Miele WXF 660 WCS Handleiding

Miele Wasmachine WXF 660 WCS

Lees hieronder de 📖 handleiding in het Nederlandse voor Miele WXF 660 WCS (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
 fold here  fold here  fold here  fold here  fold here  fold here
OPERATION
PREPARING THE LAUNDRY/SELECTING A PROGRAM
ADDING LAUNDRY
Damage from incorrect installation
and connection.
Installing and connecting the washing ma-
chine incorrectly will cause serious dam-
age to property.
See “Installation”.
Damage resulting from failure to re-
move the shipping struts.
Failure to remove the shipping struts can
result in damage to the washing machine
and to adjacent cabinetry or appliances.
Remove the shipping struts as described
in “Installation and connection”.
Switching on the washing machine
Turn the program selector to the Normal
program.
The welcome tone will sound and the wel-
come screen will light up.
The display will now guide you through the
initial commissioning process, which is di-
vided into 5steps.
For additional information, please refer to
the separate operating instructions sup-
plied.
 
 
Operating the sensor buttons
The sensor buttons react to fingertip con-
tact. If a sensor button is illuminated, it can
be selected.
If a sensor button is brightly lit, this means:
currently selected
If a sensor button is dimly lit, this means:
selection possible
aControl field
The control field consists of a display
and various sensor buttons.
bDisplay
Various values are displayed and/or se-
lected on the display.
c sensor buttons
The values in the display can be
changed with the sensor buttons.
dOKsensor button
Confirm the selected values with the
OKsensor button.
eTwinDos sensor button with the ad-
ditional Whites and Colors sensor
buttons
Deactivate or activate automatic deter-
gent dispensing via the TwinDos sensor
button.
fOptical interface
This is used by the Service department
as a transmission point.
gSensor buttons for options
You can supplement the wash pro-
grams with options.
hsensor button
You can view information about the en-
ergy and water consumption of your
washing machine with the sensor
button.
isensor button
The sensor button starts the Delay
Start function.
jsensor button
You can specify the degree of soiling of
the load in 3settings. This sensor but-
ton is only active when the TwinDos op-
tion is activated.
kStart Add laundry/ sensor button
Touching the /Start Add laun-
drysensor button starts the se-
lected program. The sensor but-
ton lights up constantly.
Once the program has been
started, the /Start Add laun-
drysensor button allows you to
add laundry.
lsensor button
Activates CapDosing via the detergent
drawer.
mProgram selector
For selecting programs and for switch-
ing the machine off. The washing ma-
chine is switched on when you select a
program, and switched off by turning
the program selector to the position.
Environmentally friendly washing
- Make use of the maximum load that the
wash program can accommodate. This
will keep energy and water consumption
to a minimum in relation to the size of the
load.
- Use the program for small, lightlyExpress
soiled loads.
- Modern detergents make it possible to
wash at lower temperatures (e.g.,
70°F/20°C). Using the corresponding
temperature settings will save energy.
- Washing at low temperatures and/or us-
ing liquid detergents can cause bacteria
and odors to build up in the washing ma-
chine. Miele therefore recommends
cleaning the washing machine once ev-
ery month.
The washing machine provides you with
a reminder with the message Sanitize
info: Run the “Sanitize” or “Clean Ma-
chine” program in the display.
1. Preparing the laundry
Empty all pockets.
Damage due to foreign ob-
jects.
Nails, coins, paper clips, and so on
can cause damage to garments
and components in the machine.
Check the laundry before wash-
ing and remove any such foreign
objects.
Sort the laundry by color and by care label. Most gar-
ments have a textile care label in the collar or side
seam.
Pre-treat stains and badly soiled areas.
2. Selecting a program
There are three possible ways to select a program.
1. Selecting the standard programs with the program
selector dial
Turn the program selector to the required program. The
selected program will be shown in the display. This will
then be replaced by the standard display.
2. Selecting additional programs by setting the
program selector to “Additional programs/ ” and
using the display.
Turn the program selector to the /Additional programs
position. The following appears in the display:Table
Linens/Drapes
Touch the sensor buttons until the program you
want appears in the display.
Confirm the program with the OK sensor button.
3. Selecting additional programs by setting the
program selector to MobileStart and using the
Miele app
Turn the program selector to the posi-MobileStart
tion.
The following appears in the display:
Load laundry, close the door and press “Start”. Appliance
can be remotely controlled
Follow the instructions in the display and start the pro-
gram.
