

tact. If a sensor button is illuminated, it can

be selected.

If a sensor button is brightly lit, this means:

currently selected

If a sensor button is dimly lit, this means:

selection possible

aControl field

The control field consists of a display

and various sensor buttons.

bDisplay

Various values are displayed and/or se-

lected on the display.

c sensor buttons

The values in the display can be

changed with the sensor buttons.

dOKsensor button

Confirm the selected values with the

OKsensor button.

eTwinDos sensor button with the ad-

ditional Whites and Colors sensor

buttons

Deactivate or activate automatic deter-

gent dispensing via the TwinDos sensor

button.

fOptical interface

This is used by the Service department

as a transmission point.

gSensor buttons for options

You can supplement the wash pro-

grams with options.

h sensor button

You can view information about the en-

ergy and water consumption of your

washing machine with the sensor

button.

i sensor button

The sensor button starts the Delay

Start function.

jsensor button

You can specify the degree of soiling of

the load in 3settings. This sensor but-

ton is only active when the TwinDos op-

tion is activated.

kStart Add laundry/ sensor button

Touching the /Start Add laun-

drysensor button starts the se-

lected program. The sensor but-

ton lights up constantly.

Once the program has been

started, the /Start Add laun-

drysensor button allows you to

add laundry.

lsensor button

Activates CapDosing via the detergent

drawer.

mProgram selector

For selecting programs and for switch-

ing the machine off. The washing ma-

chine is switched on when you select a

program, and switched off by turning

the program selector to the position.

Environmentally friendly washing

- Make use of the maximum load that the

wash program can accommodate. This

will keep energy and water consumption

to a minimum in relation to the size of the

load.

- Use the program for small, lightlyExpress

soiled loads.

- Modern detergents make it possible to

wash at lower temperatures (e.g.,

70°F/20°C). Using the corresponding

temperature settings will save energy.

- Washing at low temperatures and/or us-

ing liquid detergents can cause bacteria

and odors to build up in the washing ma-

chine. Miele therefore recommends

cleaning the washing machine once ev-

ery month.

The washing machine provides you with

a reminder with the message Sanitize

info: Run the “Sanitize” or “Clean Ma-

chine” program in the display.

1. Preparing the laundry

Empty all pockets.

Damage due to foreign ob-

jects.

Nails, coins, paper clips, and so on

can cause damage to garments

and components in the machine.

Check the laundry before wash-

ing and remove any such foreign

objects.

Sort the laundry by color and by care label. Most gar-

ments have a textile care label in the collar or side

seam.

Pre-treat stains and badly soiled areas.

2. Selecting a program

There are three possible ways to select a program.

1. Selecting the standard programs with the program

selector dial

Turn the program selector to the required program. The

selected program will be shown in the display. This will

then be replaced by the standard display.

2. Selecting additional programs by setting the

program selector to “Additional programs/ ” and

using the display

Turn the program selector to the /Additional programs

position. The following appears in the display:Out-

door

Touch the sensor buttons until the program you

want appears in the display.

Confirm the program with the OK sensor button.

3. Selecting additional programs by setting the

program selector to MobileStart and using the

Miele app

Turn the program selector to the  posi-MobileStart 

tion.

The following appears in the display:

Load laundry, close the door and press “Start”. Appliance

can be remotely controlled

Follow the instructions in the display and start the pro-

gram.

The following appears in the display:

MobileStart 

The washing machine can now be operated with the Miele

app.

3 5

1 2

1Detergent drawer

2Control panel

3Drain filter

4Door

5TwinDos dispensing

3. Loading the washing machine

Opening the door

Take hold of the door and pull it

open.

Unfold the laundry and load

loosely into the drum.

Closing the door

Make sure that no items are

caught between the door and

the seal.

Shut the door gently.

4. Selecting program settings

Selecting a temperature/spin speed

Touch the sensor buttons above or below the tem-

perature or spin speed value in the display until the tem-

perature/spin speed you want appears in the display.

Selecting options

There are 2 ways of selecting options.

1. Directly via the sensor buttons

Touch the sensor button for the required option. It will

then light up brightly.

