Miele W1 WCR870 Handleiding

Miele Wasmachine W1 WCR870

Lees hieronder de 📖 handleiding in het Nederlandse voor Miele W1 WCR870 (2 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
WCR 870 WPS en - AU, NZ M.-Nr. 11 016 600/00
Before the first use Operating the washing machine Preparing the laundry Selecting a programme Adding detergent Starting the programme Extras
OPERATING THE WASHING MACHINE
PREPARING THE LAUNDRY/SELECTING A PROGRAMME
ADDING DETERGENT/STARTING THE PROGRAMME
3 5
12
4
ɔDamage resulting from incorrect
installation and connection.
Installing and connecting the washing
machine incorrectly will cause serious
damage.
Please read the separate operating
instructions supplied with the appliance.
ɔDamage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing machine
and to adjacent cabinetry or appliances.
Please read the separate operating
instructions supplied with the appliance.
Switching on the washing machine
ĺPress the button.
The welcome screen will light up.
The display will guide you through the initial
commissioning process, which is divided
into 6steps.
For further information, please refer to the
separate operating instructions.
Touch display and sensor controls
The and Start/Stop sensors and the
sensors in the display react to fingertip
contact.
The Touch display can be scratched by
pointed or sharp objects, e.g. pens.
Only touch the display with your fingertips.
1 sensor
Takes you back a level in a menu.
2 Touch display
3 Start/Stop sensor
Touching the Start/Stop sensor starts the selected programme or cancels a programme that has already been started. The sensor flashes
slowly as soon as it is possible for a programme to be started and then lights up constantly after the programme has started.
4 Optical interface
For service technicians.
5 button
For switching the washing machine on and off. To save energy, the washing machine will switch off automatically. This occurs 15minutes
after the end of the programme/Anti-crease phase, or after being switched on if no further selection is made.
Main menu
After switching on the washing machine,
the main menu will appear in the display.
You access all the important sub-menus
from the main menu.
Touch the sensor at any time to return to
the main menu. Values set previously are
not saved.
Programmes
For selecting the wash programme.
Favourite programmes
You can save up to 12 of your own
customised wash programmes.
MobileControl
With MobileControl you can operate your
washing machine remotely with the
Miele@mobile App.
Washing assistant
The Washing assistant guides you step by
step so that you can select the optimum
wash programme for your laundry.
Maintenance
Maintenance options for the TwinDos
system and the programme Clean machine
are located in the Maintenance menu (see
"Cleaning and care").
Settings
You can alter the washing machine's
electronics to suit changing requirements in
the Settings menu.
Operating the touch display
Scrolling
You can scroll to the right or the left by
swiping your finger across the screen.
The orange bar under the pictures shows
that there are further options to choose
from.
Selecting
Touch an option in the menu to select it.
If there are multiple options, the selected
option will be highlighted in orange.
Pull-down menu
Touch the top edge of the screen in the
middle and drag down with your finger.
1. Preparing the laundry
ĺEmpty all pockets.
ɔForeign objects (e.g. nails,
coins, paper clips, etc.) can
cause damage to garments and
components in the machine.
ĺSort the laundry by colour and by care label. Most
garments have a textile care label in the collar or side
seam.
ĺPre-treat stains and badly soiled areas (see the booklet
"Miele's guide to laundry care").
2. Selecting a programme
ĺTouch the sensor.Programme
ĺScroll to the right of the display until the programme you
want appears.
ĺTouch the sensor for that programme.
The display will change to show the menu.Overview
There are 3 different ways of selecting a programme.
1. Favourites
2. Washing assistant
3. MobileControl
 11:02
2:39
2:59
1:59
1:09h
h h
h
Cottons
Cottons Delicates
Minimum iron
Programmes
Help
 11:02
40 °C 1600
2:39
Cottons
h
Overview
Temperature Spin speed
TwinDos Extras
not selectedColour
 Timer  Save
rpm
1 Detergent dispenser drawer
2 Control panel
3 Access to drain filter, drain pump
and emergency release
4 Door
5 Access panel for TwinDos
containers
3. Selecting programme settings
Selecting the temperature
ĺTouch the Temperature sensor and select the