The following appears in the display:
MobileStart 
The washing machine can now be operated with the Miele
app.
3 5
1 2
4
1Detergent drawer
2Control panel
3Drain filter
4Door
5TwinDos dispensing
3. Loading the washing machine
Opening the door
Take hold of the door and pull it
open.
Unfold the laundry and load
loosely into the drum.
Closing the door
Make sure that no items are
caught between the door and
the seal.
Shut the door gently.
4. Selecting program settings
Selecting a temperature/spin speed
Touch the sensor buttons above or below the tem-
perature or spin speed value in the display until the tem-
perature/spin speed you want appears in the display.
Selecting options
There are 2 ways of selecting options.
1. Directly via the sensor buttons
Touch the sensor button for the required option. It will
then light up brightly.
2. Via the Options sensor button and the display
Touch the Options sensor button. The following ap-
pears in the display: No Options
Touch the sensor buttons until the option you want
appears in the display and confirm this with the OK sen-
sor button.
Degree of soiling
The sensor button is only active when
the TwinDossensor button is activated.
- Light
No visible soiling or stains
- Normal
Visibly soiled and/or just a few slight
stains
- Heavy
Heavily soiled and/or stains clearly visible
Delay Start/SmartStart
Delay Start
With the Delay Start function, you can delay
the start of the program. The start of the
program can be delayed from 15minutes
up to a maximum of 24hours.
SmartStart
The SmartStart function lets you define a
time period during which your washing ma-
chine will start automatically. The washing
machine is started via a signal, e.g., from
your energy supplier, that indicates that the
electricity rate is particularly economical.
5. Add detergent
There are several options for adding deter-
gent to the washing machine.
TwinDos
TwinDos dispensing is automatically acti-
vated for all programs in which dispensing
is possible.
Changing TwinDos dispensing
You can change the suggested color com-
position of the laundry.
Touch the or sensor but-Whites Colors
ton.
Deactivating TwinDos dispensing
Touch the TwinDossensor button. The
sensor button is only dimly lit and dis-
pensing is deactivated.
Filling with detergent
This washing machine requires particularly
efficient detergent. Add detergent in accor-
dance with the value in the pull-down
dosage display.
Ensure that TwinDos dispensing is deacti-
vated.
Pull out the deter-
gent drawer and
add detergent to
the compart-
ments.
Chlorine bleach for removing
stains or liquid detergent for the
pre-wash
Detergent for the main wash,
including Soak if selected
Fabric softener, liquid starch, or
caps
CapDosing
If you selected CapDosing when setting the
program, detergent will be dispensed via
the capsule for this wash program.
Using powder detergent
The detergent drawer contains an insert for
liquid detergent in the compartment.
This insert must be removed to use powder
detergent. It is not possible to use powder
detergent in the compartment.
Using chlorine bleach
Damage due to chlorine bleach.
Textiles may be discolored or their fibers
damaged.
Only use chlorine bleach on suitable tex-
tiles.
Chlorination must be activated in the set-
tings before chlorine bleach is first used.
The option must not be se-Pre-wash
lected.
Pour of bleachmax. 1/4 cup (60ml)
into the chamber.
The chlorine bleach is added automatically
10minutes before the end of the main
wash.
6. Start the program
Touch the flashing /Start Add laundry
sensor button.
The door will lock and the wash program
will start.
The program status will appear in the dis-
play.
Adding laundry during a program
sequence
Laundry can be added or removed at any
time, provided that the symbol is not illu-
minated in the display.
Touch the / sensor but-Start Add laundry
ton.
The following appears in the display:
Please wait
Wait until the following display lights up:
Door can be opened
Open the door and add or remove laun-
dry.
Close the door.
Touch the / sensor but-Start Add laundry
ton.
The wash program will continue.
7. Program end
The door is locked in the Anti-crease
phase. The display alternates between:
End/Anti-Crease Press Start button and
Unlock the door either by touching the
Start Add laundry/ sensor button or by
turning the program selector to the
position.
The door will unlock.
Tip: After the Anti-crease phase, the door
will unlock automatically.
Take hold of the
door and pull it
open.
Remove the laun-
dry.
Items left in the drum could discolor other
items in the next wash or become discol-
ored themselves.
Remove all items from the drum.
Check the folds in
the door seal for
any foreign ob-
jects.
Tip: Leave the door slightly open.
If you used a capsule, remove it from the
detergent drawer.
Tip: Leave the detergent drawer slightly
open.
Options
You can supplement the wash programs
with options.
SoftSteam
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the program. Reducing the maxi-
mum load by 50% will give a better result.
Please note the load information in the