2. Via the Options sensor button and the display

Touch the Options sensor button. The following ap-

pears in the display: No Options

Touch the sensor buttons until the option you want

appears in the display and confirm this with the OK sen-

sor button.

Degree of soiling

The sensor button is only active when

the TwinDossensor button is activated.

- Light

No visible soiling or stains

- Normal

Visibly soiled and/or just a few slight

stains

- Heavy

Heavily soiled and/or stains clearly visible

 Delay Start/SmartStart

Delay Start

With the Delay Start function, you can delay

the start of the program. The start of the

program can be delayed from 15minutes

up to a maximum of 24hours.

SmartStart

The SmartStart function lets you define a

time period during which your washing ma-

chine will start automatically. The washing

machine is started via a signal, e.g., from

your energy supplier, that indicates that the

electricity rate is particularly economical.

5. Add detergent

There are several options for adding deter-

gent to the washing machine.

TwinDos

TwinDos dispensing is automatically acti-

vated for all programs in which dispensing

is possible.

Changing TwinDos dispensing

You can change the suggested color com-

position of the laundry.

Touch the or sensor but-Whites Colors

ton.

Deactivating TwinDos dispensing

Touch the TwinDossensor button. The

sensor button is only dimly lit and dis-

pensing is deactivated.

Filling with detergent

This washing machine requires particularly

efficient detergent. Add detergent in accor-

dance with the value in the pull-down

dosage display.

Ensure that TwinDos dispensing is deacti-

vated.

Pull out the deter-

gent drawer and

add detergent to

the compart-

ments.





Chlorine bleach for removing

stains or liquid detergent for the

pre-wash

Detergent for the main wash,

including Soak if selected





Fabric softener, liquid starch, or

caps

CapDosing

If you selected CapDosing when setting the

program, detergent will be dispensed via

the capsule for this wash program.

Using powder detergent

The detergent drawer contains an insert for

liquid detergent in the compartment.

This insert must be removed to use powder

detergent. It is not possible to use powder

detergent in the compartment.

Using chlorine bleach

Damage due to chlorine bleach.

Textiles may be discolored or their fibers

damaged.

Only use chlorine bleach on suitable tex-

tiles.

Chlorination must be activated in the set-

tings before chlorine bleach is first used.

The option must not be se-Pre-wash

lected.

Pour of bleachmax. 1/4 cup (60ml)

into the chamber.

The chlorine bleach is added automatically

10minutes before the end of the main

wash.

6. Start the program

Touch the flashing /Start Add laundry

sensor button.

The door will lock and the wash program

will start.

The program status will appear in the dis-

play.

Adding laundry during a program

sequence

Laundry can be added or removed at any

time, provided that the symbol is not illu-

minated in the display.

Touch the / sensor but-Start Add laundry

ton.

The following appears in the display:

Please wait

Wait until the following display lights up:

Door can be opened

Open the door and add or remove laun-

dry.

Close the door.

Touch the / sensor but-Start Add laundry

ton.

The wash program will continue.

7. Program end

The door is locked in the Anti-crease

phase. The display alternates between:

End/Anti-Crease Press Start button and 

Unlock the door either by touching the

Start Add laundry/ sensor button or by

turning the program selector to the

position.

The door will unlock.

Tip: After the Anti-crease phase, the door

will unlock automatically.

Take hold of the

door and pull it

open.

Remove the laun-

dry.

Items left in the drum could discolor other

items in the next wash or become discol-

ored themselves.

Remove all items from the drum.

Check the folds in

the door seal for

any foreign ob-

jects.

Tip: Leave the door slightly open.

If you used a capsule, remove it from the

detergent drawer.

Tip: Leave the detergent drawer slightly

open.

Options

You can supplement the wash programs

with options.

SingleWash

For efficiently washing a very small load

(<2.2lb/1kg) in a normal wash program.

The wash duration is reduced. Please

note the following advice:

Important

When adding detergent manually, only

use liquid detergent and use the proper

amount.Use a maximum of 50% of the

specified amount of detergent for ½ load.

The use of bleach is possible.not

SoftSteam

In order to reduce creasing, the laundry

undergoes a smoothing process at the

end of the program. Reducing the maxi-

mum load by 50% will give a better result.