temperature you want.
Selecting a spin speed
ĺTouch the sensor and select the spin speed Spin speed
you want.
Activating TwinDos
TwinDos dispensing is automatically activated for all
programmes in which dispensing is possible.
1. Switch TwinDos on or off
ĺTouch the TwinDos sensor and select Off or .On
2. Select the detergent
When using Miele's 2-phase system you must set the
colour of the laundry.
If you are using a different type of detergent, this must be
selected.
3. Select the degree of soiling.
ĺSelect Light, Normal or Heavy and confirm your selection
with the sensor.OK
Selecting Extras
ĺTouch the sensor.Extras
ĺSelect one or more Extras and confirm your selection
with the sensor.OK
Activating CapDosing
ĺTouch the CapDosing sensor.
ĺSelect the type of capsule you want.
Stains
ĺTouch the sensor.Stains
ĺSelect the type of stains in your load from the list and
confirm your selection with the sensor.OK
Timer
You can use the Timer to set the finish time or the start
time for a wash programme.
4. Loading the washing machine
Opening the door
ĺTake hold of the
door and pull it
open.
ĺUnfold the
laundry and load
loosely in the
drum.
The maximum load for the programme
selected will appear in the pull-down menu.
Closing the door
ĺMake sure that
no items are
caught between
the door and the
seal.
ĺShut the door
with a gentle
swing.
5. Adding detergent
There are several options for adding
detergent.
TwinDos
TwinDos has to be activated as described
in "Before using for the first time".
Activating TwinDos dispensing
TwinDos dispensing is automatically
activated for all programmes in which
dispensing is possible.
Changing TwinDos dispensing
You can change the suggested colour
composition of the laundry.
ĺTouch the TwinDossensor and select the
colour composition of your laundry.
Deactivating TwinDos dispensing
ĺTouch the TwinDos sensor and then touch
the sensor.Off
Adding detergent
Any detergent suitable for automatic front
loading washing machines can be used
with this appliance. Add detergent in
accordance with the value in the pull-down
dosage display.
Ensure that TwinDos dispensing is
deactivated.
ĺPull out the
detergent drawer
and add
detergent to the
compartments.
Detergent for the pre-wash
Detergent for the main wash,
including Soak if selected
/ Fabric softener, liquid starch or
capsules
Using detergent tablets or pods
Always put detergent tablets or pods
directly in the drum with the laundry.
They cannot be added via the detergent
dispenser drawer.
Using liquid detergent with a pre-wash
Liquid detergent cannot be used for the
main wash if the pre-wash has been
selected.
Use TwinDos dispensing if you are
activating the pre-wash.
CapDosing
If you selected when setting the CapDosing
programme, detergent will be dispensed via
the capsule for this wash programme.
Only one capsule can be selected per wash
programme.
Three different types of capsule are
available:
Fabric care (e.g. fabric softener)
Additives (e.g. detergent enhancers)
Detergent
Each capsule contains the correct amount
for one wash cycle.
Capsules are available to order from Miele
or from the Miele online shop.
ɔCapsules pose a health risk.
The ingredients of capsules can be
hazardous to health if they are swallowed
or come into contact with skin.
Keep capsules out of the reach of
children.
6. Starting the programme
end of the programme
Starting the programme
ĺ
Touch the flashing sensor.Start/Stop
The door will lock ( appears in the display)
and the programme will start.
At the end of the programme
The door is still locked during the Anti-
crease phase and the following will appear
alternately in the display:
Finish/Anti-crease and
Unlock with "Start/Stop"
ĺ
Touch the sensor. The door Start/Stop
will be unlocked.
The door unlocks automatically at the end
of the Anti-crease phase.
ĺPull open the door.
ĺRemove the laundry.
Check that all items have been removed
from the drum.
ĺCheck the folds
in the door seal
for any small
articles, e.g.
buttons, which
might be lodged
there.
ĺSwitch the washing machine off with the
button.
ĺIf applicable, remove the used capsule
from the detergent dispenser drawer.
Close the door. Otherwise there is
a danger of objects being placed
inadvertently in the drum. If these remain
unnoticed and were washed in the next
load, they could damage the laundry. An
open door is also a danger to pets and
children.
Extras
You can use the Extras sensor to
augment the wash programmes.
Quick
The programme duration is reduced.