display. Small loads achieve a better re-
sult.
without
SoftSteam
with
SoftSteam
Full load Half load
Half load Small load
Small load Very small load
The garments must be suitable for drying
in a tumble dryer and suitable for 
ironing . 
Pre-wash
For laundry with large amounts of dirt,
e.g., dust and sand.
Pre-wash and the use of bleach are not
possible.
The chlorine bleach is added too early.
Only liquid detergent may be added to
the chamber of the detergent
drawer.
Powder detergent clogs up the
chamber and water can escape from the
detergent drawer.
Buzzer
A buzzer sounds at the end of the pro-
gram. The buzzer sounds until the wash-
ing machine is switched off.
Gentle
Drum rotation and wash duration is re-
duced. Lightly soiled items are washed
more gently.
ExtraRinse
An extra rinse can be activated to achieve
a more thorough wash result.
Soak
For heavily soiled and stained items with
protein stains. A duration of between
30minutes and 6hours can be selected
for the soak process. See “Settings” for
more information.
The factory default setting is 30minutes.
AllergyWash
This option should be used where high
standards of hygiene are required. Energy
consumption is increased to lengthen
temperature holding times and water con-
sumption is increased to improve rinsing
efficiency. The items must be suitable for
drying in a tumble dryer and suitable 
for ironing .
Before the first use Operation Preparing the laundry Selecting a program Starting a program Options
 fold here  fold here  fold here  fold here  fold here  fold here
en-US M.-Nr. 11 622 870WWF 660, WXF 660
 fold here  fold here  fold here  fold here  fold here  fold here
PROGRAM OVERVIEW
CLEANING AND CARE
FREQUENTLY ASKED QUESTIONS...
Program overview Detergent Cleaning and care Frequently asked questions...
Program Temperature Speed Load
Normal Warm +Hot +, Hot, , Warm, Cold , Max Full load (17.6lb/8kg)
Cotton, linen, and mixed-fiber fabrics made of both cotton and linen.
Delicates Warm +Hot +, Hot, , Warm, Cold Med, Slow, , Small load (6.6lb/3kg)
For delicate fabrics made from synthetic fibers.
Sanitize Sanitize Max, High, , Full load (17.6lb/8kg)
Cotton or linen fabrics with direct skin contact or for which special hygiene requirements apply.
Handwash Warm +Hot, , Cold High, Med, Slow, , Small load (4.4lb/2kg)
For delicate fabrics which are only suitable for hand washing.
Dress Shirts Warm +Hot +, Hot, , Warm, Cold Med, Slow, , Small load (4.4lb/2kg)
Pre-treat collars and cuffs depending on the level of soiling.
Darks/Denims Warm +, Warm, Cold High, Med, Slow, , Small load (4.4lb/2kg)
Black and dark garments made from cotton, mixed fibers, and denim.
MobileStart
The Miele app is used to select programs and operate the appliance.
Express WarmWarm +, , Cold High, Med, Slow, , Half load (7.7lb/3.5kg)
Cotton fabrics that have hardly been worn or are only very lightly soiled.
Extra White Hot + Max, High, , Full load (17.6 lb/8kg)
For white fabrics made of cotton or linen without special hygiene requirements.
Outdoor Warm +, Warm, Cold Med, Slow, , Small load (5.5lb/2.5kg)
Performance outerwear (e.g., jackets and pants) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc.
Proofing Warm + High, , Slow, , Med Small load (5.5lb/2.5kg)
Treating microfiber fabric, ski wear, or table linens/drapes made from mainly synthetic fibers to provide a finish which is resistant to water and dirt.
Table Linens/Drapes Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Full load (13.2 lb/6kg)
Table linens and drapes made of cotton and linen.
Sportswear Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Half load (7.7lb/3kg)
Sportswear such as jerseys and leggings, as well as microfiber and fleece garments.
Woolens Warm , Cold High, Med, Slow, , Small load (4.4lb/2kg)
Wool or wool-blend fabrics.
Silks Warm , Cold Slow, , Very small load (2.2lb/1kg)
Silks and other hand-washable fabrics with no wool content. Place tights, bras, etc., in a laundry bag.
Wrinkle-free Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Half load (8.8lb/4kg)
Synthetic or mixed-fiber fabrics, or wrinkle-free cotton.
Baby Clothes Hot +, Hot, Warm +, Warm, Cold Max, High, Med, Slow, , Full load (13.2 lb/6kg)
Baby clothes, baby towels, bath gowns, toweling items, bibs made from cotton.
Towels WarmHot +, Hot, Warm +, , Cold Max, High, Med, Slow, , Full load (11 lb/5kg)
For linen or cotton towels used for personal hygiene.
Downs Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , Small load (4.4lb/2kg)
Jackets, sleeping bags, pillows, and other down-filled items.
Pillows Warm +Hot +, Hot, , Warm, Cold High, Med, Slow, , 2pillows (40x80cm) or
1pillow (80x80cm)
Washable pillows with synthetic filling.
Clean Machine Sanitize Slow Without load
With frequent washing at low temperatures there is a danger of a build-up of bacteria in the washing machine.
Cleaning the washing machine will significantly reduce bacteria and prevent the build-up of unpleasant odors.
Detergents recommended by Miele
Miele
UltraPhase1 and 2
Miele Capsules
  