Please note the load information in the

display. Small loads achieve a better re-

sult.

without

SoftSteam

with

SoftSteam

Full load Half load

Half load Small load

Small load Very small load

The garments must be suitable for drying

in a tumble dryer and suitable for 

ironing . 

Buzzer

A buzzer sounds at the end of the pro-

gram. The buzzer sounds until the wash-

ing machine is switched off.

Pre-wash

For laundry with large amounts of dirt,

e.g., dust and sand.

Pre-wash and the use of bleach are not

possible.

The chlorine bleach is added too early.

Only liquid detergent may be added to

the chamber of the detergent

drawer.

Powder detergent clogs up the 

chamber and water can escape from the

detergent drawer.

Gentle

Drum rotation and wash duration is re-

duced. Lightly soiled items are washed

more gently.

Eco

The Economy option helps to save en-

ergy. The wash temperature is reduced

and the wash duration is increased in re-

turn. The wash program continues to pro-

vide a deep clean.

ExtraRinse

An extra rinse can be activated to achieve

a more thorough wash result.

Soak

For heavily soiled and stained items with

protein stains. A duration of between

30minutes and 6hours can be selected

for the soak process. See “Settings” for

more information.

The factory default setting is 30minutes.

AllergyWash

This option should be used where high

standards of hygiene are required. Energy

consumption is increased to lengthen

temperature holding times and water con-

sumption is increased to improve rinsing

efficiency. The items must be suitable for

drying in a tumble dryer and suitable 

for ironing . 

Before the first use Operation Preparing the laundry Selecting a program Starting a program Options

 fold here  fold here  fold here  fold here  fold here  fold here

en-US M.-Nr. 11 622 890WXI 860

 fold here  fold here  fold here  fold here  fold here  fold here

PROGRAM OVERVIEW

CLEANING AND CARE

FREQUENTLY ASKED QUESTIONS...

Program overview Detergent Cleaning and care Frequently asked questions...

Program Temperature Speed Load

Normal Warm +Hot +, Hot, , Warm, Cold , Max Full load (17.6lb/8kg)

Cotton, linen, and mixed-fiber fabrics made of both cotton and linen.

Proofing Warm + High, , Slow, , Med Small load (5.5lb/2.5kg)

Treating microfiber fabric, ski wear, or table linens/drapes made from mainly synthetic fibers to provide a finish which is resistant to water and dirt.

Delicates Warm +Hot +, Hot, , Warm, Cold Med, Slow, , Small load (6.6lb/3kg)

For delicate fabrics made from synthetic fibers.

Sanitize Sanitize Max, High, , Full load (17.6lb/8kg)

Cotton or linen fabrics with direct skin contact or for which special hygiene requirements apply.

Handwash Warm +Hot, , Cold High, Med, Slow, , Small load (4.4lb/2kg)

For delicate fabrics which are only suitable for hand washing.

Dress Shirts Warm +Hot +, Hot, , Warm, Cold Med, Slow, , Small load (4.4lb/2kg)

Pre-treat collars and cuffs depending on the level of soiling.

MobileStart

The Miele app is used to select programs and operate the appliance.

QuickIntenseWash Warm +Hot +, Max, High, Med, Slow, , Full load (11lb/5kg)

For lightly or moderately soiled fabrics which are also suitable for washing in the Normal program.

Express WarmWarm +, , Cold High, Med, Slow, , Half load (7.7lb/3.5kg)

Cotton fabrics that have hardly been worn or are only very lightly soiled.

Darks/Denims Warm +, Warm, Cold High, Med, Slow, , Small load (4.4lb/2kg)

Black and dark garments made from cotton, mixed fibers, and denim.

Extra White Hot + Max, High, , Full load (17.6 lb/8kg)

For white fabrics made of cotton or linen without special hygiene requirements.

Outdoor Warm +, Warm, Cold Med, Slow, , Small load (5.5lb/2.5kg)

Performance outerwear (e.g., jackets and pants) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc.

Table Linens/Drapes Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Full load (13.2 lb/6kg)

Table linen and drapes made of cotton and linen.

Sportswear Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Half load (7.7lb/3kg)

Sportswear such as jerseys and leggings, as well as microfiber and fleece garments.