Mechanical action and energy usage
are increased.
Eco
The Eco Extra helps to save energy.
The wash temperature is reduced and
the wash duration is increased in return.
The wash programme continues to
provide excellent results.
Water plus
The water level in the wash and rinse
stages is increased. You can select by
how much the water level is increased
(see "Settings - Water plus level").
Extra rinse
An additional rinse cycle can be carried
out to give a better rinse result.
SingleWash
For efficiently washing a very small load
(<1kg) in a normal wash programme.
The wash duration is reduced.
Please note the following advice:
Use liquid detergent
Reduce the dosage to a maximum of
50% of the amount quoted for a ½
load
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Follow the instructions in the
display. Small loads give a better result.
The garments must be suitable for
drying in a tumble dryer and  
suitable for ironing  .
Pre-wash
For laundry with large amounts of dirt, e.g.
dust and sand.
Soak
For heavily soiled and stained items with
protein stains.
A duration of between 30minutes
and 6hours can be chosen for the
soak process. See "Settings" for more
information.
The factory default setting is 30minutes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency
is increased through more intense
mechanical action and the application of
more heat energy.
AllergoWash
This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used to
increase rinsing efficiency. The items must
be suitable for drying in a tumble dryer
 . and suitable for ironing
Extra gentle
Drum rotation and wash duration are
reduced. Lightly soiled fabrics are washed
more gently.
Extra quiet
This option reduces noise levels during
the wash programme. Use this if you
want to wash during quiet periods (for
instance, when children are sleeping). The
final spin is automatically reduced to
(Rinse hold). The programme duration is
increased.
Rinse hold
The laundry is not spun after the final rinse
and remains in the rinse water. This helps
prevent creasing if the laundry is not going
to be removed from the drum immediately
after the end of the programme.
en - AU, NZ M.-Nr. 11 016 600
Cleaning and careProgramme chart Detergent Problem solving guide
PROBLEM SOLVING GUIDE
CLEANING AND CARE
PROGRAMME CHART
Quick Start Guide
Washing machine
These short instructions are not a substitute for the operating instructions supplied with
the appliance. Please read the operating instructions supplied with your washing machine
before using it for the first time and take note of the Warning and Safety instructions, as
well as the full descriptions on how to use your appliance.
Miele recommended detergents
Programmes
Miele
UltraPhase
1/2
Miele
Cap
Miele
Cap
Miele
Cap
Cottons  
Minimum iron  
Delicates  
QuickPowerWash – – –
Automatic plus
Woollens – –
Silks – –
Express 20 – –
Shirts  
Denim – –
Dark garments – –
Sportswear – –
Trainers
Down Items – –
Down duvets – –
Pillows – – –
Curtains
First wash – –
Separate rinse – –
= recommended; – = not recommended
  = Sport; = Down items; = WoolCare; = Fabric Softener ; = Booster 
Cleaning the TwinDos system
ɔDamage resulting from dried washing
detergent.
If the system has not been used for a
long time (more than two months), the
detergent in the hoses can become
viscous or dry out. The hoses can
become blocked and would then need to
be cleaned by a service technician.
Clean the TwinDos system.
To clean the system, a refillable TwinDos
container is required (sold separately),
available online at shop.miele.com.
Cleaning the detergent dispenser
drawer
Washing at low temperatures and the use
of liquid detergent can lead to a build-up
of mould and bacteria in the detergent
dispenser drawer.
ĺClean the entire drawer at regular
intervals for hygiene reasons, even if you
are using the TwinDos system exclusively.
ĺPull out the
detergent
dispenser drawer
until a resistance
is felt.
ĺPress down the release button and, at
the same time, pull the drawer right out of
the machine.
ĺClean the detergent dispenser drawer
with warm water.
Cleaning the siphon and the fabric
softener channel
ĺPull the siphon
out of the
compartment
and clean it
under warm
running water.
ĺClean the siphon tube in the same way.
ĺRefit the siphon.
ĺClean the fabric
softener channel
using a brush
and warm water.
ɔLiquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon tube
particularly thoroughly after using liquid
starch a few times.