Normal  
Delicates  
Sanitize  
Handwash – – 
Dress Shirts  
Darks/Denims  – –
Express  – –
Extra White  
Outdoor – –
Proofing – –
Table Linens/Drapes  
Sportswear – –
Woolens  – –
Silks  – –
Wrinkle-free  
Quick Rinse – –
Baby Clothes  
Towels  
Downs – –
Pillows – – –
 Recommendation Special-purpose detergents (e.g., Wool-
Care)
No recommendation Fabric care (e.g., fabric softener)
Additives (e.g., booster)
Cleaning the detergent drawer
Washing at low temperatures and the use
of liquid detergent can lead to a build-up
of bacteria in the detergent drawer.
Clean the entire drawer at regular inter-
vals for hygiene reasons, even if you are
using the TwinDos system exclusively.
Pull out the deter-
gent drawer until a
resistance is felt.
Press down the release button and, at
the same time, pull the drawer com-
pletely out of the machine.
Removing and cleaning the insert for
liquid detergents
An insert for liquid detergents is located in
the compartment of the detergent
drawer.
Remove the in-
sert. Clean the in-
sert thoroughly
with warm water.
Cleaning the siphon inside the
compartment
Compartment 1 has a siphon for better dis-
pensing of the chlorine bleach.
Remove the re-
lease catch.
Remove the
siphon and clean
under warm run-
ning water.
Cleaning the siphon inside the
compartment
Remove the
siphon from the
compartment
and clean under
warm running wa-
ter.
Clean all compartments with warm wa-
ter.
Cleaning the detergent-drawer housing
Use a bottle brush
to remove deter-
gent residues and
limescale from the
jets inside the de-
tergent-drawer
housing.
Replace the detergent drawer.
Tip: Leave the detergent drawer slightly
open to allow it to dry.
Sanitize info (cleaning the drum)
Washing at low temperatures and/or using
liquid detergents can cause bacteria and
odors to build up in the washing machine.
Use the program to cleanClean Machine
the washing machine. Note the message in
the display: Sanitize info: Run a high temp.
program or the “Clean Machine” program
Pr
Pr
Pr
PrProblem
oblem
oblem
oblemoblem P
P
P
PPossible cause and solution
ossible cause and solution
ossible cause and solution
ossible cause and solutionossible cause and solution
The control field remains
dark.
There is no power to the machine.
Check whether the plug is plugged in.
Check whether the fuse has tripped.
The washing machine has switched off automatically to
save energy.
Switch the washing machine on again by turning the pro-
gram selector.
The following appears in
the display:
 Service Door release
fault F35
The door is not closed properly. The door lock could not
engage.
Close the door again.
Start the program again.
If the fault message appears again, contact Miele Cus-
tomer Service.
Drainage See  The drain is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the drain pump.
The maximum drain height is 39 ³⁄₈" (1m).
Water intake See  The water intake is blocked or restricted.
Check whether the faucet is turned on properly.
Check whether the intake hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water intake is blocked.
Clean the filter.
Waterproof system Turn
off   Service
The water protection system has reacted.
Close the faucet.