Woolens Warm , Cold High, Med, Slow, , Small load (4.4lb/2kg)

Wool or wool-blend fabrics.

Silks Warm , Cold Slow, , Very small load (2.2lb/1kg)

Silks and other hand-washable fabrics with no wool content. Place tights, bras, etc., in a laundry bag.

Wrinkle-free Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Half load (8.8lb/4kg)

Synthetic or mixed-fiber fabrics, or wrinkle-free cotton.

Baby Clothes Hot +, Hot, Warm +, Warm, Cold Max, High, Med, Slow, , Full load (13.2 lb/6kg)

Baby Clothes, baby towels, bath gowns, toweling items, bibs made from cotton.

Towels WarmHot +, Hot, Warm +, , Cold Max, High, Med, Slow, , Full load (11 lb/5kg)

For linen or cotton towels used for personal hygiene.

Downs Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Small load (4.4lb/2kg)

Jackets, sleeping bags, pillows, and other down-filled items.

Pillows Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , 2 pillows (40x80cm) or

1 pillow (80x80cm)

Washable pillows with synthetic filling.

Clean Machine Sanitize Slow Without load

With frequent washing at low temperatures there is a danger of a build-up of bacteria in the washing machine.

Cleaning the washing machine will significantly reduce bacteria and prevent the build-up of unpleasant odors.

Detergents recommended by Miele

Miele

UltraPhase1 and 2

Miele Capsules

  

Normal   –

Proofing – – –

Delicates    –

Sanitize   –

Handwash – – 

Dress Shirts   –

QuickIntenseWash – – –

Express  – –

Darks/Denims  – –

Extra White   –

Outdoor – – –

Table Linens/Drapes   –

Sportswear – – –

Woolens – – –

Silks – – –

Wrinkle-free   –

Quick Rinse – – –

Baby Clothes   –

Towels   –

Downs – – –

Pillows – – –

 Recommendation Special-purpose detergents (e.g., Wool-

Care)

–No recommendation Fabric care (e.g., fabric softener)

Additives (e.g., booster)

Cleaning the detergent drawer

Washing at low temperatures and the use

of liquid detergent can lead to a build-up

of bacteria in the detergent drawer.

Clean the entire drawer at regular inter-

vals for hygiene reasons, even if you are

using the TwinDos system exclusively.

Pull out the deter-

gent drawer until a

resistance is felt.

Press down the release button and, at

the same time, pull the drawer com-

pletely out of the machine.

Removing and cleaning the insert for

liquid detergents

An insert for liquid detergents is located in

the compartment of the detergent

drawer.

Remove the in-

sert. Clean the in-

sert thoroughly

with warm water.

Cleaning the siphon inside the

compartment

Compartment 1 has a siphon for better dis-

pensing of the chlorine bleach.

Remove the re-

lease catch.

Remove the

siphon and clean

under warm run-

ning water.

Cleaning the siphon inside the

compartment

Remove the

siphon from the

compartment

and clean under

warm running wa-

ter.

Clean all compartments with warm wa-

ter.

Cleaning the detergent-drawer housing

Use a bottle brush

to remove deter-

gent residues and

limescale from the

jets inside the de-

tergent-drawer

housing.

Replace the detergent drawer.

Tip: Leave the detergent drawer slightly

open to allow it to dry.

Sanitize info (cleaning the drum)

Washing at low temperatures and/or using

liquid detergents can cause bacteria and

odors to build up in the washing machine.

Use the program to cleanClean Machine

the washing machine. Note the message in

the display: Sanitize info: Run a high temp.

program or the “Clean Machine” program

PrProblem

oblem

oblemoblem P

PPossible cause and solution

ossible cause and solution

ossible cause and solutionossible cause and solution

The control field remains

dark.

There is no power to the machine.

Check whether the plug is plugged in.

Check whether the fuse has tripped.

The washing machine has switched off automatically to

save energy.

Switch the washing machine on again by turning the pro-

gram selector.

The following appears in

the display:

 Service Door release

fault F35

The door is not closed properly. The door lock could not

engage.

Close the door again.

Start the program again.

If the fault message appears again, contact Miele Cus-

tomer Service.