Cleaning the detergent dispenser
drawer housing
ĺUse a bottle brush to remove detergent
residues and limescale from the jets
inside the detergent dispenser drawer
housing.
Some of the messages in the display are more than one line long. Touch the or sensor  
to read them in full.
Message Possible cause and remedy
The display remains
dark and the Start/Stop
sensor indicator light
does not come on.
There is no power to the machine.
ĺCheck whether the mains plug is plugged in and switched
on.
ĺCheck whether the circuit breaker has tripped.
The washing machine has switched off automatically to save
energy.
ĺSwitch it back on with the button.
Door will not lock. Call
Miele.
The door is not closed properly. The door lock could not
engage.
ĺClose the door again.
ĺStart the programme again. If the fault message appears
again, contact Miele.
Water drainage fault.
Clean the drain filter and
the pump. Check the
drain hose.
The water outlet is blocked or restricted. The drain hose has
been fixed too high.
ĺClean the drain filter and the drain pump.
ĺCheck whether the maximum delivery head of 1m has been
exceeded.
Water intake fault. Turn
on the tap.
The water inlet is blocked or restricted.
ĺCheck whether the tap is turned on properly.
ĺCheck whether the inlet hose is kinked.
ĺCheck whether there is sufficient water pressure.
The filter in the water inlet is blocked.
ĺClean the filter (see the operating instructions).
Waterproof system
activated. Turn off the
tap. Call Miele.
The water protection system has reacted.
ĺTurn off the tap.
ĺCall Miele.
 Fault F
If restart fails, call Miele.
There is a fault.
ĺDisconnect the washing machine from the mains electricity
supply, either by switching it off at the wall socket and
withdrawing the plug, or by disconnecting it at the circuit
breaker.
ĺWait before reconnecting the washing at least 2 minutes
machine to the mains electricity supply.
ĺThen switch the washing machine on again.
ĺRestart the programme.
If the fault message appears again, contact Miele.
The door lock is
jammed. Call Miele.
The door lock is jammed.
ĺCall Miele.
Message Possible cause and remedy
Check detergent Excessive foam has built up during washing.
ĺCheck the amount of detergent dispensed.
ĺ
With automatic detergent dispensing, check the dosage
amount set.
ĺObserve the instructions on the detergent packaging and
the degree of soiling of the laundry.
ĺIf necessary, reduce the dosage amount by increments of
10%.
Hygiene info: Select
"Maintenance" and
start the "Clean
machine" programme.
A programme using a temperature above 60°C has not been
run for a long time.
ĺ
In order to prevent bacteria and unpleasant odours building
up in the machine, run the programme using Clean machine
Miele IntenseClean or powder detergent.
 Align the washing
machine. Laundry not
properly spun.
The Extra which runs at the end of the programme Pre-ironing
could not be carried out properly.
ĺCheck whether the washing machine is aligned correctly
as described in "Installation and connection – Levelling the
machine".
ĺCheck whether the maximum delivery head of 1m has been
exceeded.
If the fault message appears again, contact Miele. The
washing machine can still be used, however without the Pre-
ironing Extra.
Only a few more washes
possible before a new
cartridge is needed for
compartment .
The detergent in the cartridge is running low. There are
between 4and 8wash cycles remaining.
ĺOrder a new cartridge.
Use "TwinDos" or
carry out "TwinDos"
Maintenance in the
"Maintenance" menu.
See the operating
instruction manual for
more information.
TwinDos or automatic dispensing via compartment and⁄or
has not been used for a long time.
ĺUse TwinDos for one of your next loads.
ĺ
Carry out the TwinDos maintenance programme as
described in "Cleaning and care - TwinDos maintenance".
"TwinDos" Maintenance
for compartment 
must be started in the
"Maintenance" menu.
See the operating
instruction manual for
more information.
TwinDos or automatic dispensing via compartment and
or has not been used for a long time. It is possible that
detergent has dried inside the hoses.
ĺ
Carry out the TwinDos maintenance programme
immediately as described in "Cleaning and care - TwinDos
maintenance".
The messages will appear at the end of the programme and when the washing machine is
switched on and need to be confirmed with the sensor.OK
Programme Load (inkg) Temperature Items Extras
Cottons
Cottons
9.0 Cold to 90°C Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.