Contact Customer Service.
 Service Fault F There is a fault.
Disconnect the washing machine from the power supply.
Unplug the appliance or switch off the breaker.
Wait before reconnecting the wash-at least 2minutes
ing machine to the power supply.
Switch the washing machine on again.
Restart the program.
If the fault message appears again, contact Miele Cus-
tomer Service.
Pr
Pr
Pr
PrProblem
oblem
oblem
oblemoblem P
P
P
PPossible cause and solution
ossible cause and solution
ossible cause and solution
ossible cause and solutionossible cause and solution
Check dosage Excessive foam has built up during washing.
With TwinDos, check the dosage amount set.
Reduce the amount set in 10% increments.
Use less detergent next time and follow the manufac-
turer’s instructions on dosage given on the packaging.
Sanitize info: Run a high
temp. program or the “Clean
Machine” program
When washing, a wash program using a temperature
above 60°C (140°F) has not been run for a long time.
Turn the program selector to the /Additional programs
setting and select the program in the CareClean Machine
submenu.
Run the program using the Miele MachineClean Machine
Cleaner or a universal powder detergent.
The washing machine is cleaned which prevents bacteria
and odor buildup.
Align the washing machine The extra option which runs at the end of theSoftSteam
program could not be carried out properly.
Check whether the washing machine is aligned correctly
(see “Installation – Leveling the machine”).
Check whether the maximum drain height of 39 ³⁄₈" (1m)
has been exceeded.
If the fault message appears again, contact Miele Customer
Service. The washing machine can still be used, but without
the extra option.SoftSteam
 is almost empty. Only a
few more cycles are possible
The detergent in the cartridge is running low. There is
enough left for approx. 4to 8wash programs.
Order a new cartridge.
The following appears in
the display:
 Service Door release
fault F35
The door lock has jammed.
Contact Customer Service.
Quick Start Guide
Washing machine
This Quick Start Guide is not a substitute for the operating instructions supplied with the
appliance! It is essential to familiarize yourself with the washing machine before using it for
the first time. Please read the operating instructions carefully and pay particular attention
to the IMPORTANT SAFETY INSTRUCTIONS.
en-US M.-Nr. 11 622 870 / 00
 fold here  fold here  fold here  fold here  fold here  fold here


Product specificaties

Merk: Miele
Categorie: Wasmachine
Model: WXF 660 WCS

Heb je hulp nodig?

Als je hulp nodig hebt met Miele WXF 660 WCS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Miele

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Bosch

Bosch WAU28S70 Handleiding

22 November 2024
Bosch

Bosch WGA142X2TR Handleiding

22 November 2024
LG

LG WF-79X3 Handleiding

22 November 2024
Edesa

Edesa EWF-7400 X Handleiding

22 November 2024
Smeg

Smeg WN04SEA Handleiding

21 November 2024
Smeg

Smeg WHT814ASIT Handleiding

21 November 2024
Smeg

Smeg WHT712LCIT Handleiding

21 November 2024
Smeg

Smeg LBW710IT3 Handleiding

21 November 2024
Smeg

Smeg WHT812LSIT Handleiding

21 November 2024