 Drainage See  The drain is blocked or restricted.

The drain hose has been fixed too high.

Clean the drain filter and the drain pump.

The maximum drain height is 39 ³⁄₈" (1m).

 Water intake See  The water intake is blocked or restricted.

Check whether the faucet is turned on properly.

Check whether the intake hose is kinked.

Check whether there is sufficient water pressure.

The filter in the water intake is blocked.

Clean the filter.

 Waterproof system Turn

off   Service

The water protection system has reacted.

Close the faucet.

Contact Customer Service.

  Service Fault F There is a fault.

Disconnect the washing machine from the power supply.

Unplug the appliance or switch off the breaker.

Wait before reconnecting the wash-at least 2minutes

ing machine to the power supply.

Switch the washing machine on again.

Restart the program.

If the fault message appears again, contact Miele Cus-

tomer Service.

PrProblem

oblem

oblemoblem P

PPossible cause and solution

ossible cause and solution

ossible cause and solutionossible cause and solution

 Check dosage Excessive foam has built up during washing.

With TwinDos, check the dosage amount set.

Reduce the amount set in 10% increments.

Use less detergent next time and follow the manufac-

turer’s instructions on dosage given on the packaging.

 Sanitize info: Run a high

temp. program or the “Clean

Machine” program

When washing, a wash program using a temperature

above 60°C (140°F) has not been run for a long time.

Turn the program selector to the /Additional programs 

setting and select the program in the CareClean Machine

submenu.

Run the program using the Miele MachineClean Machine

Cleaner or a universal powder detergent.

The washing machine is cleaned which prevents bacteria

and odor buildup.

 Align the washing machine The extra option which runs at the end of theSoftSteam

program could not be carried out properly.

Check whether the washing machine is aligned correctly

(see “Installation – Leveling the machine”).

Check whether the maximum drain height of 39 ³⁄₈" (1m)

has been exceeded.

If the fault message appears again, contact Miele Customer

Service. The washing machine can still be used, but without

the extra option.SoftSteam

  is almost empty. Only a

few more cycles are possible

The detergent in the cartridge is running low. There is

enough left for approx. 4to 8wash programs.

Order a new cartridge.

The following appears in

the display:

 Service Door release

fault F35

The door lock has jammed.

Contact Customer Service.

Quick Start Guide

Washing machine

This Quick Start Guide is not a substitute for the operating instructions supplied with the

appliance! It is essential to familiarize yourself with the washing machine before using it for

the first time. Please read the operating instructions carefully and pay particular attention

to the IMPORTANT SAFETY INSTRUCTIONS.

en-US M.-Nr. 11 622 890 / 00

 fold here  fold here  fold here  fold here  fold here  fold here

Product specificaties

Merk:	Miele
Categorie:	Wasmachine
Model:	WXI860 WCS

Heb je hulp nodig?

Als je hulp nodig hebt met Miele WXI860 WCS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Miele

Miele WCD174 WCS Handleiding

21 November 2024

Miele WEF674 WCS Handleiding

21 November 2024

Miele WMR 863 WPS Handleiding

21 November 2024

Miele PT 7135 C Vario Handleiding

21 November 2024

Miele WDB 030 Eco Handleiding

21 November 2024

Miele W 1613 Handleiding

21 November 2024

Miele W 3844 WPS Handleiding

21 November 2024

Miele W 2515 WPS Handleiding

21 November 2024

Miele WKF 131 WPS Handleiding

21 November 2024

Miele WWK360 WCS PWash&10kg Handleiding

18 Juni 2024

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Bosch WAU28S70 Handleiding

22 November 2024

Bosch Serie 6 WAU28PH2ES Handleiding

22 November 2024

Bosch WGA142X2TR Handleiding

22 November 2024

LG WF-79X3 Handleiding

22 November 2024

Edesa EWF-7400 X Handleiding

22 November 2024

Smeg WN04SEA Handleiding

21 November 2024

Smeg WHT814ASIT Handleiding

21 November 2024

Smeg WHT712LCIT Handleiding

21 November 2024

Smeg LBW710IT3 Handleiding

21 November 2024

Smeg WHT812LSIT Handleiding

21 November 2024