Minimum iron 4.0 Cold to 60°C Synthetic, mixed fibre and easy care cotton. 

Delicates 3.0 Cold to 60°C Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.


QuickPowerWash 5.0 40°C – 60°C Moderately soiled garments which are also suitable for washing in the
Cottons programme.

Automatic plus 6.0 Cold to 40°C Mixed loads of garments sorted according to colour which are suitable
for the and programmes.Cottons Minimum iron


Woollens 2.0 Cold to 40°C Machine-washable or hand-washable wool or wool blend fabric. If the
care label does not specify a temperature, wash using the cold setting.

Silks 1.0 Cold to 30°C Silks and other hand-washable fabrics with no wool content, e.g. satin,
lace and silk.

Express 20 3.5 Cold to 40°C Cotton garments that have hardly been worn or are only very lightly
soiled.

Shirts 1.0 2.0 Cold to 60°C Shirts and blouses made of cotton and mixed fibre.
If the preset Pre-ironingoption is switched off, the maximum load
capacity is increased to 2.0kg.


Denim 3.0 Cold to 60°C Items made of denim. 

Dark garments 3.0 Cold to 60°C Black and dark items made of cotton or mixed fibres. 

Sportswear 3.0 Cold to 60°C Sportswear such as jersey shirts and leggings, and microfibre and
fleece garments.


Trainers 2 pairs Cold to 40°C Sport shoes only (not leather shoes). 
Outerwear 2.5 Cold to 40°C Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®
etc.


Proofing 2.5 40°C Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Down Items 2.0 Cold to 60°C Jackets, sleeping bags, pillows and other down-filled items. 

Down duvets 2.5 Cold to 60°C Quilts, duvets and pillows with feather or down filling. 

Pillows 2.0 Cold to 60°C Synthetic filled washable pillows. 

Cottons hygiene 9.0 60°C to 90°C Cotton or linen fabrics with direct skin contact or for which special
hygiene requirements apply.


Curtains 2.0 Cold to 40°C Curtains, including net curtains, specified as machine-washable by the
manufacturer.


First wash 2.0 Cold to 40°C New items made of cotton, towelling and polyester fabric. 
Separate rinse 8.0 For rinsing items washed by hand. 
Starch 8.0 Starching table cloths, serviettes and workwear.

Drain/Spin 8.0 Drain only: Select for the spin speed.0 rpm
Clean machine No load 85°C With frequent washing at low temperatures there is a danger of a
build-up of bacteria in the washing machine.
Cleaning the washing machine will significantly reduce bacteria, mould,
and biofilm, and prevent the build-up of unpleasant odours.
  = Quick; = Eco; = Water plus; = Extra rinse; = SingleWash; = Pre-ironing; = Pre-wash; = Soak; = Intensive; = AllergoWash;  
  = Extra gentle; = Extra quiet; = Rinse hold


Product specificaties

Merk: Miele
Categorie: Wasmachine
Model: W1 WCR870

Heb je hulp nodig?

Als je hulp nodig hebt met Miele W1 WCR870 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Miele

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine